Epson Projector Powerlite 1221 User Manual
Here you can view all the pages of manual Epson Projector Powerlite 1221 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
1 Power light 2 Lamp light 3 Temperature light Power light Lamp light Temperature Status andsolution light Green Off Off Normal operation. Flashing green Off Off Warming up.Wait foranimage toappear. Orange Off Off Standby orsleep mode. Flashing orange Off Off Preparing formonitoring orshutting down.(When the light remains orange,youcanunplug the projector.) 101
Page 102
Power light Lamp light Temperature Status andsolution light Flashing red Off Flashing orange Projector istoo hot. • Make surethatthevents andairfilter arenot clogged withdust orobstructed bynearby objects. • Make suretheenvironmental temperatureisnot too hot. • Ifoverheating continues,cleanorreplace theair filter. Red Off Red Projector hasoverheated andturned off.Leave it turned offtocool down forfive minutes. • Make surethatthevents andairfilter arenot clogged withdust...
Page 103
Power light Lamp light Temperature Status andsolution light Red orflashing Flashing red Flashing red Internal projector error.Turntheprojector off, red unplug it,and contact Epsonforhelp. Note: Ifthe lights display apattern notlisted inthe table above, turntheprojector off,unplug it,and contact Epsonforhelp. Parent topic:Solving Problems Related references Projector SetupSettings -Extended Menu Where toGet Help Related tasks Cleaning theAirFilter andVents Replacing theAirFilter...
Page 104
Solutions WhenNoImage Appears Solutions WhenImage isIncorrect UsingtheUSB Display Function Solutions WhenNo Signal Message Appears Solutions WhenNot Supported Message Appears Solutions WhenOnlyaPartial ImageAppears Solutions WhentheImage isNot Rectangular Solutions WhentheImage Contains NoiseorStatic Solutions WhentheImage isFuzzy orBlurry Solutions WhentheImage Brightness orColors areIncorrect Solutions WhenThereisNo Sound orLow Volume Parent topic:Solving Problems Solutions WhenNoImage...
Page 105
Input Signal Settings -Signal Menu Projector FeatureSettings -Settings Menu Related tasks Unlocking theProjector s Buttons Solutions WhenImage isIncorrect UsingtheUSB Display Function If no image appears orifthe image appears incorrectly usingtheUSB Display function, trythe following solutions: • Press theUSB button onthe remote control. • Make suretheUSB Type Bsetting inthe Extended menuisset toUSB Display ,if available. • With MacOSX,select theUSB Display iconinthe Dock orfrom...
Page 106
Displaying FromaPC Laptop If you seetheNo Signal message whenyoudisplay fromaPC laptop, youneed toset upthe laptop to display onanexternal monitor. 1. Hold down thelaptops Fnkey and press thekey labelled withamonitor iconorCRT/LCD .(See your laptop manual fordetails.) Waitafew seconds foranimage toappear. 2. Todisplay onboth thelaptops monitorandtheprojector, trypressing thesame keysagain. 3. Ifthe same image isnot displayed bythe laptop andprojector, checktheWindows Displayutilityto make...
Page 107
Solutions WhenOnlyaPartial ImageAppears If only apartial computer imageappears, trythe following solutions: • Press theAuto button onthe remote controltooptimize theimage signal. • Try adjusting theimage position usingthePosition menusetting. • Press theAspect buttononthe remote controltoselect adifferent imageaspect ratio. • Ifyou zoomed intoorout ofthe image usingtheE-Zoom buttons,presstheEsc button toreturn toa full display. • Check yourcomputer displaysettings todisable dualdisplay andsetthe...
Page 108
Solutions WhentheImage Contains NoiseorStatic If the projected imageseems tocontain electronic interference (noise)orstatic, trythe following solutions: • Check thecables connecting yourcomputer orvideo source tothe projector. Theyshould be: • Separated fromthepower cordtoprevent interference • Securely connected atboth ends • Not connected toan extension cable • Check thesettings onthe projectors Signalmenutomake suretheymatch thevideo source. If available foryour video source,...
Page 109
• Position theprojector closeenough tothe screen. • Position theprojector sothe keystone adjustment angleisnot sowide thatitdistorts theimage. • Turn onautomatic keystoneadjustment inthe projectors menus. • Adjust theSharpness settingtoimprove imagequality. • Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically adjust thetracking andsync. Ifany bands oroverall blurriness remains,displayauniformly patterned image onthe screen andmanually adjusttheTracking...
Page 110
Related concepts Projector LampMaintenance Related references Input Signal Settings -Signal Menu Image Quality Settings -Image Menu Projector FeatureSettings -Settings Menu Solutions WhenThere isNo Sound orLow Volume If there isno sound whenyouexpect itor the volume istoo low, trythe following solutions: • Adjust theprojectors volumesettings. • Press theA/V Mute button onthe remote controltoresume videoandaudio ifthey were temporarily stopped. • Press theSource Searchbuttontoswitch tothe...