Epson Projector EX7220 User Manual

3.
Pull theairfilter outofthe projector.
 Note:
Airfilters contain ABSresin andpolyurethane foam.Dispose ofused airfilters according to
 local
regulations.
 4.
Place thenew airfilter inthe projector asshown andpush gently untilitclicks intoplace.
 121   

5.
Close theairfilter cover.
 Parent
topic:AirFilter andVent Maintenance
 Projector
LampMaintenance
 The
projector keepstrackofthe number ofhours thelamp isused anddisplays thisinformation inthe
 projectors
menusystem.
 Replace
thelamp assoon aspossible whenthefollowing occurs:
 •
The projected imagegetsdarker orstarts todeteriorate
 •
Amessage appearswhenyouturn onthe projector tellingyoutoreplace thelamp
 •
The projectors lamplightisflashing orangeanditspower lightisflashing blue
 Replacing
theLamp...

3.
Use thescrewdriver includedwiththereplacement lamptoloosen thescrew securing thelamp
 cover.

Warning:
Ifthe lamp isbroken, glassfragments maybeloose inside thelamp chamber. Becareful
 removing
anybroken glasstoavoid injury. Ifthe projector isinstalled onthe ceiling, standtothe side
 of
the lamp cover andnotunderneath it;pieces ofglass could fallinto your eyes ormouth whenyou
 open
thelamp cover.
 4.
Slide thelamp cover outand liftitoff.
 123   

5.
Loosen thescrews securing thelamp tothe projector. Thescrews donot come allthe way out.
 6.
Grasp theraised section ofthe lamp andgently pullthelamp outofthe projector.
 Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal
 regulations
regardingdisposalorrecycling. Donot putinthe trash.
 124    

7.
Gently insertthenew lamp intotheprojector. Ifitdoes notfiteasily, makesureitis facing theright
 way.

Caution:
Donot touch anyglass onthe lamp assembly toavoid premature lampfailure.
 8.
Push inthe lamp firmly andtighten thescrews tosecure it.
 125   

9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Resetting
theLamp Timer
 Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp...

3.
Select theReset menuandpress Enter.
 4.
Select ResetLampHours andpress Enter.
 You
seeaprompt askingifyou want toreset thelamp hours.
 5.
Select Yesandpress Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Replacing
theLamp
 Replacing
theRemote ControlBatteries
 The
remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
 run
out.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries...

1.
Open thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands, washthemimmediately toavoid injury.
 3.
Insert thebatteries withthe+and –ends facing asshown.
 128   

4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlOperation
 Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector safely:...

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Using
theProjector HelpDisplays
 Solving
ImageorSound Problems
 Solving
Projector orRemote ControlOperation Problems
 Solving
Network Problems
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem, checkthefollowing:
 •
The...