Epson Projector Emp 8100nl User Manual
Here you can view all the pages of manual Epson Projector Emp 8100nl User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
Troubleshooting - 79 Lamp Indicator Temperature Indicator Extinguished The power is not switched onThe power is not switched on. ·Check to ensure that the lamp or fan are correctly attached if the lamp has been replaced. If the lamp or fan are not correctly attached, the projector will assume the same status as if the power has not been switched on. ·Check the power cord connection. Check the power supply to the socket.39 Indicator StatusCauseRecovery and StatusReference Page Blinking in Red Lamp...
Page 82
![Page 82
80 - Troubleshooting
Point
·Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
·Contact your dealer if an Indicator status not covered by the above table is apparent.
Blinking in
OrangeHigh-temperature
cooling in progress(This is not an error, but the projector will
automatically cease operating if the tempera-
ture increases any further.)
·Use the projector within the permissible
temperature range...](http://img.usermanuals.tech/thumb/23/89700/w300_epson-emp-8100nl-manual_d-81.png "Page 82
80 - Troubleshooting
Point
·Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
·Contact your dealer if an Indicator status not covered by the above table is apparent.
Blinking in
OrangeHigh-temperature
cooling in progress(This is not an error, but the projector will
automatically cease operating if the tempera-
ture increases any further.)
·Use the projector within the permissible
temperature range...")
80 - Troubleshooting Point ·Refer to the section on [When the Indicators Provide No Help] on the following page if the Indicators appear normal but the projected image is defective. ·Contact your dealer if an Indicator status not covered by the above table is apparent. Blinking in OrangeHigh-temperature cooling in progress(This is not an error, but the projector will automatically cease operating if the tempera- ture increases any further.) ·Use the projector within the permissible temperature range...
Page 83
When the Indicators Provide No Help - 81 When the Indicators Provide No Help Refer to each relevant item if the following situations arise but the indicators provide no help. ·The image is not projected page 81 ·No sound page 86·The image is unclear page 83·The remote control won’t work page 87 ·The image is cut up (Large)/Small page 85·Cannot end page 87·The image color is bad page 85 ·The EMP Link V will not function page 88·The image is dark page 86 The image is not projected Nothing is displayed...
Page 84
![Page 84
82 - When the Indicators Provide No Help Messages
[Not Supported]
will be displayed
[No Signal]
will be displayed
Is the resolution of the image signal output from the computer
higher than UXGA (1,600 x 1,200)?
see page 25
Check to ensure that the mode supports the frequency of the image
signals output from the computer.
Refer to the computer’s instruction manual to discover how to amend
the resolution and frequency of the image signals output from the
computer.
see page 25
Have the cables been...](http://img.usermanuals.tech/thumb/23/89700/w300_epson-emp-8100nl-manual_d-83.png "Page 84
82 - When the Indicators Provide No Help Messages
[Not Supported]
will be displayed
[No Signal]
will be displayed
Is the resolution of the image signal output from the computer
higher than UXGA (1,600 x 1,200)?
see page 25
Check to ensure that the mode supports the frequency of the image
signals output from the computer.
Refer to the computer’s instruction manual to discover how to amend
the resolution and frequency of the image signals output from the
computer.
see page 25
Have the cables been...")
82 - When the Indicators Provide No Help Messages [Not Supported] will be displayed [No Signal] will be displayed Is the resolution of the image signal output from the computer higher than UXGA (1,600 x 1,200)? see page 25 Check to ensure that the mode supports the frequency of the image signals output from the computer. Refer to the computer’s instruction manual to discover how to amend the resolution and frequency of the image signals output from the computer. see page 25 Have the cables been...
Page 85
When the Indicators Provide No Help - 83 The image is unclear ·The screen is blurred. ·Focus can only be attained in certain areas. Has the focus been set correctly? see page 47 Has the projection angle been increased by adjusting the feet? There are cases where the vertical focus is difficult to align if the projection angle is too large. Is the projection distance suitable? The recommended projection distance range is between 1.1m and 14.6m. Locate the projector within this distance range. see...
Page 86
![Page 86
84 - When the Indicators Provide No Help
·The image is
disturbed.
·Noise appears
Has the cable been connected correctly?
see page 25, 35Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer’s instruction manual for details on how to amend the
signals.
see page 25
Has the [Sync., Tracking and Position] been adjusted?
