Epson Projector Emp Tw10h User Manual

Installation-9
Before Using the Projector
Other installation methods
fProjecting when upside down
(Front/Ceiling)
Attach the enclosed rubber feet to prevent the operation 
panel from contacting the surface on which it is placed.
fCeiling projectionfCeiling/Rear projection
(Using a translucent screen)
fRear projection
(Using a translucent screen)
*The optional ceiling mount is required when installing the projector from a ceiling. Please contact your dealer if you wish 
to use this method, as special...

10-Connecting a Computer
Connecting Equipment
Connecting a Computer
See the Quick Reference Guide for instructions on connecting to video equipment.
Compatible computers
fLaptop connection
Setup examples
Windows: 
Press and hold the [Fn] key, followed by the appropriate 
function number key.
Macintosh:
After start up enable Mirroring in the Monitors Control 
Panel.Refer to your computer’s documentation for further 
details.
c
When connecting, be sure to:
• Turn off the power for both the projector and...

Connecting a Computer-11
Connecting Equipment
Outputting images and audio from a computer
Adjusting computer generated images
fAuto setup (Computer connections)
The computer signal is analysed and the following settings are adjusted to ensure the optimum image quality.
 Tracking
g
 Position
Sync.
g
Adjust the Tracking and Sync settings manually if Auto setup cannot be performed. ([Menu] button → Image → Picture 
Quality → Tracking, Sync.) sImage menu P.13
Computer cable (optional) To monitor port To...

12-Menu operation
Configuration Menus
Menu operation
1Press the [Menu] button. 
The top configuration menu is displayed.
2Press the [u] or [d] buttons to select 
the Top Menu item.
3Press the [e] button.
A Sub Menu is displayed.
4Press the [u] or [d] buttons to select 
the Sub Menu items, then press the 
[e] button.
5Settings can be changed in the 
follwing ways:
(a)Press the [l] or [r] buttons to change the 
setting values.
(b)Press the [u] or [d] buttons to select the 
menu item.
Then press the [e]...

Function list-13
Function list
fImage menu
 The functions in the Image Menu will be different according to the type of signal which is being input.
 When no signal is being input, only the settings for Auto Setup can be adjusted.
Video (Video/S-Videog/Component)RGB (RGB-Video/Analog RGB)
Sub menuFunction
Picture 
QualityBrightness Adjusts the brightness of the image.
Contrast
gAdjusts the contrast of the image.
Sharpness Adjusts the sharpness of the image.
Saturation
(Video only)Adjusts the colour...

14-Function list Configuration Menus
fSetting menu
Sub menuFunction
Screen Position Moves the image display position vertically and horizontally.
 Press the [e] button and adjust the display area on the Position adjustment screen which 
is displayed. 
Zoom 
CaptionAdjustment is possible only when the Zoom aspect function has been selected.
 Vertical size : You can adjust the vertical size of the image.
 Zoom Position: You can adjust the vertical movement of the display position.
Keystone Corrects...

Function list-15
Configuration Menus
fInfo menu
fReset menu
Video/S-VideoInput A/Input B
When component video is being input into the Input A port, 
the Refresh Rate and Sync Info will not be displayed.
Sub menuFunction
Lamp Hours Displays the cumulative lamp operating time. From 0 to 10 hours, 0H is displayed. After 
10 hours, the usage time is displayed in hourly increments.
 When the accumulated usage time of the lamp reaches the appropriate time (*), a 
warning will be displayed in red.
* If Theatre...

16-When You Suspect a ProblemTrouble.fm3/2/04
Troubleshooting
When You Suspect a Problem
First, check the indicators on the projector.
There are two indicators on the projector unit 
which notify you of projector conditions.
Power indicator
lit   flashing
•If the indicator is not lit, the power supply is not on.
Warning indicator
lit   flashing •Not lit under normal operating conditions.
ConditionCause/Remedys
OrangeStandby state (Not abnormal)
The power cable should only be disconnect ed when the...

When You Suspect a Problem-17
Troubleshooting
When the indicators provide no help
fNo images appear (Nothing is displayed)
fNo images appear (Messages are displayed)
p
 If problems with projection do occur, but the indicators do not show any abnormal conditions, please refer to the section 
below, When the indicators provide no help.
 If a condition occurs which is not listed in this table, please consult your dealer or contact the nearest address provided in 
the International Warranty Conditions in...

18-When You Suspect a Problem Troubleshooting
fImage is out of focus (unclear)
fImage is distorted / Image contains interference
fOnly part of the image is displayed (large/small)
fImage colours are poor, tinted green or tinted red/purple
 The image is fuzzy
 Part of the image is 
out of focus
 The whole image 
is out of focus Is the projector at the 
correct distance from the 
screen?The optimum range for projection is 73-1165cm (2.4-
38.2ft.). Set the projector within this range. 
sInstallation...