Epson Projector Ex5200 UserManual
Have a look at the manual Epson Projector Ex5200 UserManual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Technical Specifications111 Compatible Video Formats These projectors support the high definition video and computer display formats listed here. To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector. Some images are automatically resized using Epson’s SizeWize ™ technology to display in the projector’s native format. The frequencies of some computers may not allow images to display correctly; see your computer’s documentation for details. VS200/EX3200 Computer, component video, composite video, and S-Video ModeRefresh rate (Hz) Resolution VGA EGA 85 640 × 350 VGA—60 VESA—72 VESA—75 VESA—8560 72 75 85640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—8556 60 72 75 85800 × 600* 800 × 600* 800 × 600* 800 × 600* 800 × 600* XGA—60 XGA—70 XGA—75 XGA—8560 70 75 851024 × 768 1024 × 768 1024 × 768 1024 × 768 SXGA1—70 SXGA1—7570 751152 × 864 1152 × 864 WXGA—60 WXGA—7560 751280 × 800 1280 × 800 SXGA2—60 60 1280 × 960 SXGA3—60 60 1280 × 1024 WXGA1—60 WXGA2—6060 601280 × 768 1360 × 768 WXGA+60 60 1440 × 900 SXGA+60 60 1400 × 1050
112Technical Specifications * Native resolution EX5200 iMAC VGA iMAC SVGA iMAC XGA MAC13 MAC16 MAC19 MAC19-60 MAC21117 95 75 67 75 75 60 75640 × 480 800 × 600* 1024 × 768 640 × 480 832 × 624 1024 × 768 1024 × 768 1152 × 870 NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM60 60 50 50 60 60 50720 × 480 720 × 480 720 × 576 720 × 576 720 × 576 720 × 576 720 × 576 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i)60 50 60 50 60/50 60/50720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 Computer, component video, composite video, and S-Video ModeRefresh rate (Hz) Resolution VGA EGA 85 640 × 350 VGA—60 VESA—72 VESA—75 VESA—8560 72 75 85640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—8556 60 72 75 85800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 Computer, component video, composite video, and S-Video (continued) ModeRefresh rate (Hz) Resolution
Technical Specifications113 * Native resolutionXGA—60 XGA—70 XGA—75 XGA—8560 70 75 851024 × 768* 1024 × 768* 1024 × 768* 1024 × 768* SXGA1—70 SXGA1—7570 751152 × 864 1152 × 864 WXGA—60 WXGA—7560 751280 × 800 1280 × 800 SXGA2—60 60 1280 × 960 SXGA3—60 60 1280 × 1024 WXGA1—60 WXGA2—6060 601280 × 768 1360 × 768 WXGA+60 60 1440 × 900 SXGA+60 60 1400 × 1050 iMAC VGA iMAC SVGA iMAC XGA MAC13 MAC16 MAC19 MAC19-60 MAC21117 95 75 67 75 75 60 75640 × 480 800 × 600 1024 × 768* 640 × 480 832 × 624 1024 × 768* 1024 × 768* 1152 × 870 NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM60 60 50 50 60 60 50720 × 480 720 × 480 720 × 576 720 × 576 720 × 576 720 × 576 720 × 576 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i)60 50 60 50 60/50 60/50720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 Computer, component video, composite video, and S-Video (continued) ModeRefresh rate (Hz) Resolution
114Technical Specifications * Native resolution EX7200 HDMI signals ModeRefresh rate (Hz) Resolution VGA 60 640 × 480 SVGA 60 800 × 600 XGA 60 1024 × 768* WXGA 60 1280 × 800 SXGA SXGA60 601280 × 960 1280 × 1024 SXGA+ 60 1400 × 1050 UXGA 60 1600 × 1200 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i) HDTV (1080p)60 50 60 50 60/50 60/50 60/50720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 1920 × 1080 Computer, component video, composite video, and S-Video ModeRefresh rate (Hz) Resolution VGA EGA 85 640 × 350 VGA—60 VESA—72 VESA—75 VESA—8560 72 75 85640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—8556 60 72 75 85800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 XGA—60 XGA—70 XGA—75 XGA—8560 70 75 851024 × 768 1024 × 768 1024 × 768 1024 × 768
Technical Specifications115 SXGA1—70 SXGA1—75 SXGA1—85 SXGA1—10070 75 85 1001152 × 864 1152 × 864 1152 × 864 1152 × 864 WXGA—60 WXGA—75 WXGA—8560 75 851280 × 800* 1280 × 800* 1280 × 800* SXGA2—60 SXGA2—75 SXGA2—8560 75 851280 × 960 1280 × 960 1280 × 960 SXGA3—60 SXGA3—75 SXGA3—8560 75 851280 × 1024 1280 × 1024 1280 × 1024 WXGA1—60 WXGA2—6060 601280 × 768 1360 × 768 WXGA+60 WXGA+75 WXGA+8560 75 851440 × 900 1440 × 900 1440 × 900 SXGA+60 SXGA+75 SXGA+8560 75 851400 × 1050 1400 × 1050 1400 ×1050 UXGA—60 60 1600 × 1200 WSXGA+—60** 60 1680 × 1050 iMAC VGA iMAC SVGA iMAC XGA MAC13 MAC16 MAC19 MAC19-60 MAC21117 95 75 67 75 75 60 75640 × 480 800 × 600 1024 × 768 640 × 480 832 × 624 1024 × 768 1024 × 768 1152 × 870 NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM60 60 50 50 60 60 50720 × 480 720 × 480 720 × 576 720 × 576 720 × 576 720 × 576 720 × 576 Computer, component video, composite video, and S-Video (continued) ModeRefresh rate (Hz) Resolution
116Technical Specifications * Native Resolution ** Available only when you select Wide as the Resolution setting * Native ResolutionSDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i)60 50 60 50 60/50 60/50720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 HDMI signals ModeRefresh rate (Hz) Resolution VGA 60 640 × 480 SVGA 60 800 × 600 XGA 60 1024 × 768 WXGA 60 1280 × 800* SXGA SXGA60 601280 × 960 1280 × 1024 SXGA+ 60 1400 × 1050 UXGA 60 1600 × 1200 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i) HDTV (1080p)60 50 60 50 60/50 60/50 60/50720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 1920 × 1080 Computer, component video, composite video, and S-Video (continued) ModeRefresh rate (Hz) Resolution
