Epson Projector PowerLite 1040 User Manual
Have a look at the manual Epson Projector PowerLite 1040 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setting OptionsDescription Remote Receiver Front/RearLimits reception of remote control signals by the selected receiver; Front Offturns off all receivers Rear Off User Button Power ConsumptionAssigns a menu option to the Userbutton on the remote Info control for one-touch access Deinterlacing Closed Caption Test Pattern Resolution Display the QR Code Test Pattern —Displays a test pattern to assist in focusing and zooming the image and correcting image shape (pressEscto cancel pattern display) Parent topic: Adjusting the Menu Settings Related tasks Correcting Image Shape with Quick Corner Correcting Image Shape with the Keystone Buttons Correcting Image Shape with the Horizontal Keystone Slider 131
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Options Description Home Screen Home Screen Auto Disp. Select various options for the projectors Home screen Custom Function 1 Home Screen Auto Disp.: controls whether Custom Function 2 the Home Screen displays automatically when the projector is turned on Custom Function 1/Custom Function 2: lets you customize the options displayed on the Home Screen and save your settings as a preset 132
Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the screen Startup Screen Display Background: selects the screen A/V Mute color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts up A/V Mute: selects the screen color or logo to display when A/V Mute is turned on Closed Caption Off Controls use of closed captions and selects the closed caption type (closed captions are CC1 only visible for NTSC signals connected CC2 through theS-VideoorVideo ports) Users Logo — Creates a screen that the projector displays to identify itself and enhance security Projection Front Selects the way the projector faces the screen so the image is oriented correctly Front/Ceiling Rear Rear/Ceiling 133
Setting Options Description Operation Direct Power On Selects various operation options High Altitude Mode Direct Power On: turns on the projector when you plug it in Auto Source Search High Altitude Mode: regulates the projector’s Auto Power On operating temperature at altitudes above 4921 feet (1500 m) Auto Source Search: automatically detects the image signal being input when the projector is turned on Auto Power On: automatically turns on the projector when it receives an image signal (available only whenStandby Modeis set to Communication On) USB Type B USB Display Selects the use of the projectors USB Type B port Link 21L USB Display: select when you connect a computer to the projectors USB Type B port to display images Link 21L: allows a remote Windows computer to operate the projector over a USB connection using the Link 21L Utility Projector ID Off Assigns an ID for the projector when you use multiple projectors 1 through 9 Language Various languages available Selects the language for projector menu and message displays (not changed by Reset option) Parent topic: Adjusting the Menu Settings Related references Projector Setup Settings - ECO Menu Related tasks Saving a Users Logo Image to Display 134
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. Setting OptionsDescription Wireless Mode Wireless LAN OnTurns on wireless LAN support Off Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN Sys. Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code 135
Setting OptionsDescription Display the QR Code —Displays a QR code for connecting with iOS or Android devices using the Epson iProjection app Network Configuration Accesses additional network Configures your network settings menus Parent topic: Adjusting the Menu Settings Related tasks Selecting Wireless Network Settings Manually Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a power-saving setting, a leaf icon appears next to the menu item. 136
Setting OptionsDescription Power Consumption NormalSelects the brightness mode of the projector lamp ECO Normal: sets maximum lamp brightness ECO: reduces lamp brightness and fan noise, and saves power and lamp life Light Optimizer OnWhenPower Consumption is set to Normal, the lamp Off brightness is adjusted based on the projected image; you can set this option for each color mode Sleep Mode OnAutomatically places the projector in standby mode after Off an interval of inactivity Sleep Mode Timer 1 to 30 minutesSets the interval for Sleep Mode Lens Cover Timer OnAutomatically turns off the projector after 30 minutes if the Off lens cover is closed A/V Mute Timer OnAutomatically turns off the projector after 30 minutes if Off A/V Muteis enabled Standby Mode Communication OnCommunication Onindicates that the projector can be Communication Off monitored over a network when the projector is in standby mode ECO Display OnDisplays a leaf icon in the bottom left corner of the projected screen Off to indicate the power-saving status when the lamp brightness changes Parent topic: Adjusting the Menu Settings 137
Related references Projector Setup Settings - Extended Menu Related tasks Shutting Off the Picture and Sound Temporarily Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. SelectVersion to display the projectors firmware version. Select Projector Infoto display the settings described below. Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Information item Description Lamp Hours Displays the number of hours (H) the lamp has been used in Normal andECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon 138
Information item Description Source Displays the name of the port to which the current input source is connected Input Signal Displays the input signal setting of the current input source Resolution Displays the resolution of the current input source Video Signal Displays the video signal format of the current input source Refresh Rate Displays the refresh rate of the current input source Sync Info Displays information that may be needed by a service technician Status Displays information about projector problems that may be needed by a service technician Serial Number Displays the projectors serial number Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code List Parent topic: Adjusting the Menu Settings Related references Projector Lamp Specifications Optional Equipment and Replacement Parts Event ID Code List If theEvent ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code. Event ID code Cause and solution 0432 The EasyMP Network Projection program did not start. Turn the projector off and then on again. 0435 139
Event ID code Cause and solution 0434 Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. 0481 0482 0485 0433 Cannot display the transferred images. Restart the EasyMP Network Projection program. 0484 Communication with computer was disconnected. Restart the EasyMP Network Projection program. 0483 The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again. 04FE 0479 A projector system error has occurred. Turn the projector off and then on again. 04FF 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. 0893 The TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. 0894 Communication with unauthorized access point was disconnected. Contact your network administrator. 0898 Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCPsetting in the Network menus. 0899 A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not solve the problem, contact Epson for help. Parent topic: Projector Information Display - Info Menu Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset Alloption on the Reset menu. 140