Epson Projector EX5250 Pro User Manual
Have a look at the manual Epson Projector EX5250 Pro User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Display format Refresh rate (in Hz)Resolution (in pixels) Computer signals (analog RGB) VGA 60/72/75/85640 × 480 SVGA 60/72/75/85800 × 600 XGA 60/70/75/851024 × 768 WXGA 601280 × 768 60 1366 × 768 60/75 1280 × 800 WXGA+ 601440 × 900 SXGA 70/751152 × 864 60 1280 × 960 60 1280 × 1024 SXGA+ 601400 × 1050 Composite video TV (NTSC) 60720 × 480 TV (SECAM) 50720 × 576 TV (PAL) 50/60720 × 576 Component video SDTV (480i) 60720 × 480 SDTV (576i) 50720 × 576 SDTV (480p) 60720 × 480 SDTV (576p) 50720 × 576 HDTV (720p) 50/601280 × 720 HDTV (1080i) 50/601920 × 1080 HDMI input signals VGA 60640 × 480 SVGA 60800 × 600 191
Display format Refresh rate (in Hz)Resolution (in pixels) XGA 601024 × 768 WXGA 601280 × 800 60 1366 × 768 WXGA+ 601440 × 900 SXGA 601280 × 960 60 1280 × 1024 SXGA+ 601400 × 1050 SDTV (480i/480p) 60720 × 480 SDTV (576i/576p) 50720 × 576 HDTV (720p) 50/601280 × 720 HDTV (1080i) 50/601920 × 1080 HDTV (1080p) 24/30/50/601920 × 1080 EX5240/EX5250 Pro/EX7240 Pro/EX9200 Pro/VS340/VS345 Display format Refresh rate (in Hz)Resolution (in pixels) Computer signals (analog RGB) VGA 60/72/75/85640 × 480 SVGA 60/72/75/85800 × 600 XGA 60/70/75/851024 × 768 WXGA 601280 × 768 60 1366 × 768 60/75/85 1280 × 800 WXGA+ 60/75/851440 × 900 WXGA++ 601600 × 900 192
Display format Refresh rate (in Hz)Resolution (in pixels) SXGA 70/75/851152 × 864 60/75/85 1280 × 1024 60/75/85 1280 × 960 SXGA+ 60/751400 × 1050 WSXGA+ 1 60 1680 × 1050 UXGA 601600 × 1200 WUXGA 2 60 1920 × 1200 Composite video TV (NTSC) 60720 × 480 TV (SECAM) 50720 × 576 TV (PAL) 50/60720 × 576 Component video SDTV (480i) 60720 × 480 SDTV (576i) 50720 × 576 SDTV (480p) 60720 × 480 SDTV (576p) 50720 × 576 HDTV (720p) 50/601280 × 720 HDTV (1080i) 50/601920 × 1080 HDMI input signals VGA 60640 × 480 SVGA 60800 × 600 XGA 601024 × 768 WXGA 601280 × 800 60 1366 × 768 WXGA+ 601440 × 900 WXGA++ 601600 × 900 193
Display format Refresh rate (in Hz)Resolution (in pixels) SXGA 601280 × 960 60 1280 × 1024 SXGA+ 601400 × 1050 UXGA 601600 × 1200 WSXGA+ 3 60 1680 × 1050 WUXGA 2 60 1920 × 1200 SDTV (480i/480p) 60720 × 480 SDTV (576i/576p) 50720 × 576 HDTV (720p) 50/601280 × 720 HDTV (1080i) 50/601920 × 1080 HDTV (1080p) 24/30/50/601920 × 1080 MHL input signals (EX7240 Pro/EX9200 Pro) VGA 60640 × 480 SDTV (480i/480p) 60720 × 480 SDTV (576i/576p) 50720 × 576 HDTV (720p) 50/601280 × 720 HDTV (1080i) 50/601920 × 1080 HDTV (1080p) 24/301920 × 1080 1 Wide resolution only for EX7240 Pro/EX9200 Pro/VS345 2 EX9200 Pro only 3 EX7240 Pro/EX9200 Pro only Parent topic: Technical Specifications USB Display System Requirements Your computer system must meet the system requirements here to use the projectors USB Display software. 194
Requirement Windows Mac Operating system Windows XP Professional, Home OS X 10.5.8 (32-bit); OS X 10.6.x, Edition, and Tablet PC Edition (32-bit); 10.7.x, 10.8.x, 10.9.x, or 10.10.x (32- except for Service Pack 1 and 64-bit) Windows Vista Ultimate, Enterprise, Business, Home Premium, and Home Basic (32-bit) Windows 7 Ultimate, Enterprise, Professional, and Home Premium (32- and 64-bit); Home Basic and Starter (32- bit) Windows 8.x, Windows 8 Enterprise and Pro (32- and 64-bit) Windows 10 Home, Pro, and Enterprise (32- and 64-bit) USB version USB 1.1 and above (USB 2.0 recommended) CPU Mobile Pentium III 1.2 GHz or faster Power PC G4 1 GHz or faster (Core (1.6 GHz or faster recommended) Duo 1.83 GHz or faster recommended) Memory 256MB or more (512MB or more 512MB or more recommended) Hard disk space 20MB or more Display Resolution between 640 × 480 and Resolution between 640 × 480 and 1920 × 1200, 16-bit color or greater 1920 × 1200, 16-bit color or greater Parent topic: Technical Specifications 195
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions List of Safety Symbols (corresponding to IEC60950-1 A2) FCC Compliance Statement Open Source Software License Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this sitefor information on how to return your products for proper disposal. Parent topic: Notices Important Safety Information Caution:Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this Users Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Warning: The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. Caution: When you replace the lamp, never touch the new lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp. Parent topic: Notices 196
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoidstanding in front of the projector so the bright light does not shine into your eyes. • Do not place the projector on an unstable cart, stand, or table. • Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector more than 30° forward or back. • If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using mounting hardware designed for use with this projector. • When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants. This may cause the projector case to crack and the projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and could damage the projector. • Do not use the projector near water, sources of heat, high-voltage electrical wires, or sources of magnetic fields. • Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company. • Place the projector near a wall outlet where the plug can be easily unplugged. • Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not insert the plug into a dusty outlet. Insert the plug firmly into the outlet. Do not pull the