Epson Projector Emp 820 User Manual

69
Setting menu
Main menuSub-menuFunctionDefault 
setting
Setting V-Keystone Corrects vertical keystone distortion in images.
 When keystone correction is carried out, the 
projected image will become smaller.
 If using both horizontal and vertical keystone 
correction, first make the vertical correction and 
then make the horizontal correction in that order.
 The keystone correction settings are memorized, so 
that if you change the position or angle of the 
projector, you may need to readjust the...

70
Main menuSub-menuFunctionDefault 
setting
Setting P in P Sets the input source for the sub-screen of the Picture 
in Picture function to either Composite Video or 
S-Video.
 The Picture in Picture function can be used by 
pressing the [P in P] button. (P.60)Composite
No-Signal 
Msg.Sets the message status and background color at times 
such as when no video signal is being input.
 To change the users logo, you need to record and set 
your own logo. (P.98)Blue
Prompt Sets whether the source prompt...

71
Users Logo menu
Main menuSub-menuFunctionDefault 
setting
Users Logo Execute Records a users logo. (P.98)
 Press the   button and follow the procedure 
appearing on the screen.EPSON 
logo 

72
Advanced menu
Main menuSub-menuFunctionDefault 
setting
Advanced Language Sets the language for message displays.
 Press the   button and select the language from 
the selection menu that appears.English
Startup Screen Sets whether the startup screen is displayed or not.
 To change the users logo, you need to record and 
set your own logo.ON
Color Adjustment Adjusts the color temperature
 and intensity of 
each RGB color in the image.
Color Temp.: Sets the color temperature.
 Press the   button and...

73
The About menu shows the setting details for the current video source.
The Lamp setting appears as 0H for 0 – 10 hours, after that, it appears in 
units of 1 hour.
Computer (Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPr)
About menu
Main menuSub-menuFunctionDefault 
setting
About Lamp Displays the cumulative lamp operating time.
 When the lamp warning period is reached, the 
display characters appear in red.0H
Reset Lamp 
TimerInitializes the lamp operating time. When this 
command is selected,...

74
Video (S-Video, Video)
Main menuSub-menuFunctionDefault 
setting
About Lamp Displays the cumulative lamp operating time.
 When the lamp warning period is reached, the 
display characters appear in red.0H
Reset Lamp 
TimerInitializes the lamp operating time. When this 
command is selected, the cumulative lamp operating 
time is reset to the initial default value.-
Video Source Displays the input source which is currently being 
projected.
Video Signal Displays the video signal format. Auto
Reset All...

75
Using the Menus
The menus can be operated using either the remote control or the projectors 
control panel.
Procedure
1Press the [Menu] button on either 
the remote control or the 
projectors control panel.
The Main menu will be displayed.
2Select a menu item.
If using the control panel, press the
 [Sync +] or [Sync -] button.
If using the remote control, press the top 
or bottom of the   button.
3Confirm the selection.
Press the   button to confirm the 
selection of a menu item.
The selected sub-menu...

76
5Select a setting value.
If using the control panel, press the 
[Tracking -] or [Tracking +] button.
If using the remote control, press the left 
or right edge of the   button.
Tip :
 Sub-menu items which cause another sub-menu to be displayed when they are selected 
have   (Enter) after them. If you select such menu items and press the   button, 
you can then change the settings in the next sub-menu which appears.
 Refer to List of Functions for details on the functions of each menu item. (P.62)...

77
Appendices
This chapter provides information on troubleshooting and maintenance procedures 
to ensure the best level of performance for the projector for a long time.
Troubleshooting.................................................................78
 Using the Help ...................................................................................... 78
 When Having Some Trouble ............................................................... 80
 When the Indicators Provide No Help...

78
Troubleshooting
This section describes how to identify problems and what to do if a problem is 
found.
Using the Help
If a problem occurs with the projector, the Help function uses on-screen 
displays to assist you in solving the problem. It uses a series of menus in a 
question and answer format.
Procedure
1Press the [Help] button on either 
the remote control or the 
projectors control panel. 
The Help menu will be displayed.
2Select a menu item.
If using the control panel, the [Sync +] 
and [Sync...