Epson Projector Ex5210 User Manual

Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector safely:
 •
Close thelens cover toprotect thelens.
 •
Remove anyequipment connectedtothe projector.
 •
Use acarrying casetohand-carry theprojector.
 •
When transporting theprojector along distance oras checked luggage, placeitin acarrying case.
 Then
packthecase inafirm boxwith cushioning arounditand mark thebox Fragile.
 •
When shipping theprojector forrepairs,...

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Using
theProjector HelpDisplays
 Solving
ImageorSound Problems
 Solving
Projector orRemote ControlOperation Problems
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem, checkthefollowing:
 •
The lights onthe projector...

1
 Power
light
 2
 Lamp
light
 3
 Temperature
light
 Power
light
 Lamp
light
 Temperature
 Status
andsolution
 light

Green
 Off
 Off
 Normal
operation.
 Flashing
green
 Off
 Off
 Warming
up.Wait foranimage toappear.
 Orange
 Off
 Off
 Standby
orsleep mode.
 Flashing
orange
 Off
 Off
 Preparing
formonitoring orshutting down.(When
 the
light remains orange,youcanunplug the
 projector.)

103  

Power
light
 Lamp
light
 Temperature
 Status
andsolution
 light

Flashing
red
 Off
 Flashing
orange
 Projector
istoo hot.
 •
Make surethatthevents andairfilter arenot
 clogged
withdust orobstructed bynearby
 objects.

•
Make suretheenvironmental temperatureisnot
 too
hot.
 •
Ifoverheating continues,cleanorreplace theair
 filter.

Red
 Off
 Red
 Projector
hasoverheated andturned off.Leave it
 turned
offtocool down forfive minutes.
 •
Make surethatthevents andairfilter arenot
 clogged
withdust...

Power
light
 Lamp
light
 Temperature
 Status
andsolution
 light

Red
orflashing
 Flashing
red
 Flashing
red
 Internal
projector error.Turntheprojector off,
 red
 unplug
it,and contact Epsonforhelp.
 Note:
Ifthe lights display apattern notlisted inthe table above, turntheprojector off,unplug it,and
 contact
Epsonforhelp.
 Parent
topic:Solving Problems
 Related
references
 Projector
SetupSettings -Extended Menu
 Where
toGet Help
 Related
tasks
 Cleaning
theAirFilter andVents
 Replacing
theAirFilter...

Solutions
WhenNoImage Appears
 Solutions
WhenImage isIncorrect UsingtheUSB Display Function
 Solutions
WhenNo Signal Message Appears
 Solutions
WhenNot Supported Message Appears
 Solutions
WhenOnlyaPartial ImageAppears
 Solutions
WhentheImage isNot Rectangular
 Solutions
WhentheImage Contains NoiseorStatic
 Solutions
WhentheImage isFuzzy orBlurry
 Solutions
WhentheImage Brightness orColors areIncorrect
 Solutions
WhenThereisNo Sound orLow Volume
 Parent
topic:Solving Problems
 Solutions
WhenNoImage...

Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Unlocking
theProjector s Buttons
 Solutions
WhenImage isIncorrect UsingtheUSB Display Function
 If
no image appears orifthe image appears incorrectly usingtheUSB Display function, trythe following
 solutions:

•
Press theUSB button onthe remote control.
 •
Make suretheUSB Type Bsetting inthe Extended menuisset toUSB Display ,if available.
 •
With MacOSX,select theUSB Display iconinthe Dock orfrom...

Displaying
FromaPC Laptop
 If
you seetheNo Signal message whenyoudisplay fromaPC laptop, youneed toset upthe laptop to
 display
onanexternal monitor.
 1.
Hold down thelaptops Fnkey and press thekey labelled withamonitor iconorCRT/LCD .(See
 your
laptop manual fordetails.) Waitafew seconds foranimage toappear.
 2.
Todisplay onboth thelaptops monitorandtheprojector, trypressing thesame keysagain.
 3.
Ifthe same image isnot displayed bythe laptop andprojector, checktheWindows Displayutilityto
 make...

Solutions
WhenOnlyaPartial ImageAppears
 If
only apartial computer imageappears, trythe following solutions:
 •
Press theAuto button onthe remote controltooptimize theimage signal.
 •
Try adjusting theimage position usingthePosition menusetting.
 •
Press theAspect buttononthe remote controltoselect adifferent imageaspect ratio.
 •
Ifyou zoomed intoorout ofthe image usingtheE-Zoom buttons,presstheEsc button toreturn toa
 full
display.
 •
Check yourcomputer displaysettings todisable dualdisplay andsetthe...

Solutions
WhentheImage Contains NoiseorStatic
 If
the projected imageseems tocontain electronic interference (noise)orstatic, trythe following
 solutions:

•
Check thecables connecting yourcomputer orvideo source tothe projector. Theyshould be:
 •
Separated fromthepower cordtoprevent interference
 •
Securely connected atboth ends
 •
Not connected toan extension cable
 •
Check thesettings onthe projectors Signalmenutomake suretheymatch thevideo source. If
 available
foryour video source,...