Epson Projector Emp 8150 User Manual

 Connecting the video equipment - 39
In the case of the digital tuners D output port
·Connect the digital tuners to the projector’s Computer 2/Component Video- BNC port with 
the optional D port cable (ELPKC23).
·Connect the supplied RCA Audio Cable (Red/White) to the S-Audio/Audio2 Port if the 
sound is to be output from the projector’s speakers.
Point
·Set the BNC parameter to [YCbCr] when the connection has been established. (see 
page 70)
·Establishing connections with digital tuners is only possible...

40 - Connecting the video equipment
In the case of RGB image signals
·Connect the projector’s Computer 2/Component Video- BNC Port to the video equipment 
with the component image cable (available on the open market).
·Connect the supplied RCA Audio Cable (Red/White) to the S-Audio/Audio #2 Port if the 
sound is to be output from the projector’s speakers.
Point
·Purchase the component image cable so that one end matches the BNC type port on the 
projector and the other matches the port on the video...

 Projection - 41
Projecting
This section provides explanations on starting and ending projection, and on the basic functions for adjusting projected images.




 
Projection
Images can be projected after all connections have been completed.
Preparations
1Connect the projector to a computer and video equipment. (see page 27, 37)
2Remove the Lens Cover.
3Attach the supplied Power Cord to the projector.
Check to confirm the shape of the projector’s Power Inlet and Power Connector, align the 
connector in...

42 - Projection
4Plug the Power Plug into the power socket.
The Operation Indicator will be illuminated in orange.
Point
Button operations are not possible when the Operation Indicator is blinking in orange.
Commencing projection
1Press the [Power] button to turn on the power supply.
The Operation Indicator will begin to blink in green, and projection will be started.
The Operation Indicator blinks and then is illuminated in green after approximately thirty 
seconds.
Illuminated in orange Operation...

 Projection - 43
The projected screen will appear as follows in accordance with the situation.
Point
·Set the date and time when the EasyMP.net default setting screen is displayed. 
(Refer to the “EasyMP.net User’s Guide”.)
·Button operations are not possible when the Operation Indicator is blinking in green.
2Select the Port to which the connection has been made when more than one item of
 equipment has been connected.
Press the port button connected to the computer or video equipment to switch the...

44 - Projection
Point
Only one of the BNC ports sources (BNC (RGB) or (BNC (YCbCr)) that are alternately 
switched with [Comp/EasyMP.net] and [Video] on the projector and [Comp2/YCbCr] on the 
remote control will be displayed with the BNC setting. (see page 70
)
3Starting projection.
Switch on the power supply to the computer or video equipment. If the equipment con-
nected is video equipment, then also press the [Playback] or [Play] buttons.
The [No Signal] display will be erased, and projection will...

 Ending - 45




 
Ending
End projection in accordance with the following procedure.
1Swith off the power supply to the connected equipment.
2Press the [Power] button.
A message to confirm that the power needs to be switched off will be displayed.
3Press the [Power] button once more.
The lamp will be extinguished, the Operation Indicator will blink in orange, and the cool-
down process will commence.
The Operation Indicator will change from blinking to being illuminated in orange once the 
cool-down...

46 - Ending
4Check to confirm that the Operation Indicator is illuminated in orange, and then 
unplug the Power Plug from the socket.
5Set the R/C ON OFF switch to [OFF] when using the remote control.
Point
The batteries are being consumed when the [R/C ON OFF] switch on the remote control 
unit is set at [ON]. Ensure that the [R/C ON OFF] switch on the remote control unit is set to 
[OFF] when not in use.
6Restore the Front Foot if it has been extended.
Steady the projector by hand, and then lift the...

 Adjusting the projection position - 47




 
Adjusting the projection position
The projector can be adjusted into the following vertical projection positions.
Feet adjustments
Adjusts the projection angle of the projector. As far as possible, make the necessary adjust-
ments while making sure that the projector is facing the screen at right angles.
1Lift the Foot Adjust Lever with a finger and raise the front part of the projector.
The Front Foot will protrude.
2Remove your finger from the Foot Adjust...

48 - Adjusting the projection size




 
Adjusting the projection size
It is possible to adjust the size of the projection and correct any trapezoid distortion.
Point
A function to resize the screen (see page 56) and an E-Zoom function for enlarging certain 
areas (see page 58) are also available.
Zoom adjustment
1Rotate the Zoom Ring to make the required adjustments (enlargment up to a maximum 
of 1.4x is possible).
The projection distance must also be adjusted when enlarging the screen. (see page 24
)...