Epson Projector EX5240 User Manual

							If your image colors appear incorrect, you may need to change the
Input Signalsetting in the projectors
Signal menu.
Parent topic: Connecting to Video Sources
Related references
Optional Equipment and Replacement Parts
Input Signal Settings - Signal Menu
Related tasks
Connecting to a Video Source for Sound
Connecting to an S-Video Video Source If your video source has an S-Video port, you can connect it to the projector using an optional S-Video
cable.
1. Connect the S-Video cable to your video sources S-Video output port.
2. Connect the other end to the projectors S-Videoport.
EX3240/EX5240/EX5250 Pro/EX7240 Pro/VS240/VS340/VS345
Parent topic: Connecting to Video Sources
Related tasks
Connecting to a Video Source for Sound
Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional
RCA-style video or A/V cable.
1. Connect the cable with the yellow connector to your video sources yellow video output port.
41  
						

							2. Connect the other end to the projectors
Videoport.
EX3240/EX5240/EX5250 Pro/EX7240 Pro/VS240/VS340/VS345
EX9200 Pro
Parent topic: Connecting to Video Sources
Related tasks
Connecting to a Video Source for Sound
Connecting to a Video Source for Sound You can play sound through the projectors speaker system if your video source has audio output ports.
Connect the projector to the video source using an RCA audio cable.
1. Connect the audio cable to your video sources audio-out ports.
42   
						

							2. Connect the other end of the cable to the projectors
Audioport or ports.
EX3240/EX5240/EX5250 Pro/EX7240 Pro/VS240/VS340/VS345
EX9200 Pro
Parent topic: Connecting to Video Sources
Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector.
USB Device Projection
Connecting a USB Device or Camera to the Projector
Selecting the Connected USB Source
Disconnecting a USB Device or Camera From the Projector
Parent topic:Projector Connections
43   
						

							USB Device Projection
You can project images and other content without using a computer or video device by connecting any of
these devices to your projector:
• USB flash drive
• Digital camera or smartphone
• USB hard drive
• Multimedia storage viewer
• USB memory card reader
Note:Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,
and must be USB Mass Storage Class-compliant.
Note: USB hard drives must meet these requirements:
• USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)
• Formatted in FAT or FAT32
• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)
• Does not have multiple partitions
You can project slide shows from image files on a connected USB device or memory card reader.
Parent topic: Connecting to External USB Devices
Related topics
Projecting a PC Free Presentation
Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projectors USB-Aport and use it to project images
and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
44 
						

							2. Connect the USB cable (or USB flash drive or USB memory card reader) to the projectors
USB-A
port.
EX3240/EX5240/EX5250 Pro/EX7240 Pro/VS240/VS340/VS345
EX9200 Pro
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related topics
Projecting a PC Free Presentation
Selecting the Connected USB Source You can switch the projectors display to the source you connected to the USB-Aport.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USBbutton on the remote control.
45   
						

							3. Press the button again to cycle through other USB sources, if available.
Parent topic:
Connecting to External USB Devices
Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device or camera from the projector.
Parent topic:Connecting to External USB Devices
Connecting to a Document Camera You can connect a document camera to your projector to project images viewed by the camera.
Depending on your Epson document camera model, do one of the following to connect the document
camera to your projector:
• For the Epson DC-06 document camera, locate the USB cable that came with the camera andconnect it to the projectors USB-Aport and to the document cameras USB Type B port.
• For the Epson DC-11 document camera, connect it to the projectors ComputerorVideo port and to
the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-12 document camera, connect it to the projectors HDMI,Computer, or Videoport
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-20 document camera, connect it to the projectors HDMI,Computer, or Videoport
and to the corresponding port on the document camera. See the document camera manual for details.
EX3240/EX5240/EX5250 Pro/EX7240 Pro/VS240/VS340/VS345
46  
						

							EX9200 Pro
Note:
For additional features supported by software, connect your document camera to your computer
instead of the projector. See the document camera manual for details.
Parent topic: Projector Connections
Related references
Optional Equipment and Replacement Parts
Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector.
Caution:Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
47  
						

							1. Remove the battery cover.
2. Insert the batteries with the
+and –ends facing as shown.
48   
						

							3. Replace the battery cover and press it down until it clicks into place.
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Setting Up the Projector
Related references
Remote Control Specifications
Opening the Lens Cover Note:Your product may look different from the illustrations in this guide, but the instructions are the
same.
49  
						

							To open the projectors lens cover, slide the
A/V Muteslide lever until it clicks into the open position.
Parent topic: Setting Up the Projector
50