Home > Epson > Projector > Epson Projector PowerLite 1040 User Manual

Epson Projector PowerLite 1040 User Manual

Here you can view all the pages of manual Epson Projector PowerLite 1040 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 41

2. Connect the other end of the cable to the projectors
Audioport or ports.
PowerLite Home Cinema 640/740HD
PowerLite Home Cinema 1040
Note: To add additional sound, connect your video source and speakers to an audio video receiver,
then connect the receiver to the projector using one of the receivers compatible video outputs (an
HDMI connection provides the best image quality, if available). You can also connect speakers to
any video source that has its own speaker connections.
Parent topic: Connecting...

Page 42

Parent topic:
Projector Connections
USB Device Projection You can project images and other content without using a computer or video device by connecting any of
these devices to your projector:
• USB flash drive
• Digital camera or smartphone
• USB hard drive
• Multimedia storage viewer
• USB memory card reader
Note:Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,
and must be USB Mass Storage Class-compliant.
Note: USB hard drives must meet these requirements:
•...

Page 43

2. Connect the USB cable (or USB flash drive or USB memory card reader) to the projectors
USB-A
port.
PowerLite Home Cinema 640/740HD
PowerLite Home Cinema 1040
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related topics
Projecting a PC Free Presentation
Selecting the Connected USB Source You can switch the projectors...

Page 44

3. Press the button again to cycle through other USB sources, if available.
Parent topic:
Connecting to External USB Devices
Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device or camera from the projector.
Parent topic:Connecting to External USB Devices
Connecting to a Document...

Page 45

PowerLite Home Cinema 1040
Note:
For additional features supported by software, connect your document camera to your computer
instead of the projector. See the document camera manual for details.
Parent topic: Projector Connections
Related references
Optional Equipment and Replacement Parts
Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector.
Caution:Use only the type of batteries specified in this manual. Do not install batteries of...

Page 46

1. Remove the battery cover.
2. Insert the batteries with the
+and –ends facing as shown.
46   

Page 47

3. Replace the battery cover and press it down until it clicks into place.
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Setting Up the Projector
Related references
Remote Control Specifications
47  

Page 48

Opening the Lens Cover
To open the projectors lens cover, slide the A/V Muteslide lever until it clicks into the open position.
Parent topic: Setting Up the Projector
48  

Page 49

Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
Wireless Network Projection
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Wireless Network Projection You can send images to your projector through a wireless network. To do this, you must install the
Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless...

Page 50

Setting Up Wireless Network Security
Parent topic:
Using the Projector on a Network
Related references
Optional Equipment and Replacement Parts
Product Box Contents
Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the
projector. Do not install any other type of wireless module.
Note:The wireless LAN module is not included with your projector and is optional.
Note: Your product may look different from the illustrations in...
Start reading Epson Projector PowerLite 1040 User Manual

Related Manuals for Epson Projector PowerLite 1040 User Manual

All Epson manuals