Epson Projector EX5230 User Manual

							

The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandtheStatus lightflashes blueasthe projector warmsup.Once theprojector
 is
warmed up,theStatus lightstops flashing andturns blue.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Verify thelens cover isopen allthe way.
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media, andpress theplay button (ifnecessary).
 •
Press theSource Searchbuttononthe projector orremote controltodetect thevideo source.
 •
Press thebutton forthe video source onthe remote control.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Related
tasks
 Selecting
anImage Source
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 Note:
Yourproduct maylookdifferent fromtheillustrations inthis guide, buttheinstructions arethe
 same.

1.
Press thepower button onthe projector orthe remote control.
 61 
						

							

The
projector displaysashutdown confirmation screen.
 2.
Press thepower button again.(Toleave iton, press anyother button.)
 The
projector beepstwice,thelamp turns off,and theStatus lightturns off.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 Caution:
Donot turn theprojector onimmediately afterturning itoff. Turning theprojector onand off
 frequently
mayshorten thelifeofthe lamp.
 3.
Totransport orstore theprojector, makesuretheStatus lightisoff, then unplug thepower cord.
 62  
						

							

Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen theStatus
 light
ison orflashing.
 4.
Close theprojectors lenscover.
 Parent
topic:UsingBasicProjector Features
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 63  
						

							

3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 Note:
Yourproduct maylookdifferent fromtheillustrations inthis guide, buttheinstructions arethe
 same.

1.
Turn onthe projector anddisplay animage.
 64 
						

							

2.
Toadjust thefront foot,pulluponthe foot release leverandliftthe front ofthe projector.
 The
footextends fromtheprojector.
 3.
Release thelever tolock thefoot.
 4.
Ifthe image istilted, rotate therear feettoadjust theirheight.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 65   
						

							

Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display quality.
 When
youturn onautomatic keystonecorrection inyour projectors Settingsmenu,yourprojector
 automatically
correctsverticalkeystone effectswhenyoureposition theprojector.
 Correcting
ImageShape withtheHorizontal KeystoneSlider
 Correcting
ImageShape withtheKeystone Buttons
 Correcting
ImageShape withQuick Corner
 Parent
topic:UsingBasicProjector Features
 Correcting
ImageShape withtheHorizontal KeystoneSlider
 You
canusetheprojectors horizontalkeystoneslidertocorrect theshape ofan image thatisunevenly
 rectangular
horizontally, suchaswhen theprojector isplaced tothe side ofthe projection area.
 Note:
Yourproduct maylookdifferent fromtheillustrations inthis guide, buttheinstructions arethe
 same.

1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Adjust theslider untiltheimage isevenly rectangular.
 After
correction, yourimage isslightly smaller.
 Parent
topic:Image Shape
 66  
						

							

Related
references
 Projector
FeatureSettings -Settings Menu
 Correcting
ImageShape withtheKeystone Buttons
 You
canusetheprojectors keystonecorrection buttonstocorrect theshape ofan image thatis
 unevenly
rectangular onthe sides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press oneofthese keystone buttonsonthe control paneltodisplay theKeystone adjustment
 screen.

3.
Press akeystone buttononthe projectors controlpaneltoadjust theimage shape.
 67   
						

							

Note:
Thehorizontal keystoneadjustment buttonsarelabeled WideandTele onthe
 EX3220/VS230.

After
correction, yourimage isslightly smaller.
 Note:
Ifthe projector isinstalled outofreach, youcanalso correct theimage shape withtheremote
 control
usingtheKeystone settingsinthe projector menus.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Correcting
ImageShape withQuick Corner
 You
canusetheprojectors QuickCorner settingtocorrect theshape andsize ofan image thatis
 unevenly
rectangular onallsides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press theMenu button.
 68  
						

							

3.
Select theSettings menuandpress Enter.
 4.
Select theKeystone settingandpress Enter.
 5.
Select theQuick Corner settingandpress Enter.Then press Enter again.
 You
seetheQuick Corner adjustment screen:
 6.
Use thearrow buttons onthe projector orthe remote controltoselect thecorner ofthe image you
 want
toadjust. Thenpress Enter.
 69 
						

							

7.
Press thearrow buttons toadjust theimage shape asnecessary.
 8.
When youarefinished, pressEsc.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Resizing
theImage
 You
canresize theimage usingtheprojectors zoomringorthe Wide andTele buttons, depending on
 the
projector model.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 •
Ifthe projector includesazoom ring,rotate itto enlarge orreduce theimage size.
 •
Ifthe projector includesWideandTele buttons, presstheWide button onthe projectors controlpanel
 to
enlarge theimage size.Press theTele button toreduce theimage size.
 1
 EX5220/EX5230/EX6220/EX7220/VS330/VS335W

2
 EX3220/VS230

Parent
topic:UsingBasicProjector Features
 70