power cord when disconnecting the plug; always be sure to hold the plug when disconnecting it. Do not overload wall outlets, extension cords, or power strips. Failure to comply with these precautions could result in fire or electric shock. • Do not place the projector where the cord can be walked on. This may result in fraying or damage to the plug. • Unplug the projector from the wall outlet and allow to cool before cleaning. Use a dry cloth (or, for stubborn dirt or stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid or aerosol cleaners, any sprays containing flammable gas, or solvents such as alcohol, paint thinner, or benzine. • Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers. Do not cover the projector with a blanket, curtain, or tablecloth. If you are setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and the projector. • Do not operate the projector in a closed-in cabinet unless proper ventilation is provided. 197
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation. • You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. Do not use canned air, or the gases may leave a residue. • Do not store the projector outdoors for an extended length of time. • Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. • Never open any covers on the projector except as specifically explained in this manual. Never attempt to disassemble or modify the projector. Refer all repairs to qualified service personnel. • Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: if it does not operate normally when you follow the operating instructions, or exhibits a distinct change in performance; if smoke, strange odors, or strange noises come from the projector; if the power cord or plug is damaged or frayed; if liquid or foreign objects get inside the projector, or if it has been exposed to rain or water; if it has been dropped or the housing has been damaged. • Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock. • Unplug the projector when it will not be used for extended periods. • Do not use the projector where it may be exposed to rain, water, or excessive humidity. • Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases, excessive dust, vibration, or shock. • Do not use the projector where flammable or explosive gases may be present. • Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle. • If you use the projector in a country other than where you purchased it, use the correct power cord for that country. • Do not stand on the projector or place heavy objects on it. • Do not use the projector outside of the required temperature range of 41 to 95 °F (5 to 35 °C) at an altitude of 7500 feet (2286 m) or less, or 41 to 86 °F (5 to 30 °C) at a higher altitude. Doing so may cause an unstable display and could lead to projector damage. Do not use or store the projector where it may be exposed to sudden changes in temperature. 198
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress. Do not bring your face close to the projector while it is in use. • Before you move the projector, make sure its power is turned off, the plug is disconnected from the outlet, and all cables are disconnected. • Never try to remove the lamp immediately after use because it will be extremely hot. Before removing the lamp, turn off the power and wait at least an hour to allow the lamp to cool completely. • Do not disassemble the lamp or subject it to impacts. • Do not place the source of an open flame, such as a lit candle, on or near the projector. • Do not block the lens during projection using a book or any object other than the lens cover. This could damage the projector or cause a fire. • Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or pull it excessively. Keep the power cord away from hot electrical appliances. • If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with your eyes or mouth. If you do inhale gases or gases come in contact with your eyes or mouth, seek medical advice immediately. • If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from falling into your eyes or mouth when you open the lamp cover. If pieces of glass do get into your eyes or mouth, seek medical advice immediately. • Always lower the volume before turning off the projector. Turning on the projector with the volume too high can damage your ears. WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.(This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.) Restriction of Use Parent topic: Notices Restriction of Use When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including fail- safes and redundancies into your design to maintain safety and total system reliability. 199
Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care, please make your own judgment on this products suitability after a full evaluation. Parent topic: Important Safety Instructions List of Safety Symbols (corresponding to IEC60950-1 A2) The following table lists the meaning of the safety symbols labeled on the equipment. No. Symbol Approved Standards Description 1 IEC60417ON (power) No.5007 To indicate connection to the mains. 2 IEC60417OFF (power) No.5008 To indicate disconnection from the mains. 3 IEC60417Stand-by No.5009 To identify the switch or switch position by means of which part of the equipment is switched on in order to bring it into the stand-by condition. 4 ISO7000Caution No.0434B, To identify general caution when using the product. IEC3864-B3.1 5 IEC60417Caution, hot surface No.5041 To indicate that the marked item can be hot and should not be touched without taking care. 200