Epson Projector Powerlite 1710c User Manual

							81
A
Technical Specifications
General
Type of display Epson poly-silicon TFT active matrix
Resolution
(native format) 1024 × 768 pixels (XGA)
Color reproduction 16.8 million colors
Brightness
1700c  2200 lumens (High Brightness mode)
1700 lumens (Low Brightness mode)
1710c  2700 lumens (High Brightness mode)
2100 lumens (Low Brightness mode)
Contrast ratio 400:1
Image size 30 to 300 inches
Projection distance 3.2 to 39.7 feet (1.0 to 12.1 meters)
Projection methods Front, rear, upside-down (ceiling mount)
Internal sound system 1 W monaural
Optical aspect ratio 4:3 (horizontal:vertical)
Zoom ratio 1:1.2
Noise level 35 dB in Low Brightness mode, 40 dB in 
High Brightness mode
Keystone correction Automatic (manual adjustment capability 
±30° vertical keystone correction)
Mouse compatibility Supports USB (type B) 
						

							82Technical Specifications
Projection Lamp
Type UHE (Ultra High Efficiency)
Power consumption 170 W
Lamp life Approx. 2000 hours (High Brightness 
mode)
Approx. 3000 hours (Low Brightness mode)
Part number V13H010L38
Remote Control
Range 20 feet (6 meters)
Batteries (2) Alkaline AAA
Dimensions
Height 2.7 inches (68 mm), feet retracted 
Width 10.7 inches (273 mm)
Depth 7.6 inches (193 mm)
Weight 3.5 lb (1.6 kg)
Electrical
Rated frequency 50/60 Hz AC
Power supply 100 to 120 VAC, 2.7 A
200 to 240 VAC, 1.2 A
Power consumption Operating: 
100 to 120 VAC, 244 W
200 to 240 VAC, 228 W
Standby: 
100 to 120 VAC, 3.8 W
200 to 240 VAC, 5.1 W 
						

							Technical Specifications83
Environmental
Temperature Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity
(non-condensing) Operating: 20 to 80% RH
Storage: 10 to 90% RH
Operating altitude 0 to 7,500 ft (0 to 2,286 m)
Safety
United States FCC 47CFR Part 15B Class B (DoC)
UL60950 Third Edition
Canada ICES-003 Class B
CSA C22.2 No. 60950
CE Marking Directive 73/23/EEC
Directive 89/336/EEC
IEC 60950 Third Edition
EN 55022, EN 55024
 Pixelworks
™ DNX™ ICs are used in this projector.
Compatible Video Formats
The projector supports NTSC, PAL, and SECAM international video 
standards, as well as the monitor display formats listed below.
To project images output from a computer, the computer’s video card 
must be set at a refresh rate (vertical frequency) that’s compatible with 
the projector. Some images are automatically resized to display in the 
projector’s “native” format (XGA). The frequencies of some 
computers may not allow images to display correctly; see your 
computer’s documentation for details.
Mode Refresh Rate (Hz) Resolution
VGA EGA 70 640 
× 350* 
						

							84Technical Specifications
VGA—60
VESA—72
VESA—75
VESA—8560
72
75
85640 × 480*
640 × 480*
640 × 480*
640 × 480*
SVGA—56
SVGA—60
SVGA—72
SVGA—75
SVGA—8556
60
72
75
85800 × 600*
800 × 600*
800 × 600*
800 × 600*
800 × 600*
XGA—60
XGA—70
XGA—75
XGA—8560
70
75
851024 × 768
1024 
× 768
1024 
× 768
1024 
× 768
SXGA1—70
SXGA1—75
SXGA1—8570
75
851152 
× 864*
1152 × 864*
1152 × 864*
SXGA2—60
SXGA2—75
SXGA2—85
SXGA+60
SXGA+75
SXGA+8560
75
85
60
75
851280 × 960*
1280 × 960*
1280 × 960*
1400 × 1050*
1400 × 1050*
1400 × 1050*
SXGA3—60
SXGA3—75
SXGA3—8560
75
851280 × 1024*
1280 × 1024*
1280 × 1024*
UXGA—60 60 1600 × 1200*
iMAC VGA
iMAC SVGA
iMAC XGA
MAC13
MAC16
MAC19
MAC19-60
MAC21117
95
75
67
75
75
59
75640 × 480*
800 × 600*
1024 × 768
640 
× 480*
832 × 624*
1024 × 768
1024 
× 768
1152 
× 870*
NTSC 
NTSC 4:43
PAL
N-PAL
M-PAL
PAL—60
SECAM60
60
50
50
60
60
50—
—
—
—
—
—
— Mode Refresh Rate (Hz) Resolution 
						

