Epson Projector PowerLite 1040 User Manual

Display format
Refresh rate (in Hz)Resolution (in pixels)
SDTV (576i) 50720 × 576
SDTV (480p) 60720 × 480
SDTV (576p) 50720 × 576
HDTV (720p) 50/601280 × 720
HDTV (1080i) 50/601920 × 1080
HDMI input signals
VGA 60640 × 480
SVGA 60800 × 600
XGA 601024 × 768
WXGA 601280 × 800
60 1366 × 768
WXGA+ 601440 × 900
WXGA++ 601600 × 900
SXGA 601280 × 960
60 1280 × 1024
SXGA+ 601400 × 1050
UXGA 601600 × 1200
WSXGA+ 601680 × 1050
WUXGA 2
60 1920 × 1200
SDTV (480i/480p) 60720 × 480
SDTV (576i/576p) 50720 × 576
HDTV...

Display format
Refresh rate (in Hz)Resolution (in pixels)
SDTV (480i/480p) 60720 × 480
SDTV (576i/576p) 50720 × 576
HDTV (720p) 50/601280 × 720
HDTV (1080i) 50/601920 × 1080
HDTV (1080p) 24/301920 × 1080
1 Wide resolution only
2 PowerLite Home Cinema 1040 only
Parent topic: Technical Specifications
USB Display System Requirements Your computer system must meet the system requirements here to use the projectors USB Display
software.
Requirement Windows Mac
Operating system Windows XP Professional, Home OS...

Requirement Windows
Mac
CPU Mobile Pentium III 1.2 GHz or faster Power PC G4 1 GHz or faster (Core
(1.6 GHz or faster recommended) Duo 1.83 GHz or faster
recommended)
Memory 256MB or more (512MB or more 512MB or more
recommended)
Hard disk space 20MB or more
Display Resolution between 640 × 480 and Resolution between 640 × 480 and
1920 × 1200, 16-bit color or greater 1920 × 1200, 16-bit color or greater
Parent topic: Technical Specifications
183 

Notices
Check these sections for important notices about your projector.
Recycling
Important Safety Information
Important Safety Instructions
List of Safety Symbols (corresponding to IEC60950-1 A2)
FCC Compliance Statement
Open Source Software License
Trademarks
Copyright Notice
Recycling Epson offers a recycling program for end of life products. Please go to this sitefor information on how to
return your products for proper disposal.
Parent topic: Notices
Important Safety Information Warning:The...

• When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from
loosening and do not use oils or lubricants. This may cause the projector case to crack and the
projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and
could damage the projector.
• Do not use the projector near water, sources of heat, high-voltage electrical wires, or sources of magnetic fields.
• Use the type of power source indicated on the projector....

• Never open any covers on the projector except as specifically explained in this manual. Never attempt
to disassemble or modify the projector. Refer all repairs to qualified service personnel.
• Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: if it does not operate normally when you follow the operating instructions, or
exhibits a distinct change in performance; if smoke, strange odors, or strange noises come from the...

• Do not place the source of an open flame, such as a lit candle, on or near the projector.
• Do not block the lens during projection using a book or any object other than the lens cover. This could
damage the projector or cause a fire.
• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or pull it excessively. Keep the power cord away from hot electrical appliances.
• If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being...

No. Symbol
Approved Standards Description
1 IEC60417ON (power)
No.5007 To indicate connection to the mains.
2 IEC60417OFF (power)
No.5008 To indicate disconnection from the
mains.
3 IEC60417Stand-by
No.5009 To identify the switch or switch position
by means of which part of the equipment
is switched on in order to bring it into the
stand-by condition.
4 ISO7000Caution
No.0434B, To identify general caution when using
the product.
IEC3864-B3.1
5 IEC60417Caution, hot surface
No.5041 To indicate that the...

No. Symbol
Approved Standards Description
8 IEC60417Polarity of DC power connector
No.5926 To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a DC power supply
may be connected.
9 —Polarity of DC power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a DC. power supply
may be connected.
10 IEC60417Battery, general
No.5001B On battery powered equipment. To
identify a device for instance a cover for...

No. Symbol
Approved Standards Description
15 IEC60417Alternating current
No.5032 To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
16 IEC60417Direct current
No.5031 To indicate on the rating plate that the
equipment is suitable for direct current
only; to identify relevant terminals.
17 IEC60417Class II equipment
No.5172 To identify equipment meeting the safety
requirements specified for Class II
equipment according to IEC 61140....