Epson Projector Emp X5 User Manual

1
Users Guide 

2
Notations Used in This GuidefSafety Indications
So that you can use the projector safely and correctly, symbols are applied in the documentation and on the projector to indicate possible harm to the user or 
to others and the risk of damage to property. 
The indications and their meaning are as follows. Make sure you understand them properly before reading the guide. 
fGeneral Information Indications
 Wa r nin g
Indicates the possibility of death or serious injury if this symbol is ignored or if...

3
ContentsProjector Features ......................................................................................4
Part Names and Functions ........................................................................5
Front/Top.............................................................................................................. 5
Rear (EMP-83/822 Only)...................................................................................... 6
Rear (EMP-X5/S5 Only)...

4
Projector Features
f
The A/V mute slide makes it easy to project and store
You can stop and resume projection 
easily by opening and closing the A/V 
mute slide which makes giving clear 
presentations easier. 
f
A single foot design means you do not have to make any difficult 
levelling adjustments
You can easily make height 
adjustments with one hand.
 sQuick Start Guidef
Password Protect to restrict and manage users
By setting a password you can restrict who can use the projector. 
s
p.18
f
Operation...

5
Part Names and FunctionsFront/Top
Name
Function
A
Control panel
sp.8
B
Lamp cover
Open this cover when replacing the projectors 
lamp. sp.53
C
Air exhaust vent
 Caution
Do not place objects that may become warped 
or otherwise affected by heat near the air 
exhaust vent and do not put your face or 
hands near the air exhaust vent while 
projection is in progress.
F C AK
B
J
GEDH I
D
Front adjustable 
feet
Extend and adjust the position of the projected 
image when the projector is placed on a 
surface...

Part Names and Functions
6
Rear (EMP-83/822 Only)
Name
Function
A
Remote receiver
Receives signals from the remote control. 
sQuick Start Guide
B
Speaker
C
Monitor Out port
Outputs the image signal from the computer 
connected to the Computer1 input port to an 
external monitor. This is not available for 
component video
g signals or other signals 
being input to any port other than the 
Computer1 input port.sp.61
Audio Out port
Outputs the sound of the image currently being 
projected to external...

Part Names and Functions
7
Rear (EMP-X5/S5 Only)
* Limited to computers with the following operating systems installed.
Windows 98/98SE/2000/Me/XP Home Edition/XP Professional
Macintosh: OS 8.6 to 9.2/10.1 to 10.3
Name
Function
A
Remote receiver
Receives signals from the remote control. 
sQuick Start Guide
B
Speaker
C
Power inlet
Connects to the power cable. 
sQuick Start Guide
D
Monitor Out port
Outputs the image signal from the computer 
connected to the Computer input port to an 
external monitor....

Part Names and Functions
8
Control PanelfEMP-83/822/X5
fEMP-S5
Buttons without numbers operate in the same way as in the figure above. 
See the numbers in the table for the figure above.
H
CFE D A
BG IJ
Name
Function
A
[Power] button
Turns the projector power on or off. 
sQuick Start Guide
B
Status indicators
The color of the indicators and whether they 
are flashing or lit indicates the status of the 
projector. sp.38
C
[Source Search] 
button
Changes to the next input source that is 
connected to the...

Part Names and Functions
9
I
[Menu] button
Displays and closes the configuration 
menu.sp.23
J
[Wide] [Tele] 
buttons 
(EMP-S5 only)
Adjusts the image size.
If pressed when a configuration menu or a help 
screen is displayed, these buttons select menu 
items and setting values.
sQuick Start Guide, p.23
Name
Function 

Part Names and Functions
10
Remote Control
Illustrations show EMP-X5/S5.
Name
Function
A
[Power] button
Turns the projector power on or off.
 sQuick Start Guide
B
[Source Search] 
button
Changes to the next input source that is 
connected to the projector and is sending an 
image.sp.13
B A
K N
H
G C
I D
E
FJ P
L M O
C
[Menu] button
Displays and closes the configuration menu. 
sp.23
D
[Enter/Auto] 
button
If pressed during projection of computer signal 
images, it automatically adjusts the tracking,...