							Technical Specifications85
*The image is resized using Epson’s SizeWise™ Technology. 
HDTV (720p)
HDTV (720p)
HDTV (1080i)
HDTV (1080i)60
50
60
50—
—
—
—
TV480i
TV480i
SDTV (480p)
SDTV (480p)60
50
60
50—
—
—
— Mode Refresh Rate (Hz) Resolution 
						

							86Technical Specifications 
						

							87
A
Notices
This appendix includes safety instructions and other important information 
about your Epson PowerLite projector.
Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
■Do not place the projector on an unstable cart, stand, or table.
■Do not use the projector near water or sources of heat.
■Use the type of power source indicated on the projector. If you are not 
sure of the power available, consult your dealer or power company.
■Place the projector near a wall outlet where the plug can be easily 
unplugged.
■Do not hold the plug with wet hands.
■Take the following precautions for the plug. Failure to comply with 
these precautions could result in sparks or fire: Do not insert the plug 
into an outlet with dust present. Insert the plug firmly into the outlet.
■Do not overload wall outlets, extension cords, or integral convenience 
receptacles. This can cause fire or electric shock.
■Do not place the projector where the cord can be walked on. This may 
result in fraying or damage to the plug.
■Unplug the projector from the wall outlet before cleaning. Use a damp 
cloth for cleaning. Do not use liquid or aerosol cleaners.
■Do not block the slots and openings in the projector case. They provide 
ventilation and prevent the projector from overheating. Do not operate 
the projector on a sofa, rug, or other soft surface, or in a closed-in 
cabinet unless proper ventilation is provided.
■Never push objects of any kind through the cabinet slots. Never spill 
liquid of any kind into the projector. 
						

							88Notices
■Except as specifically explained in this User’s Guide, do not attempt to 
service this product yourself. Refer all servicing to qualified personnel. 
Opening or removing covers may expose you to dangerous voltages and 
other hazards.
■Unplug the projector from the wall outlet and refer servicing to qualified 
service personnel under the following conditions: When the power cord 
or plug is damaged or frayed. If liquid has been spilled into the 
projector, or if it has been exposed to rain or water. If it does not operate 
normally when you follow the operating instructions, or if it exhibits a 
distinct change in performance, indicating a need for service. If it has 
been dropped or the housing has been damaged.
■The lamp(s) in this product contain mercury. Please consult your 
state and local regulations regarding disposal or recycling. Do not put in 
the trash.
■Unplug the projector during lightning storms or when it will not be used 
for extended periods.
■Do not place the projector and/or remote control on top of 
heat-producing equipment or in a hot location.
■If you use the projector in a country other than where you purchased it, 
use the correct power cord for that country.
■Do not stand on the projector or place heavy objects on it.
■Do not use the projector outside of the required temperature range of 41 
to 95 °F (5 to 35 °C). Doing so may cause an unstable display and could 
lead to projector damage.
■Do not store the projector outside of the required temperature range of 
14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of 
time. Doing so may cause damage to the case.
WARNING: The cords included with this product contain chemicals, 
including lead, known to the State of California to cause birth defects or 
other reproductive harm. Wash hands after handling. (Provided in accordance 
with Proposition 65 in Cal. Health & Safety Code §25249.5 et seq.) 
						

							Notices89
Remote Control Information
You can operate the projector by remote control via a line-of-sight infrared 
(IR) receiver at the front and rear of the projector. The projector may not 
respond to remote control commands under the following conditions:
■There is an object between the remote control IR emitter and the IR 
receiver on the projector.
■Ambient light is too bright.
■Certain types of fluorescent lighting are used.
■A strong light source shines into the IR receiver.
■Other equipment that emits infrared energy, such as a radiant room 
heater, is in the room.
These conditions commonly cause problems for most infrared-controlled 
equipment. Try the following:
■The remote control’s batteries may be low on power; replace them.
■Dim the ambient lighting and/or turn off any fluorescent lights.
■Close any window coverings and/or move the projector out of direct 
sunlight.
■Turn off other equipment that emits infrared energy. 
						

							90Notices
Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and 
Peripherals; and/or CPU Boards and Power Supplies used with Class B 
Personal Computers
We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806-2469
Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein, complies 
with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each 
product marketed, is identical to the representative unit tested and found to 
be compliant with the standards. Records maintained continue to reflect the 
equipment being produced can be expected to be within the variation 
accepted, due to quantity production and testing on a statistical basis as 
required by 47CFR §2.909. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may 
cause undesired operation.
Trade Name: Epson
Type of Product: Projector
Model: EMP-1700/1710
Marketing Name: PowerLite 1700c/1710c