Epson Projector Emp 8150 User Manual

							 Menu Operations - 69
Video Smooth Motion Images, etc., will move smoothly when seen after this has 
been set at [ON]. Set this at [OFF] if the colors appear to 
flicker.ON
Video Signal Sets the video signal method.
Press the [Enter] button and select the required setting from 
the video signal method selection menu displayed.
·The video signal method will be automatically set up in the 
[Auto] mode, but do not use the [Auto] mode for the PAL 
system (60Hz).Auto
Reset Returns all image menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to 
the default settings. (see page 72
)-
Audio Volume Adjusts the volume. 15
Treble Adjusts the strength of the high tones. Center value (0)
Bass Adjusts the strength of the low tones. Center value (0)
SRS SPACE Adjusts the width of the sound. 2
SRS CENTER Adjusts the depth of the sound. 2
Reset Returns all sound menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to 
the default settings. (see page 72
)-
Effect Cursor/Stamp Sets the shape, size, color and length of the cursor/stamps 
allocated to the [1] button.
Press the [Enter] button and select the item to be displayed 
from the cursor/stamp setup menu. The shape, size, color 
and length conditions can be set by pressing button types 1 
to 3 respectively (depending on the selected cursor shape, 
size, color and length cannot be set up.)
·The [1] button executes the cursor/stamp function. The 
cursor/stamp types will be switched between 1 and 3 
sequentially for each time the [1] button is pressed. (see 
page 59)Individual
settings 
between types 1 
to 3
Box Sets the use/non-use and shape of the color and shading of 
Box allocated to the [2] button.
Press the [Enter] button and select the required item from the 
Box setup menu.
·The [2] button executes the Box function. (see page 59
)Color: Magenta
Shading: No
Shape: Square
Spotlight Sets the size of the spotlight allocated to the [3] button.
Press the [Enter] button and select the required item from the 
spotlight setup menu.
·The [3] button executes the spotlight function. (see page 60
)Size: Medium
To p  
MenuSub MenuFunctionDefault Value 
						

							70 - Menu Operations
Effect Bar Sets the color, direction and width of the bar allocated to the 
[4] button.
Press the [Enter] button and select the required item from the 
bar setup menu. The color, direction and width can be 
selected independently for each of the settings between 1 
and 3.
·The [4] button executes the bar function. The bar types will 
be switched between 1 and 3 sequentially for each time the 
[4] button is pressed. (see page 61
)Individual
settings 
between types 1 
to 3
Cursor Speed Selects the speed of Cursor.
L: Slow M:Medium H:FastM
Reset Returns all effect menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to 
the default settings. (see page 72
)-
Setting Keystone Adjusts trapezoid distortion.
·The screen will be reduced in size when keystone correction 
has been performed.
·The status of keystone  correction will be recorded. Perform 
readjustments that match the installation position when the 
projection position or angle have been changed.
·Reduce the sharpness if blurring occurs after keystone  
correction. (see page 68
)Center value (0)
P in P Sets the input source for the P in P function’s sub-screen.
·The P in P function is executed by pressing the [PinP] 
button. (see page 62
)Composite
No Signal Msg The status for [No Image Signal Input] and other message 
display.
·The user logo must be registered and set up before it can be 
amended.Blue
Prompt Sets whether to display the input source on the screen or not. ON
A/V Mute Sets up the screen status for when the [A/V Mute] button is 
pressed.
·User logos must be registered and set up before they can be 
amended. Black
BNC Sets the mode for the input image signals connected to the 
BNC port.
RGB: Enables RGB signals to be input.
YCbCr: Enables video signals to be input (YCbCr or YPbPr.)RGB
To p  
MenuSub MenuFunctionDefault Value 
						

