Epson Projector Emp 9300 Quickstart Guide

Video
Audio
Color Mode Position
Tracking
Sync.
Brightness
Contrast
Sharpness
:
: :
: :
Select 0000
     0
     0
    0
+
-
+
-Adjust
[Presentation    ]:
:ResolutionResolution
ResetResetExecuteExecute
:[
]
[    ]: Enter [    ]: Select[Menu]: Exit
Reset All About Advanced2 Advanced1 Users Logo Setting EffectPresetPreset
AutoAutoManualManual
AutoAutoManualManual
SetSet
Adjust
Select
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
Color Mode
Resolution
Preset
ResetBrightness
Contrast
Sharpness
Color...

Active window
Computer1 (Analog-RGB)
BNC Video
S-VideoComputer1
Computer2
DV IThe image can be changed directly by selecting the desired 
image source with the [Source] button. 
1. Press the         button.
2. To view the images in more detail, switch to the active window.
Tilt the       button to select an image and then press the        
button.
3. Project the images in the active window.
Press the        button.
    If only one signal source is connected, images from that source will be projected...

Do the input signal settings 
match the projector settings?
(When connected to the [BNC] port)
Has the computer been set for 
dual display?
Were the projector and 
computer connected while 
their power was already 
turned on?If the connection is made while the power is already turned on, the 
function [Fn] key that switches the computers video signal to external 
output may not work. Turn the power for the connected computer and 
the projector off and then back on.
Do the input signal settings 
match the...

Adapters(commercially-
available)
Computer 
cable or
VGA-HD15 
PC cable 
(accessory or
optional)
RGB video 
cable
(commercially- 
available)
Component 
video cable
(commercially- 
available)
S- Video 
cable
(commercially- 
available)
RCA video 
cable
(commercially- 
available)
(RCA pin jack (yellow))
To video 
output port
(Mini DIN 4-pin)
To S-Video 
output port
(RCA pin jack × 3
(red, green, blue))
To component video
output ports
(3BNC)
To RGB 
output ports
(Mini D-Sub 15-pin)
To RGB 
output port
To...

The lamp is near the end of its operating life. Replace the lamp with a new one as soon as possible.
If you continue to use the old lamp, the possibility that the lamp may break will increase.
The lamp will switch off automatically 
and projection will stop.
Wait for approximately 5 minutes.
After this, check the points to the 
right. (With the EMP-8300, disconnect 
the power plug first.)
Users Guide Replacing the Lamp
If you continue using the projector and 
the temperature rises again, the lamp 
will...

Signal Refresh rate (Hz) Resolution (dots)Resolutions for resized display (dots)
EMP-9300 EMP-8300
SVGA
XGA
SXGA
SXGA
SXGA+
UXGA
MAC13
MAC16
MAC19
MAC21
SDTV
(525i,525p,625i,625p)
HDTV(750p)
HDTV(1125i,1125p)VGA EGA
56/60/72/75/85/100/120, iMac*1 60/72/75/85/100/120, iMac*1
60/70/75/85/100, iMac*1
60/70/75/85
60/75/85
60
60/65/70/75/80/85640 × 480
800 × 600
1024 × 768
1152 × 864*2
1280 × 960*2
1280 × 1024*2
1400 × 1050*2
1600 × 1200*2
640 × 480
832 × 624
1024 × 768
1152 × 870*2 640 × 350
1024 × 768
1024...