Epson Projector Emp Tw20 User Manual

19
Basic Image Quality Adjustments
Image Quality Adjustments
SqueezeNormalZoom
Living Room
Natural
Theatre
Theatre 
Black 1
Dynamic
Theatre 
Black 2
Input signals will be projected 
at the same width as the 
projectors panel resolution. Black bands will appear at 
the left and right of the 
images.Input signals will be projected 
at the same height as the 
projectors panel resolution.
If 4:3 images are projected, 
the top and bottom of the 
images will be truncated.
If images with subtitles are...

20
Advanced Colour Adjustments
The projector allows you to select the optimum colour settings for the images being projected by selecting the 
appropriate colour mode. 
To render the picture even more to your own liking, adjust the “Color Temp.” and “Skin Tone”.
The adjusted values can be stored in the memory so that you can retrieve them and apply them to the 
projected images at any time.  p.22
Colour Temperature Skin Tone
Selection menu operations
Colour Temperature Skin Tone
* If you press     , the...

21
Advanced Colour Adjustments
Image Quality Adjustments
Skin tone adjustment
Colour temperature 
High Low
Blue
RedGreen
PurpleWhite
This can be used to adjust the skin tones for images of people.
The Epson Cinema Filter effect that is automatically applied to images when a Color Mode setting 
is made creates natural-looking skin tones. If you would like to further enhance skin tones, use this 
Skin Tone setting to make the adjustment.
If set to the + side, the colours become greenish, and if set to the...

22
Viewing Images at a Preset Image Quality (Memory Function)
After menu commands such as Picture Quality and Screen have been used to adjust the projected 
images, the adjustment values can then be saved.
In addition, the saved data can be retrieved easily, so that you can enjoy viewing images with the 
adjusted settings at any time.
Saving Image quality adjustments 
(Memory save)
Retriving image quality 
adjustments (Memoru retrieve)
Retrieving image quality 
adjustments (Memory retrieve)
Configuration...

23
Viewing Images at a Preset Image Quality (Memory Function)
Image Quality Adjustments
The Cinema Color Editor program can also be used to store and retrieve memory settings from a 
computer. A computer can be used to make detailed adjustments and these adjustments can be stored 
using the Memory: Advance menu command.
TIP
The following describes how to save settings.
Adjust the desired settings that you would like to save in memory.
Select Save Memory from the Image menu and then press      .
Select a...

24
Configuration Menu Functions
The configuration menus can be used to make a variety of adjustments and settings involving the screen, 
image quality and input signals. 
Refer to Using the configuration menus ( p.32) for details on menu operations.
List of configuration menus
If no image signals are being input, none of the settings can be adjusted except for Auto Setup in the 
Image menu. The items displayed in the Image menu and the Info menu will vary depending on 
the type of image signals that are...

25
Configuration Menu Functions
Configuration Menu
ResolutionSleep Mode
p.27
p.28
p.29
p.30
p.30
p.30
p.30
p.31
p.31
p.31
This can only be set when 525i or 525p 
component video signals  are being input or when 
NTSC signals from composite video or S-Video 
are being input.This can only be set when component video 
signals or RGB video signals are being input.
Setting menu
Screen
Progressive
Aspect
Position
Zoom Caption
Output Scaling
Keystone
Operation
Users Logo
Display
ON, OFF
Auto, Normal, Squeeze,...

26
Configuration Menu Functions
Image menu
The brightness of the images can be adjusted.
If projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting.
Adjusts the difference between bright and dark areas.
When the contrast is increased, images with greater modulation are obtained.
This adjusts the colour intensity for the images.
(Adjustment is only possible when composite video
 and S-Video signals in NTSC format are being
input.)
This adjusts the image tint....

27
Configuration Menu Functions
Configuration Menu
Setting menu
  
  This can be used to save the current configuration menu settings.   p.22
This retrieves settings stored in the memory.   p.22
This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts
images to their optimum condition when the input signal is changed. The three automatically adjusted
items are Tracking
, Position and Sync. 
This returns all settings in the Image menu to their default...

28
Configuration Menu Functions
If Aspect is set to Zoom when viewing images with subtitles, change the setting as follows so that
the subtitles are visible. The vertical size and the display position can both be adjusted together.
•Vertical Size
The vertical size of the image is
reduced so that the subtitles are
displayed.
•Zoom Position
The whole of the image is moved
up so that the subtitles are dis-
played.
During input of component video or RGB-video signals only, this permits alteration of the...