Epson Projector L1200U User Manual
Have a look at the manual Epson Projector L1200U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
101 Related concepts Image Shape Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality. Correcting Image Shape with H/V Keystone Correcting Image Shape with Quick Corner Correcting Image Shape with Curved Surface Correcting Image Shape with Corner Wall Correcting Image Shape with Point Correction Parent topic:Using Basic Projector Features Correcting Image Shape with H/V Keystone You can use the projectors H/V Keystone setting to correct the shape of an image that is unevenly rectangular on the sides. Note:You cannot combine H/V Keystone correction with other image adjustment methods. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
102 Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menubutton. 3. Select the Settingsmenu and press Enter. 4. Select the Geometry Correctionsetting and press Enter. Note: You can also access the geometric adjustment screen by pressing the Geometrybutton on the remote control or the up arrow button on the control panel. 5. Select the H/V-Keystone setting and press Enter. Then press Enteragain. You see the H/V-Keystone adjustment screen:
103 6. Use the arrow buttons on the projector or the remote control to select between vertical and horizontal keystone correction and to adjust the image shape as necessary. V-Keystone V-Balance H-Keystone H-Balance
104 7. When you are finished, press Esc. After correction, your image is slightly smaller. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Quick Corner You can use the projectors Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menubutton.
105 3. Select the Settingsmenu and press Enter. 4. Select the Geometry Correction setting and pressEnter. 5. Select the Quick Corner setting and press Enter. Then press Enteragain. You see the Quick Corner adjustment screen: Note: To reset your adjustments, press and hold the Escbutton for at least 2 seconds to display a reset screen. Then select Yes.
106 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Curved Surface You can use the projectors Curved Surface setting to adjust the shape of an image projected on a curved surface. Note:For the best results, project from the front of the screen onto a surface with a uniform arc radius and with the lens in the home position. The image may not be evenly focused throughout even after performing the steps here. If you see a 4K Enhancement message, select Yesto disable the 4K Enhancement feature. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
107 Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menubutton. 3. Select the Settingsmenu and press Enter. 4. Select the Geometry Correction setting and pressEnter. 5. Select the Curved Surface setting and press Enter. Note: If you see a confirmation message, press Enter. You see this screen: 6. Select the Correct Shape setting and press Enter.
108 7. Use the arrow buttons on the projector or the remote control to select the area you want to adjust. Then press Enter. Note: To reset your adjustments, press and hold the Escbutton for at least 2 seconds to display a reset screen. Then select Yes. 8. Use the arrow buttons on the projector to adjust the image shape. Note: If the adjustment triangle turns gray, you cannot adjust the shape any further in that direction.
109 9. Press the Escbutton to return to the Curved Surface menu screen. 10. Repeat the previous three steps as necessary to adjust other image areas. If the image expands or contracts, continue with the next step to adjust the linearity. 11. Select one of the following from the Curved Surface menu screen: •Horizontal Linearity: Adjusts horizontal expansion or contraction. • Vertical Linearity: Adjusts vertical expansion or contraction. 12. Select a displayed line to use as a baseline and press Enter. The selected baseline flashes red and white. 13. Adjust the linearity by doing one of the following: • Press the left arrow button to contract the distance between the lines closest to the baseline. • Press the right arrow button to expand the distance between the lines closest to the baseline. 14. When you are finished, press the Menubutton. Note: If necessary, you can adjust the image tilt using the Quick Cornersetting, then fine-tune your adjustments using the Point Correctionsetting. Parent topic: Image Shape
110 Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Point Correction Correcting Image Shape with Corner Wall You can use the projectors Corner Wall setting to adjust the shape of an image projected on a surface with right angles, such as a rectangular pillar or the corner of a room. Note:For the best results, project from the front of the screen onto a right-angled surface and with the lens in the home position. The image may not be evenly focused throughout even after performing the steps here. If you see a 4K Enhancement message, select Yesto disable the 4K Enhancement feature. Corner Wall is not supported for the ELPLX01 lens. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menubutton.