Epson Projector PowerLite 1224 User Manual

Locking the Projectors Buttons
You can lock the buttons on the projectors control panel to prevent anyone from using the projector. You
can lock all the buttons or all the buttons except the power button.
1. Press theMenubutton.
2. Select the Settingsmenu and press Enter.
3. Select the Control Panel Lock setting and pressEnter.
4. Select one of these lock types and press Enter:
• To lock all of the projectors buttons, select Full Lock.
• To lock all buttons except the power button, select Partial Lock....

Installing a Security Cable
You can install two types of security cables on the projector to deter theft.
• Use the security slot on the projector to attach a Kensington lock. See your local computer orelectronics dealer for purchase information.
• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
Note: Do not pass drop-prevention cables through the security cable attachment point when mounting
the projector on a wall or...

Setting the Projector ID
Setting the Remote Control ID
Matching Multiple-Projector Display Quality
Parent topic:
Adjusting Projector Features
Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select Projector ID and pressEnter.
4. Use the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter....

2. Make sure you know the projectors ID number as set in the Extended menu
Projector IDsetting.
Note: If you have forgotten the projectors ID, aim the remote at the projector and press the ID
button. The projectors ID will display on the screen temporarily.
3. Aim the remote control at that projector.
4. Hold down the IDbutton on the remote control while you press the numeric button that matches the
projectors ID. Then release the buttons.
5. Press the IDbutton on the remote control to check if the...

4. Press the
Menubutton, select the Imagemenu, and press Enter.
5. Select settings as necessary.
6. Set the remote control ID to match the next projector, then select Image menu adjustments as necessary to match the projectors displays.
Note: The brightness and tint may not match exactly even after adjustments. If brightness and tint
differences become more noticeable over time, repeat the adjustments.
Parent topic: Projector Identification System for Multiple Projector Control
Projecting Two Images...

1. Press the
Splitbutton on the remote control.
The currently selected input source moves to the left side of the screen.
2. Press the Menubutton.
You see this screen:
3. To select an input source for the other image, select the Sourcesetting, press Enter, select the
input source, select Execute, and press Enter. (You can also change image sources, if necessary.)
4. To switch the images, select the Swap Screenssetting and press Enter.
5. To change the image sizes, select the Screen Sizesetting, press...

6. To choose the audio you want to hear, select the
Audio Sourcesetting, pressEnter, select an
audio option, press Enter, and pressMenuto exit.
Note: Select Autoto hear audio from the largest screen or the left screen.
7. To exit the split screen feature, press the SplitorEsc button.
Parent topic: Adjusting Projector Features
Copying Menu Settings Between Projectors After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note:Any saved Users Logo...

2. Insert the flash drive into the
USB-Aport.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3. Press and hold the Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
4. When the power, Status, Lamp, and Temp lights turn on, release the Escbutton.
118   

The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution:
Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic: Copying Menu Settings Between Projectors
Transferring Settings From a USB Flash Drive After saving projector settings to a...

3. Press and hold the
Menubutton on the control panel or remote control as you connect the power
cord to the projectors power inlet.
4. When the power, Lamp, and Temp lights turn on, release the Menubutton.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the...