							 Menu Operations - 71
Setting Sleep Mode Sets the energy-saving function for when no image signals 
are being input. When this is set at [ON], projection will be 
automatically ended and the projector will enter the sleep 
mode if no image signals are input and no operations are 
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.ON
Reset Returns all setting menu adjustment values to the default 
values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to 
the default settings. (see page 72
)-
Cap-
tureImage capture Captures the projected image and saves it on the memory 
card as a JPEG format image file.
It is possible to view images saved onto the memory card 
and copy them onto computers connected to the network 
with the EasyMP.net Easy Review and Easy File functions.
(see page 73
)-
User’s Logo 
CaptureRegisters user logos. (see page 75
)
Press the [Enter] button and follow the instructions dis-
played on the confirmation screen.
·The saving procedure requires a certain amount of time to 
complete. Do not attempt to operate the projector or the 
equipment connected to the projector while this procedure 
is running. Failure to observe this may result in damage.
·The size that can be registered is 400 x 300 dots.
·The display size will be adjusted when video images are 
being projected.EPSON logo
Ad-
vancedLanguage Sets the language with which messages are to be displayed.
Press the [Enter] button and select the required language 
from the language selection menu displayed.
·The EasyMP.net screen is displayed in three interface 
languages only English, German and French. Even if 
another interface language is selected, the display language 
will not change.English
Startup Screen Displays the user logo during warm-up after the power has 
been switched on.
·The user logo must be registered and set up before it can be 
amended.OFF
Color Setting Adjusts the color temperature* of the image.
Auto: Automatically adjusts the color settings.
Manual: Press the [Enter] button and select the required item 
from the color setting menu displayed.
·Set the color temperature value to the yardstick value.
·The black level and white level settings are only used when 
multiple projectors are used in the stack formation.Auto
To p  
MenuSub MenuFunctionDefault Value 
						

							72 - Menu Operations
· The image menu and information displayed will differ in accordance with the projected input 
source, and Menus other than that belonging to the projected input source cannot be adjusted.
·The information menu displays the status of the input source settings being projected.
·If a message stating [Image capture failed] is displayed on the screen, there is a possibility that a 
system error occurred with EasyMP.net. Switch the projected image across to EasyMP.net and 
resolve the system error before moving onto the next procedure.
Ad-
vancedComp2 Sync 
Te r m i n a t i o nSets the Computer #2 termination mode to enable image pro-
cessing from a Port.
On: Terminated in analog (75
Ω)
OFF: TTL input
·Usually used at [OFF]. Set at on with the switcher when 
analog 75 termination is required.OFF
Rear Proj. Set at [ON] to project images onto a half-transparent screen 
from the rear. The projected image will be inverted.OFF
Ceiling Set at [ON] to project images when suspended from the ceil-
ing. The projected image can be be inverted from left to right 
and up and down.
·The optional ceiling suspension unit is required to suspend 
the projector from the ceiling.OFF
Reset Returns all advanced setting menu adjustment values to the 
default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to 
the default settings.-
About (Displays the current settings) -
Reset 
AllExecute Returns all items in the set-up menus to the default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Execute the [Reset] function from each individual sub menu 
to return the image and sound settings to the default values 
for each menu.
·The User’s Logo Capture, Lamp ON Time, language and 
BNC settings cannot be restored to the default values. 
Perform the reset procedure after the lamp has been 
replaced. (see page 97
)-
To p  
MenuSub MenuFunctionDefault Value 
						

							 Menu Operations - 73
Image capture
The image currently being displayed will be saved onto the memory card.
1Displays the images that are to be captured.
2Press the [Menu] button and then select [Capture] - [Image Capture].
A confirmation screen will be displayed.
3Select [Yes] and then press the [Enter].
A screen to reconfirm the image to be registered will be displayed.
4Select [Yes] and then press the [Enter].
The image will be saved. Wait for a moment until the saving completion screen is dis-
played.
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Execute:ReturnImage Capture
Users Logo CaptureExecute
Execute:Select
Image Capture
Do you save the present image
to the Memory Card?
Ye sNo
:Select :Return :Execute
Image Capture
Do you use this image?
Ye sNo
:Select :Return :Execute 
						