117 B Notices This appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■Do not look into the lens when the projector is on. The bright light can damage your eyes. ■Do not place the projector on an unstable cart, stand, or table. ■Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector forward or back at a greater angle than that specified for keystone correction (see page 109). ■If the projector is mounted on a ceiling, it should be installed by qualified technicians using mounting hardware designed for use with this projector. ■If you use a ceiling mount and apply adhesives to the mount to prevent the screws from loosening, or if you use lubricants or oils on the projector, the projector case may crack and the projector may fall from its ceiling mount. This could cause serious injury to anyone under the mount and could damage the projector. When installing or adjusting a ceiling mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants. ■Do not stand on the projector or place heavy objects on it. ■Do not use the projector where it may be exposed to rain, water, or excessive humidity. ■Unplug the projector from the wall outlet before cleaning. Use a dry cloth (or, for stubborn dirt or stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid or aerosol cleaners. ■Never spill liquid of any kind into the projector. ■Do not use the projector where it may be exposed to excessive dust or smoke.
118Notices ■Never push objects of any kind through the cabinet slots. ■Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle. ■Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers, which could block vents underneath your projector. If you are setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and the air exhaust vent. ■Do not operate the projector in a closed-in cabinet unless proper ventilation is provided. ■If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation. ■You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. ■Do not store the projector outdoors for an extended length of time. ■Do not use the projector outside the required temperature range of 41 to 95 °F (5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage. ■Do not store the projector outside the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. ■Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock. ■Unplug the projector when it will not be used for extended periods. ■Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: If it does not operate normally when you follow the operating instructions, or exhibits a distinct change in performance; If smoke, strange odors, or strange noises come from the projector; If the power cord or plug is damaged or frayed; If liquid or foreign objects get inside the projector, or if it has been exposed to rain or water; If it has been dropped or the housing has been damaged. ■Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. ■Never open any covers on the projector except as specifically explained in this User’s Guide. Never attempt to disassemble or modify the projector. Refer all repairs to qualified service personnel.
Notices119 ■Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company. ■If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■Do not overload wall outlets, extension cords, or power strips. Do not insert the plug into a dusty outlet. This can cause fire or electric shock. ■Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not insert the plug into an outlet with dust present. Insert the plug firmly into the outlet. Do not pull the power cord when disconnecting the plug; always be sure to hold the plug when disconnecting it. Failure to comply with these precautions could result in fire or electric shock. ■Do not place the projector where the cord can be walked on. ■The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. ■Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress. ■Before you move the projector, make sure its power is turned off, the plug is disconnected from the outlet, and all cables are disconnected. ■Never try to remove the lamp immediately after use because it will be extremely hot. Before removing the lamp, turn off the power and wait at least an hour to allow the lamp to cool completely. ■Do not place the source of an open flame, such as a lit candle, on or near the projector. ■Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or pull it excessively. Keep the power cord away from hot electrical appliances. ■If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with the eyes or mouth. ■If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from falling into your eyes when you open the lamp cover. WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code §25249.5 and following.)
120Notices FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■Reorient or relocate the receiving antenna. ■Increase the separation between the equipment and receiver. ■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■Consult the dealer or an experienced radio/TV technician for help. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.