Epson Projector Ex31 User Manual

Setting Up the Projector31
When you’ve finished making connections, see page 40 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image.
Connecting to Video Equipment 
You can connect several video sources to the projector at the same 
time. Before starting, look at your video equipment to determine its 
available video output connections: 
■EX51/EX71 only: If your video player has an HDMI connector, 
see “Connecting an HDMI Video Source...

32Setting Up the Projector
Connecting an HDMI Video Source (EX51/EX71 
only)
For the best image and sound quality, connect your video equipment 
to the HDMI (High-Definition Multimedia Interface) port, if 
possible.
Connect an HDMI cable to the HDMI connector on your player and 
the 
HDMI connector on the projector.
When you’ve finished making connections, see page 40 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image.
note
If an HDMI cable...

Setting Up the Projector33
Connecting a Composite Video Source
1. If your video cable has an RCA connector, connect it to the 
yellow video output connector on your player and the yellow 
Video port on the projector.
2. If you want to play sound through the projector, see page 37 for 
instructions on connecting an audio cable.
When you’ve finished making connections, see page 40 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image. 
note
If...

34Setting Up the Projector
Connecting an S-Video Source
1. Connect the S-Video cable to the S-Video connector on your 
player and the 
S-Video port on the projector.
2. If you want to play sound through the projector, see page 37 for 
instructions on connecting an audio cable.
When you’ve finished making connections, see page 40 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image. 
note
If the S-Video cable was not 
provided with your video...

Setting Up the Projector35
Connecting a Component Video Source
If your video equipment has component video connectors (three 
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a 
component-to-VGA video cable from Epson (see page 16) or an 
electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the 
Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.
2. Connect the other end of the cable (HD15 male) to the 
Computer (Component Video) port on your projector using an...

36Setting Up the ProjectorWhen you’ve finished making connections, see page 40 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image.
Connecting an RGB Video Source
You can connect to an RGB video source using the VGA computer 
cable provided with the projector.
1. Connect the cable to the RGB video port on your player and the 
Computer (Component Video) port on the projector.
2. You may need to change the 
Input Signal setting in the...

Setting Up the Projector37
When you’ve finished making connections, see page 40 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image.
Playing Sound Through the Projector
You can play sound through the projector’s speaker system.
1. Locate the appropriate cable and connect it to the 
Audio jacks on 
the projector.
2. Connect the other end of the cable to the audio output 
connector(s) on your computer or video equipment. 
EX31
Audio jack...

38Setting Up the Projector
Connecting External Speakers (EX31 Only)
You can output sound from the projector to external speakers with a 
built-in amplifier. 
1. Locate the appropriate cable to connect your speakers.
Depending on your speakers, you may be able to use a standard 
audio cable with a stereo mini-jack connector on one end and pin 
jacks on the other end. For some speakers, you may need a special 
cable or adapter. 
2. Connect the stereo mini-jack end of the audio cable to the 
Audio 
Out...

Setting Up the Projector39
Connecting a Digital Camera or Other 
USB Device (EX51/EX71 Only)
You can connect your digital camera, USB thumb (flash memory) 
drive, USB hard drive, or multimedia storage viewer, such as the 
Epson P-7000. Then you can use the projector’s Slideshow function 
to display JPEG images or a presentation. See page 59 for details.
Use the USB cable specified for your device. 
1. Follow the instructions beginning on page 40 to turn on the 
projector.
2. Connect the USB drive or the...

40Setting Up the ProjectorIf you are connected to another image source, press the 
USB 
button on the remote control to go to the Slideshow program.
5. See page 59 for instructions on controlling the slideshow.
6. When you’re finished, press 
Esc and select Exit to exit the 
Slideshow before turning off or removing the USB device.
Be sure to turn off your USB device (if necessary) before you remove 
the device or cable from the projector. Failure to do so may damage 
the device and/or the projector....