Epson Projector Emp 9100nl User Manual
Here you can view all the pages of manual Epson Projector Emp 9100nl User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Menu Operations - 69
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
·The information menu displays the status of the input source settings being projected.
Adva
ncedComp2 Sync
TerminationSets the Computer #2 termination mode to enable image pro-
cessing from a Port.
On: Terminated in analog (75)
OFF: TTL input
·Usually used at [OFF]. Set at on with the switcher...](http://img.usermanuals.tech/thumb/23/90097/w300_epson-emp-9100nl-manual_d-70.png "Page 71
Menu Operations - 69
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
·The information menu displays the status of the input source settings being projected.
Adva
ncedComp2 Sync
TerminationSets the Computer #2 termination mode to enable image pro-
cessing from a Port.
On: Terminated in analog (75)
OFF: TTL input
·Usually used at [OFF]. Set at on with the switcher...")
Menu Operations - 69 · The image menu and information displayed will differ in accordance with the projected input source, and Menus other than that belonging to the projected input source cannot be adjusted. ·The information menu displays the status of the input source settings being projected. Adva ncedComp2 Sync TerminationSets the Computer #2 termination mode to enable image pro- cessing from a Port. On: Terminated in analog (75) OFF: TTL input ·Usually used at [OFF]. Set at on with the switcher...
Page 72
![Page 72
70 - Menu Operations
User logo registration
Registers the images currently displayed as the user logo.
1Displays the image that is to be registered as the user logo.
2Press the [Menu] button and select [Capture] - [Capture User Logo].
The confirmation screen will be displayed.
3Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image to be registered will be displayed.
4Adjust the position of the image and then press the [ (Enter)] button...](http://img.usermanuals.tech/thumb/23/90097/w300_epson-emp-9100nl-manual_d-71.png "Page 72
70 - Menu Operations
User logo registration
Registers the images currently displayed as the user logo.
1Displays the image that is to be registered as the user logo.
2Press the [Menu] button and select [Capture] - [Capture User Logo].
The confirmation screen will be displayed.
3Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image to be registered will be displayed.
4Adjust the position of the image and then press the [ (Enter)] button...")
70 - Menu Operations User logo registration Registers the images currently displayed as the user logo. 1Displays the image that is to be registered as the user logo. 2Press the [Menu] button and select [Capture] - [Capture User Logo]. The confirmation screen will be displayed. 3Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The image to be registered will be displayed. 4Adjust the position of the image and then press the [ (Enter)] button...
Page 73
![Page 73
Menu Operations - 71
5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The enlargement setup screen will be displayed.
6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the
[Enter] button on the remote control).
The screen to confirm saving will be displayed.
7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image will be saved. Wait until...](http://img.usermanuals.tech/thumb/23/90097/w300_epson-emp-9100nl-manual_d-72.png "Page 73
Menu Operations - 71
5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The enlargement setup screen will be displayed.
6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the
[Enter] button on the remote control).
The screen to confirm saving will be displayed.
7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image will be saved. Wait until...")
Menu Operations - 71 5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The enlargement setup screen will be displayed. 6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The screen to confirm saving will be displayed. 7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The image will be saved. Wait until...
Page 74
![Page 74
72 - Introduction of Projector Software
Introduction of Projector Software
The projector software includes the following.
Outline of Projector Software
The various types of Projector Software available are explained below.
EMP Link V
Enables the projector settings to be amended from the computer. This allows functions to be
allocated to the [Effect] button and user logos to be edited (refer to the EMP Link V Users’
Guide (PDF)).](http://img.usermanuals.tech/thumb/23/90097/w300_epson-emp-9100nl-manual_d-73.png "Page 74
72 - Introduction of Projector Software
Introduction of Projector Software
The projector software includes the following.
Outline of Projector Software
The various types of Projector Software available are explained below.
EMP Link V
Enables the projector settings to be amended from the computer. This allows functions to be
allocated to the [Effect] button and user logos to be edited (refer to the EMP Link V Users’
Guide (PDF)).")
72 - Introduction of Projector Software Introduction of Projector Software The projector software includes the following. Outline of Projector Software The various types of Projector Software available are explained below. EMP Link V Enables the projector settings to be amended from the computer. This allows functions to be allocated to the [Effect] button and user logos to be edited (refer to the EMP Link V Users’ Guide (PDF)).
