Epson Projector L1500U User Manual

161
•
Bto adjust the blue color convergence
Note: You can adjust only the red or blue color convergence; you cannot adjust the standard green
color panel.
8. Select the Pattern Color setting and press Enter.
9. Select the pattern you want to use and press Esc.
10. Select Start Adjustments and pressEntertwice.
You see this screen:
11. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box.
12. Press the Enterbutton to move to the...

162
You see this screen:
14. Do one of the following: • If your projectors panel alignment is now correct, select Exitand press Enterto return to the
Panel Alignment menu.
• If your projector needs additional panel alignment, select Select intersection and adjustand
press Enter. Use the arrow keys on the remote control to highlight the corner of any box on the
screen that is misaligned and press Enterto adjust the color convergence. Repeat this step as
necessary.
Parent topic: Using Advanced Image...

163
2. Select the
Extendedmenu and press Enter.
3. Select the Displaysetting and press Enter.
4. Select the Color Uniformity setting and pressEnter.
5. Press Enterand select On.
6. Press Esc.
7. Select the Adjustment Level setting and pressEnter.
8. Press the right and left arrow buttons to adjust the level, then press Esc.
9. Select the Start Adjustments setting and pressEnter. 

164
10. Select the area of the screen that you want to adjust and press
Enter.
11. Select the color ( Red,Green, or Blue) you want to adjust, and use the left arrow button to weaken
the color tone and the right arrow button to strengthen the color tone.
12. Press Esc.
13. Repeat steps 10 and 11 for each area you want to adjust.
14. When you are finished, press the Menubutton.
Parent topic: Using Advanced Image Adjustment Features
Using Multiple Projectors You can combine the projected images from two or...

165
3. Do one of the following:
• For automatic adjustment, set an ID for the master projector and the remote control.
• For manual adjustment, set an ID for each projector and the remote control.
4. Adjust each projectors physical position and angle to the screen.
5. Do one of the following: • For automatic adjustment, configure tiling automatically.
• For manual adjustment, configure tiling manually.
6. Adjust the image aspect ratio for each projector.
7. Adjust the position of the image for each...

166
Adjusting the Black Level
Scaling an Image
Related topics
Tiling Images into One Image
Matching Tint and Brightness (Screen Matching)
Projector Identification System for Multiple Projector Control You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
You can also match the colors displayed by any...

167
Repeat these steps for all the other projectors you want to operate from one remote control.
Note:
If you dont know the projectors ID, hold down the IDbutton and press the Homebutton to
temporarily display the projectors ID on the screen.
Parent topic: Projector Identification System for Multiple Projector Control
Setting the Remote Control ID The remote controls ID is set to 0by default so it can operate any compatible projector. If you want to set
the remote control to operate only a particular...

168
Note:
If you dont know the projectors ID, hold down the IDbutton and press the Homebutton to
temporarily display the projectors ID on the screen. If the batteries are left out of the remote control
for an extended period, the remote control ID returns to its default setting.
Parent topic: Projector Identification System for Multiple Projector Control
Tiling Images into One Image You can project the same image from up to nine projectors to create one large image using the Tiling
feature.
Note:Before...

169
2. Press the
Menubutton.
3. Select the Extendedmenu and press Enter.
4. Select Multi-Projection and pressEnter.
You see this screen:
5. Select Projector Grouping and pressEnter.
You see a screen like this: 

170
6. Press the up or down arrow buttons to highlight a projector and press
Enterto place a checkmark
next to each projector you want to use for tiling. Then select Setand press Enter.
7. Select Tilingand press Enter.
8. Select Tilingagain and press Enter.
9. Select Autoand press Esc.
10. Select Location Setup and pressEnter.
The projected images are positioned automatically.
11. When you see the message to assign projector IDs, select Yes.
When setup is complete, you see a screen like this:
Note: If...