Epson Projector Ex7200 User Manual

							Displaying and Adjusting the Image51
Adjusting the Position of the Image
If the image is too low on the screen, you can use the front adjustable 
foot to raise it. 
1. Press the foot release lever up and lift the front of the projector.
2. Once the image is positioned where you want it, release the lever 
to lock the foot in position.
3. If the image is tilted or you need to fine-tune the height of the 
image, you can turn the projector’s adjustable rear feet.
Raising the projector may cause the image shape to distort or 
“keystone,” but you can correct the shape as described below. 
Adjusting the Image Shape
You can maintain a rectangular image by placing the projector directly 
in front of the screen and keeping it level. This also produces the best 
picture quality. If the projector is tilted up or down (up to 30°), or 
placed at an angle, the shape may “keystone” and you may need to 
correct the image shape.
The EX5200 and EX7200 projectors include an 
Auto Keystone 
function that detects and corrects vertical keystone distortion. It takes 
about one second after the projector starts for the image to be 
corrected. 
						

							52Displaying and Adjusting the ImageIf your image is still distorted, or you are using the VS200 or EX3200 
projector, do one of the following:
■Press the appropriate keystone correction button on the 
projector’s control panel until the shape is evenly rectangular.
■Select the Keystone setting in the projector’s Settings menu (see 
page 73). Then use the arrow buttons on the remote control to 
adjust the shape of the image.
Keystone correction 
buttons
VS200/EX3200
EX5200/EX7200
Keystone correction 
buttons 
						

							Displaying and Adjusting the Image53
Focusing and Zooming the Image
Turn the focus ring on the projector to sharpen the image.
VS200/EX3200: to enlarge or reduce the image, press the 
Wide 
(enlarge) or 
Tele (reduce) button on the projector’s control panel. 
You can also use the 
Zoom setting in the projector’s Settings menu; 
see page 73 for instructions.
If the image still isn’t large enough, you may need to move the 
projector farther away from the screen. 
VS200
EX3200
EX5200/EX7200
Wide buttonTele button 
						

							54Displaying and Adjusting the ImageYou can also use the 
E-Zoom buttons on the remote control to zoom 
in on a portion of the image. See page 60 for instructions.
EX5200/EX7200: to enlarge or reduce the image, turn the zoom ring.
Selecting the Color Mode
The Color Mode adjusts the brightness, contrast, and color for various 
common viewing environments. Use this setting to quickly obtain a 
good picture.
Press the 
Color Mode button on the remote control to select an 
option. Press it until the option you want is projected in the upper 
right corner.
Select from one of these 
Color Mode options:
■Dynamic: Brightest mode; for video games or TV in a bright 
room
.
■Presentation: For color presentations in a bright room. 
■Theatre: For natural-toned movies in a darkened room. 
■Photo: For vivid, high-contrast still images in a bright room (only 
available when the source is set to 
Computer or USB).
■Sports: For vivid TV images in a bright room (only available for 
component video, S-Video, or composite video sources).
Color Mode 
button 
						

							Displaying and Adjusting the Image55
■sRGB: Matches the color palette of standard sRGB computer 
displays. 
■Blackboard: Projects accurate colors on a green chalkboard 
(adjusts the white point).
■Whiteboard: For computer presentations in a bright room with 
black-and white text and graphics.
Resizing Video Images
You can resize your images by changing the aspect (width to height) 
ratio (depending on your input signal).
Press the 
Aspect button on the remote control. Press the Aspect 
button repeatedly to cycle through the available options.
Select from one of these 
Aspect options:
VS200/EX3200/EX5200
■Normal (for images sent through the Computer (Component 
Video)
 port only): Displays images using the full projection area 
and maintains the aspect ratio of the image. Choose this setting to 
automatically resize the image and make the best use of the 
display area.
■Auto (HDMI images on EX5200 only): Automatically sets the 
aspect ratio according to the input signal. Choose this setting to 
project an HDMI image in the best aspect ratio.
■4:3: Displays images using the full projection area at an aspect 
ratio of 4:3.
■16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio 
images are elongated horizontally to fit.
note
You cannot change the 
aspect ratio when displaying 
from a computer using the 
USB 
TypeB port or from a 
USB device using the 
USB 
source on the EX5200/
EX7200.
Aspect 
button 
						

