Epson Projector Emp Tw100 User Manual

Printed in Japan
402168000
(9002466)
02.01-.6A(C05)
Printed on 100% recycled paper.
E 

About The Manuals and Notations Used
The documentation for your EPSON projector is divided into the following four manuals. Refer to the 
manuals in the order given below.
Unpacking and Installation Guide
This manual contains information on the procedures from unpacking the projector through to starting to use the 
projector, and also describes the included accessories.
Safety Instructions/World-Wide Warranty Terms
This manual contains information on using the projector safely, and also includes safety...

1
Contents
Features of the Projector ................................................................................... 2
Basic Operations
Turning On the Projector.................................................................................... 6
Connecting the Power Cord ..................................................................................... 6
Turning On the Power and Projecting Images.......................................................... 7
Turning Off the...

2
Features of the Projector
80-inch
screen
Adoption of a wide 1280 x 720 dot panel
This panel allows high-definition images to be 
reproduced accurately.
Adoption of a special high-resolution DCDi   video circuit developed by Faroudja.
This circuit greatly reduces the jagged edges that 
resulted from conventional progressive conversion, 
to produce much smoother and natural movement.
(p.29)
Adoption of a three-dimensional Y/C separation function in the video processing circuit
This greatly reduces the...

3
*Speakers are not included with the projector and must be purchased separately. 

5
Basic 
Operations
This chapter describes basic operations such as turning 
the projector on and off and adjusting the projected images.
Turning On the Projector ................................... 6
•
•• •Connecting the Power Cord ............................................... 6
•
•• •Turning On the Power and Projecting Images.................. 7
Turning Off the Projector ................................... 8
Adjusting the Screen Image ............................ 10
•
•• •Adjusting the Image Size...

6
Turning On the Projector
This section describes the procedure from turning on the power to projecting images.
Procedure
1Check that the power is turned off for 
the projector and all components 
connected to the projector.
2Connect the computer or other video 
source to the projector.
Refer to the Setup Guide.
3Remove the lens cover.
4
Connect the accessory power cord to 
the projector.
Check that the power cord connector is facing the 
same way as the power inlet on the projector, and 
then insert the...

7
Basic Operations
Procedure
1
Turn on the power for all equipment 
connected to the projector.
For a video source, press the [Play] button at the 
video source to start playback if necessary.
Check that the   indicator on the projector has 
stopped flashing and lights orange.
2Press the [Power] button on either the 
remote control or the projectors 
control panel to turn on the power.
The   indicator flashes green, and after a short 
period projection starts.
Check that the   indicator has stopped...

8
Turning Off the Projector
Follow the procedure below to turn off the power of the projector.
Procedure
1Turn off the power for the signal 
sources that are connected to the 
projector.
Check that the power for all connected 
components has been tuned off.
2Press the [Power] button on either the 
remote control or the projectors 
control panel.
The confirmation message shown at left will 
appear.
If you do not want to turn off the power, press 
any button except the [Power] button.
If you do not carry...