The image can be adjusted by regulating the [Tracking] and [Sync]
buttons on the projector while monitoring the...](http://img.usermanuals.tech/thumb/23/89700/w300_epson-emp-8100nl-manual_d-85.png "Page 86
84 - When the Indicators Provide No Help
·The image is
disturbed.
·Noise appears
Has the cable been connected correctly?
see page 25, 35Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer’s instruction manual for details on how to amend the
signals.
see page 25
Has the [Sync., Tracking and Position] been adjusted?
The image can be adjusted by regulating the [Tracking] and [Sync]
buttons on the projector while monitoring the...")
84 - When the Indicators Provide No Help ·The image is disturbed. ·Noise appears Has the cable been connected correctly? see page 25, 35Is the selected resolution correct? Align the computer with the signals supported by the projector. Refer to the computer’s instruction manual for details on how to amend the signals. see page 25 Has the [Sync., Tracking and Position] been adjusted? The image can be adjusted by regulating the [Tracking] and [Sync] buttons on the projector while monitoring the...
Page 87
![Page 87
When the Indicators Provide No Help - 85
The image is cut up (Large)/Small
The image color is bad
·The image is cut
up
·The image is small
There is a possibility that the [Resize] setting has not been correctly
selected.
Press the [Resize] button.
see page 53
Has the [Position] been adjusted?
Adjust with [Menu] − [Video] − [Position].
see page 65
Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer’s instruction manual for...](http://img.usermanuals.tech/thumb/23/89700/w300_epson-emp-8100nl-manual_d-86.png "Page 87
When the Indicators Provide No Help - 85
The image is cut up (Large)/Small
The image color is bad
·The image is cut
up
·The image is small
There is a possibility that the [Resize] setting has not been correctly
selected.
Press the [Resize] button.
see page 53
Has the [Position] been adjusted?
Adjust with [Menu] − [Video] − [Position].
see page 65
Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer’s instruction manual for...")
When the Indicators Provide No Help - 85 The image is cut up (Large)/Small The image color is bad ·The image is cut up ·The image is small There is a possibility that the [Resize] setting has not been correctly selected. Press the [Resize] button. see page 53 Has the [Position] been adjusted? Adjust with [Menu] − [Video] − [Position]. see page 65 Is the selected resolution correct? Align the computer with the signals supported by the projector. Refer to the computer’s instruction manual for...
Page 88
86 - When the Indicators Provide No Help The image is dark No sound Is it time to replace the lamp? If the Lamp Indicator is blinking, it means that the time to replace the lamp is drawing near. When the time to replace the lamp draws near, the image will appear dark and the tint will deteriorate. In this event, replace the lamp with a new one. see page 92 Has the image brightness been correctly adjusted? see page 65 Has the contrast been correctly adjusted? see page 65 Has the sound input been...
Page 89
![Page 89
When the Indicators Provide No Help - 87
The remote control won’t work
Cannot end (after the [Power] button has been pressed)
Is the [R/C ON OFF] switch on the remote control on?
see page 40
Is the remote control being aimed in the correct direction?
The operable range of the remote control unit is 30° to the left and
right, and 15° up and down.
see page 20
Is the distance between the remote control and the projector too
great?
The operable distance of the remote control unit is approximately...](http://img.usermanuals.tech/thumb/23/89700/w300_epson-emp-8100nl-manual_d-88.png "Page 89
When the Indicators Provide No Help - 87
The remote control won’t work
Cannot end (after the [Power] button has been pressed)
Is the [R/C ON OFF] switch on the remote control on?
see page 40
Is the remote control being aimed in the correct direction?
The operable range of the remote control unit is 30° to the left and
right, and 15° up and down.
see page 20
Is the distance between the remote control and the projector too
great?
The operable distance of the remote control unit is approximately...")
When the Indicators Provide No Help - 87 The remote control won’t work Cannot end (after the [Power] button has been pressed) Is the [R/C ON OFF] switch on the remote control on? see page 40 Is the remote control being aimed in the correct direction? The operable range of the remote control unit is 30° to the left and right, and 15° up and down. see page 20 Is the distance between the remote control and the projector too great? The operable distance of the remote control unit is approximately...
Page 90
88 - When the Indicators Provide No Help EMP Link V will not function Point If an abnormality remains after checking the results of the above inspections, disconnect the Power Plug from the socket and consult with your dealer. Are the connection settings correct? Select a COM port number that is not being used by a printer or modem. Have the cables been connected correctly?Were the connections established with the power supply switched off? Is the signal extension cord too long?Did installation...