							56Displaying and Adjusting the ImageEX7200
■Normal: Displays images using the full projection area and 
maintains the aspect ratio of the image. Choose this setting to 
automatically resize the image and make the best use of the 
display area.
■Auto (HDMI images only): Automatically sets the aspect ratio 
according to the input signal. Choose this setting to project an 
HDMI image in the best aspect ratio.
■16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio 
images are elongated horizontally to fit.
■Full: Displays images using the full width of the projection area, 
but does not retain the aspect ratio. 4:3 ratio images are elongated 
horizontally.
■Zoom: Displays images using the full width of the projection area 
and maintains the aspect ratio of the image. The image may be 
cut off on the top and bottom depending on its aspect ratio.
■Native: Displays images as is (aspect ratio and resolution are 
maintained). Black bands may appear or images may be cut off, 
depending on the resolution. 
						

							57
3
Presenting With the Remote 
Control
The projector includes a number of tools to enhance your 
presentation. All of them can be accessed using the remote control, 
which lets you operate the projector from anywhere in the room—up 
to 19.7 feet (6 meters) away. 
This chapter covers:
■Using the remote control
■Controlling the picture and sound
■Operating your computer with the remote control
■Highlighting your presentation
■Presenting a slideshow from a USB device (EX5200/EX7200 
only) 
						

							58Presenting With the Remote Control
Using the Remote Control
Make sure batteries are installed as described on page 90. Follow these 
tips for using the remote control: 
■Point the remote control at the front or back of the projector, or 
at the screen.
■Stand within 19.7 feet (6 meters) of the projector.
■Aim the remote control within 30° to the side of, or 15° above or 
below, the remote control receivers on the projector.
Controlling the Picture and Sound
You can use the remote control to temporarily turn off the picture and 
sound, freeze the action, zoom in on the picture, and adjust the 
volume. 
Turning Off the Picture and Sound 
Press the A/V Mute button on the remote control or close the 
A/V Mute slide on the projector to turn off the image and sound, and 
darken your screen. This is useful if you want to temporarily re-direct 
your audience’s attention without the distraction of a bright screen.
note
If a button is pressed for 
longer than 30 seconds, the 
remote control stops 
operating to conserve battery 
power. When you release the 
button, normal operation 
resumes.
Using the remote control 
under bright fluorescent 
lamps or in direct sunlight 
may affect projector 
response.
A/V Mute button
VS200 
						

							Presenting With the Remote Control59
To turn the image and sound back on, press the button again, or open 
the 
A/V Mute slide.
You can create an image, such as a company logo or picture, to display 
on the screen whenever you press the 
A/V Mute button. (See page 79 
for more information.)
You can also set the 
Lens Cover Timer setting to automatically turn 
off the projector after 30 minutes to protect the projector if the 
A/V Mute slide is closed for a long time. See page 75 for instructions.
Stopping Action
Press the Freeze button on the remote control to stop the action in 
your video or computer image. The image freezes but the sound 
continues.
To restart the action, press the 
Freeze button again.
A/V Mute button
EX3200/EX5200/EX7200
note
The Freeze function pauses 
the image, not the sound. 
Because the source continues 
to transmit signals, it will 
not resume at the same 
point.Freeze button 
						

							60Presenting With the Remote Control
Zooming In on Your Image
You can zoom in on a portion of the image using the E-Zoom buttons 
on the remote control. 
1. Press the 
E-Zoom + button on the remote control. 
You see a crosshair indicating the center of the zoom-in area.
2. Use the arrow (menu navigation) buttons to position the 
crosshair.
3. Continue pressing the 
E-Zoom + button to enlarge the selected 
area up to 4 times.
4. While the image is enlarged, you can:
■Use the arrow buttons to move around the screen.
■Press the E-Zoom – button to zoom out. 
5. Press the 
ESC button to return the image to its original size.
Controlling the Volume
To change the volume on the projector, press the   or   button on 
the remote control. 
On the EX5200/EX7200 projector, you can also press the   or   
button on the projector’s control panel.
You can also adjust the volume using the projector’s menu system. 
Seepage74. 
note
You cannot use the 
Progressive feature (see 
page 71) while you are using 
E-Zoom.
note
To temporarily shut off the 
sound and picture, press the 
A/V Mute button or close 
the A/V Mute slide.
Volume 
buttons