							74 - Menu Operations
5Press the [Enter] button or the [Esc] button.
The capture function will be ended and the screen will return to the menu.
Point
·A certain amount of time is required for the saving process. Do not operate the projector 
or connected equipment while saving is in progress. Failure to observe this may result in 
defects.
·Images cannot be saved if the memory card has not been inserted.
·Do not remove the memory card while images are being saved.
·A [Capture] folder will be created on the memory card when an image has been captured, 
and the contents of that screen will be saved in the jpg format.
·It is possible to view captured images and copy them onto computers connected to the 
network with the EasyMP.net Easy Review and Easy File functions.
·If a message stating [Image capture failed] is displayed on the screen, there is a possibil-
ity that a system error occurred with EasyMP.net. Switch the projected image across to 
EasyMP.net and resolve the system error before moving onto the next procedure.
·Images cannot be captured if the memory card has not been inserted.
·Images cannot be captured when EasyMP.net is being started up. Use Easy Capture to 
capture images when EasyMP.net is being started up. (Refer to the “EayMP.net Users 
Guide”.)
Image Capture
This image was saved as
        XXX.JPG
in this Memory Card.
:Return / 
						

							 Menu Operations - 75
User logo registration
Registers the images currently displayed as the user logo.
1Displays the image that is to be registered as the user logo.
2Press the [Menu] button and select [Capture] - [User Logo Capture].
The confirmation screen will be displayed.
3Select [Yes] and then press the [  (Enter)] button on the main unit (the [Enter] button 
on the remote control).
The image to be registered will be displayed.
4Adjust the position of the image and then press the [  (Enter)] button on the main unit 
(the [Enter] button on the remote control).
The confirmation screen will be displayed.
Image Capture 
Users Logo CaptureExecute 
ExecuteVideo
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Execute:Return:Select
Users Logo Capture
Do you use the present image
as a users logo?
Ye sNo
:Select :Return :Execute
:Move
/ :Return :Enter 
						

							76 - Menu Operations
5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button 
on the remote control).
The enlargement setup screen will be displayed.
6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the 
[Enter] button on the remote control).
The screen to confirm saving will be displayed.
7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button 
on the remote control).
The image will be saved. Wait until the [saving completed] screen is displayed.
Point
·A certain amount of time is required for the saving process. Do not operate the projector 
or connected equipment while saving is in progress. Failure to observe this may result in 
defects.
·The image size that can be registered is 400 x 300 dots.
·The display size will be amended when the video image is being projected.
Users Logo Capture
Do you use this image?
Ye sNo
:Select :Return :Execute
Users Logo Capture
Set the zoom rate.
zoom rate : 
:Select :Return :Execute
100%200%300%
Users Logo Capture
Do you save the users logo?
If you save it,
the previous users logo
will be overwritten.Ye sNo
:Select :Return :Execute 
						

							 Introduction of EasyMP.net Software - 77
Using the EasyMP.net Software
This section provides explanations on the operations required for installing the optional EasyMP.net Software and EMP link V.




 
Introduction of EasyMP.net Software
The EasyMP.net PC applications and EMP Link V presentation support software is stored on 
the [EasyMP.net Software] CD-ROM.
Presentation support software
 EMP Link V 
Enables the projector settings to be amended from the computer. This allows functions to be 
allocated to the [Effect] button and user logos to be edited (refer to the EMP Link V Users’ 
Guide (PDF)). 
						

							78 - Introduction of EasyMP.net Software
EasyMP.net PC applications
 EMP File
It is possible to control the files saved onto the projectors memory card remotely from a com-
puter.
 EMP Tablet
It is possible to operate the cursor and execute functions remotely with the computer mouse 
when EasyMP.net images are being projected.
 EMP Scenario
It is possible to create image scenarios for projection purposes.
Point
·Refer to the EasyMP.net Users Guide for details on using EasyMP.net and the 
EasyMP.net function PC applications.
·The EasyMP.net function PC applications will only operate on the Windows 95, 98 and 
NT4.0 platforms.
·It is possible to amend the projector settings from a remote location with EasyMP.net by 
connecting a personal computer to a network and using the browser installed on the PC.