Page 75
Computer Connections - 73 Computer Connections Establish a serial connection between the computer and projector when EMP Link V is being used. The computer and projector can be connected together with serial. Serial Connections Point ·Depending on the shape of the computer port, an adapter may be required for connection purposes. Refer to the computer’s instruction manual for further details. ·The connected computer is used to amend the projector settings and to perform opera- tions. Connect the...
Page 76
74 - Computer Connections Macintosh Computers Connect the projector’s Mouse/Com Port to the computer’s printer port or modem port with the use of the Mac Serial Cable and main cable supplied. MAC SERIAL Mouse/Com Port Main Cable (supplied with the projector) Mac Serial Cable (supplied with the projector) Printer port or Modem port
Page 77
Installation - 75 Installation This section explains how to install the EMP Link V. Operating environment Check the following to ensure that the software can operate on the computer in use. Windows Operating Environment 20MByte or more is required for the Chinese and Korean languages. Macintosh Operating Environment 15MByte or more is required for the Japanese language, and 25MByte or more is required for the Korean language. Wi n d o w s Operable computer NEC PC98-NX series or DOS/V computers...
Page 78
76 - Installation Installation This section explains how to install the software using the Windows 98 screens. Software instal- lation into the Windows 95 platform follows the same procedure. Point The EMP Link V User’s Guide is stored on the CD-ROM in the PDF format. As Acrobat Reader is required to read this, it is recommended that it is installed at the same time as EMP Link V for computers that do not have this function. In the case of Windows 1Start up Windows and set the CD-ROM in place. The...
Page 79
![Page 79
Installation - 77
In the case of the Macintosh
1Start up the Macintosh and then set the CD-ROM in place.
2Double-click on the EMP Link Installer icon.
The set-up program will start up automatically.
3Select the language and click on the [OK] button.
Proceed with all subsequent screens in accordance with the instructions provided.
Point
Drag the [EMP LinkV] folder and [EMP LinkV] contained in [System] – [Default Settings]
into the trash can to un-install the program.
Reading the User’s Guide
In the...](http://img.usermanuals.tech/thumb/23/90097/w300_epson-emp-9100nl-manual_d-78.png "Page 79
Installation - 77
In the case of the Macintosh
1Start up the Macintosh and then set the CD-ROM in place.
2Double-click on the EMP Link Installer icon.
The set-up program will start up automatically.
3Select the language and click on the [OK] button.
Proceed with all subsequent screens in accordance with the instructions provided.
Point
Drag the [EMP LinkV] folder and [EMP LinkV] contained in [System] – [Default Settings]
into the trash can to un-install the program.
Reading the User’s Guide
In the...")
Installation - 77 In the case of the Macintosh 1Start up the Macintosh and then set the CD-ROM in place. 2Double-click on the EMP Link Installer icon. The set-up program will start up automatically. 3Select the language and click on the [OK] button. Proceed with all subsequent screens in accordance with the instructions provided. Point Drag the [EMP LinkV] folder and [EMP LinkV] contained in [System] – [Default Settings] into the trash can to un-install the program. Reading the User’s Guide In the...
Page 80
![Page 80
78 - Troubleshooting
Troubleshooting
When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to
advise the user of the projector’s status.
Operation Indicator
Indicator StatusCauseRecovery or StatusReference
Page
Illuminated in
OrangeStand-by status (Not an error)
Projection will be started when the [Power]
button is pressed.39
Blinking in
OrangeCool-down proce-
dure in...](http://img.usermanuals.tech/thumb/23/90097/w300_epson-emp-9100nl-manual_d-79.png "Page 80
78 - Troubleshooting
Troubleshooting
When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to
advise the user of the projector’s status.
Operation Indicator
Indicator StatusCauseRecovery or StatusReference
Page
Illuminated in
OrangeStand-by status (Not an error)
Projection will be started when the [Power]
button is pressed.39
Blinking in
OrangeCool-down proce-
dure in...")
78 - Troubleshooting Troubleshooting When you think you have a problem, first of all check the Indicators on the projector. The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to advise the user of the projector’s status. Operation Indicator Indicator StatusCauseRecovery or StatusReference Page Illuminated in OrangeStand-by status (Not an error) Projection will be started when the [Power] button is pressed.39 Blinking in OrangeCool-down proce- dure in...