Epson Projector Emp Tw200 User Manual

19
Configuration Menu Functions
Configuration Menu
If aspect is set to Zoom when viewing images with subtitles, change the setting as 
follows so that the subtitles are visible. The vertical size and the display position can 
both be adjusted together.
•Ve r t i c a l  S i z e
The vertical size of the 
image is reduced so that the 
subtitles are displayed.
0
•Zoom Position
The whole of the image is 
moved up so that the 
subtitles are displayed.
Median value (0)
This is used to correct keystone...

20
Configuration Menu Functions
This turns the trigger function on and off to determine whether the projectors power on/
off status and problems with projector operation are communicated to an external 
device.
If you change the setting, the new setting will take effect after the power has been turned 
off and the cool-down period is complete.
OFF
This sets whether the following lock functions are turned on or off. When a lock 
function is turned on, a   is displayed on the screen when a locked operation...

21
Configuration Menu Functions
Configuration Menu
This sets whether the start-up screen (the image that is projected when projection starts) 
is displayed (ON) or not displayed (OFF).
If you change the setting, the new setting will take effect after the power has been turned 
off and the cool-down
 period is complete.
ON
(Adjustment is only possible when composite video or S-Video signals are being 
input)
This sets the video signal format. If Auto is selected, the video signal format is set...

22
Configuration Menu Functions
Reset menu
This initialises the lamp operating time. When this command is selected, the cumulative operating time for the 
lamp is cleared and returned to the default setting.
This resets (erases) all settings that have been made using the Memory: Standard and Memory: Advance 
commands. Memory: Advance settings can be saved using the Cinema Color Editor.
This resets all configuration menu settings to their default settings. The Memory: Standard, Memory: 
Advance, Input...

23
Configuration Menu Functions
Configuration Menu
Using the Configuration Menus
Displaying a menu
Selecting a menu item
Use   and   to select a menu item, then press  .
Changing settings
If you press   when an item with   next to it is selected, the selection screen for that item 
will be displayed.
To return to a previous display, press  . Alternatively, select [Return] and then press  .
When setting is complete
Press .
Full menu: Press  .Line menu: Press  .
The line menu cannot be activated when...

24
Preparation for Using Cinema Color Editor
Installing Cinema Color Editor
If any other applications are open, close them before installing Cinema Color Editor.
Insert the accessory Cinema Color Editor CD-ROM into your CD-ROM drive.
A virus check program window will be displayed, so check the contents of this window and 
then click [Continue].
The software verification window will be displayed.
Check the settings and then click [Install].
Installation will start. Follow the instructions which appear on...

25
Preparation for Using Cinema Color Editor
Adjusting projected images using a computer
 
Uninstalling Cinema Color Editor
If you no longer require Cinema Color Editor, uninstall it by following the procedure below.
Connecting to a Computer
In order to use Cinema Color Editor to adjust the quality of images, connect the computer to the 
projector using a USB cable or an RS-232C cable.
l
Windows
From My Computer, open the Control Panel, 
double-click Add or Remove Programs, 
select Cinema Color Editor,...

26
Using Cinema Color Editor
The following information describes how to use the Windows edition of the program. The Macintosh 
edition works in basically the same way.
Starting Cinema Color Editor
Operations using the Computer
Adjusting the color hue and 
saturation
Click to go to remote control window
Click to go to picture 
quality window
Drag the gauge button to the left or right to adjust. *
Click to increase or decrease the value.
Type in a value and press the [Enter] or 
[Return] key on your...

27
Using Cinema Color Editor
Adjusting projected images using a computer
Saving adjustments/Loading 
adjustments from a file
Click a button to carry 
out the same 
operation as the 
remote control button.
Check that the power for the projector to be adjusted is turned on, then start Cinema Color Editor.
For Windows   : Click Start     Programs     EPSON Projector     Cinema Color Editor in that order.
For Macintosh : Click Finder and then Applications from the Dock (Macintosh HD), and then 
double-click...

28
Using Cinema Color Editor
Saving customised settings 
into memory
Saving/loading memory settings and 
editing memory area names
Saving customised 
settings into memory
M
Se
Th
av
ca
th
C
St
A
Se
fro
Select the memory area to be used for 
saving using the memory list.
Click [Save in File].
Select the saving location, type in a 
filename and then click [Save].
If a file with the same name already exists, a 
message will be displayed. 
Saving adjustment 
values into memory
S
th
C
In
w
to
T
al
an
e
A Mem...