Epson Projector Emp Tw1000 User Manual

9
Appearance
406
Centre of projector
Centre of lens
*1 Distance from centre of lens to suspension bracket fixing point (Lens shift amount: Max. 8.8 mm vertically)
*2 Distance from centre of lens to centre of projector (Lens shift amount: Max. 7.7 mm horizontally) 110
*2
131.5
66
*1
19124
310 77.3
4-M4 ×8
Units:mm
52.8
Centre of lens
160
300 143 

10
Setting up
Adjusting the projection size
17 to -17 (6.8 to -6.8)
23 to -23 (9.1 to -9.1 )
35 to -35 (13.6 to -13.6)
58 to -58 (22.7 to -22.7)
69 to -69 (27.2 to -27.2) 46 to -46 (18.2 to -18.2)
86 to -86 (34.0 to -34.0)
Centre of lens Lens shift 
To p
Lens shift 
BottomOffset
Offset
Projection distance
Adjusting the projection size
Lens shift adjustment
The size of the projected image is basically determined by the distance \
from the projectors lens 
to the screen.
Hanging from the ceiling
A screen...

11
Setting up
Installing the Projector
* When suspending the projector from a ceiling, change the configuration menu settings.       p.34
Projection methods
When projecting from directly in front
When projecting from a celling When projecting from the side of 
the screen
* Even if projection will be from the screen 
side, set up the screen and projector so that 
they are parallel.
Configuration menu
Settings Projection
Front
Front/Ceiling
Avoid setting the projector up in a place which is very dusty or...

12
Connecting Image Sources
*1 If a DVD has been connected using a D SCART adapter, change the D/SCART setting in the Input Signal to 
SCART.  p.34
*2 Some regions may not have the D SCART adapter included as an accessory.
• Turn the power off for both the projector a nd the signal source before connecting them. 
If the power for either device is on at the time of connection, damage may result.
• Check the shapes of the cable connectors and the device ports before making the 
connections. If you try to...

13
Installing the Projector
Preparing the Remote Control
Inserting batteries into the remote control
The remote control is not supplied with batteries already inserted. Insert the accessory batteries
before using the remote control.
If delays in the responsiveness of the remote control occur or if it does not operate
after it has been used for some time, it probably means that the batteries are
becoming flat. If this happens, replace the batteries with two new batteries. Use two
new AA batteries as...

14
Projecting Images
Turning the power on and projecting images
TIP
If you set the Direct Power On to On, the power of the unit will turn ON when 
the main power switch is turned ON, without having to press the power button of 
the remote control or the projectors control panel. 
If there is a problem with projection even though the projector is set up and connected correctly, 
refer to       p.15, 36.
The projector is equipped with a Child Lock function that prevents young 
children from accidentally...

15
Projecting Images
Basic Operations
When the expected images are not 
projected
Turning the power off
Simply pressing    or    does not stop 
electricity consumption.
When the expected images are not projected
If more than one signal source has been connected, or if no images are p\
rojected, use the remote control or the 
projectors control panel buttons to select the signal source. For video devices, press the [Play] button on the video 
equipment first, then select the signal source. 
Using the...

16
Adjusting the Projection Screen
Focus adjustment
Fine adjustments to image size (Zoom 
adjustment)
Projection image position adjustment 
(Lens shift)
The lens shift function can be used to move 
the image display position vertically and 
horizontally within the range shown in the 
figure on the right when you cannot set up 
this projector directly in front of the screen, 
or when the image is projected too low or 
too high. 
When you turn the lens shift dial and hear a 
click, the lens position is...

17
Adjusting the Projection Screen
Basic Operations
Correcting projector tilt
Displaying a test pattern
Extend ExtendRetract Retract
Correcting projector tilt
If the projected images are tilted horizontally (           ), use the\
 front adjustable feet to adjust the projector 
so that it is horizontal.
You can project a test pattern at times such as when setting up the proje\
ctor in order to perform 
adjustments in the line menu, and zoom and focus adjustments without having to connect video...

18
Basic Image Quality Adjustments
Selecting the colour modeSelecting the aspect
Press      or      on the remote control 
or    on    on the projectors control 
panel to select an item.
Press      or      to confirm the 
selection.
 *If you press     , the Select menu disappears.
If you project an image that is 
compressed, enlarged or separated 
using the aspect function in public 
places such as a store or hotel for 
the purposes of profit-making or 
public display, it may result in 
infringing on...