Epson Projector Emp 8100 User Manual

 P in P Function - 59
P in P Function
The video image will be displayed as a sub-screen inside the computer image or video image.
1Press the [P in P] button.
Operation instructions will be displayed at the bottom left-hand side of the sub-screen sit-
uated at the top right-hand side of the main screen.
2Press the [Enter] button on the remote control to move the position of the sub-screen.
3Press the [E-Zoom] button to change the size of the sub-screen.
4Press the [1] button to switch across to sub-screen...

60 - Volume Adjustment
Volume Adjustment
The volume can be amended when sound is emitted from the projector speakers.
1Press the [Volume+, -] button while pressing the [Shift] button([Volume+, -]button on 
the remote control).
Point
Adjustment is not possible when no sound signals are being input.
Power
Video
Computer
A/V mute
Resize
EscHelpMenu
ShiftKeystoneVolume
Keystone
VolumeSync.
Sync.TrackingTrackingShift
EscMenu
Comp1
P in P PresetVideoHelp
- Volume +
- Volume +Comp2/YCbCr
AutoResize 

 Menu Configuration - 61
Menu Configuration
The setup menu enables the various adjustments and settings to be made.
Menu items
The menus are split into top menus and sub menus and consist of a hierarchy structure. Also, 
the image menu will differ in accordance with the input source (connected port).

  Menu items
Point
·The items displayed on the image menu will differ in accordance with the projected input 
source, and menus other than that belonging to the projected input source cannot be 
adjusted....

62 - Menu Configuration
Point
The lamp illumination time is displayed in units of 0H between 0 and 10 hours, and, in units 
of 1 hour above 10 hours.
Sound menu Effect menu
Setup menu  Capture menu
Advance settings menu Information menu
The information menu displays the setup status of 
the projected input source
All reset menu
Volume
Treble
Bass
SRS SPACE
SRS CENTER
ResetExecute :
:
:
:
:0
0
0
0
0 Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter
1 Cursor/Stamp
2 Box
3...

 Menu Operations - 63
Menu Operations
The menus can be operated from both the projector and the remote control unit.
Operation method
1Press the [Menu] button.
The top menu will be displayed.
2Select the required item.
Press the [Sync +, -] button on the projector (lower the [Enter] button up or down on the 
remote control unit) to select the required item.
3Set the selected item.
Press the [ (Enter)] button on the projector (the [Enter] button on the remote control 
unit) to set the selected item.
The...

64 - Menu Operations
5Select the parameter value.
Press the [Tracking +, -] button on the projector (lower the [Enter] button left or right on 
the remote control unit) to select the parameter value.
Point
·(Enter) is attached to the rear of the sub item names that execute the parameters and 
continue onto the lower hierarchies. Press the [Enter] button to set this selection, and 
then select the parameter setting again.
·Refer to the list of settings for further information on the function of each...

 Menu Operations - 65
Setting items
To p  
MenuSub MenuFunctionDefault Value
Video Position Moves the image’s display position up, down, left and right.
Press the [Enter] button to make the required adjustments on 
the adjustment screen displayed.Center value
Tracking Adjusts vertical stripes that appear on the Computer image. Depends on the 
connection 
signals
Sync. Adjusts disturbance, blurring and vertical noise that appears 
on the Computer image.
·Disturbance and blurring may occur as a result of...

66 - Menu Operations
Video Video Signal Sets the video signal method.
Press the [Enter] button and select the required setting from 
the video signal method selection menu displayed.
·The video signal method will be automatically set up in the 
[Auto] mode, but do not use the [Auto] mode for the PAL 
system (60Hz).Auto
Reset Returns all image menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return...

 Menu Operations - 67
Effect Bar Sets the color, direction and width of the bar allocated to the 
[4] button.
Press the [Enter] button and select the required item from the 
bar setup menu. The color, direction and width can be 
selected independently for each of the settings between 1 
and 3.
·The [4] button executes the bar function. The bar types will 
be switched between 1 and 3 sequentially for each time the 
[4] button is pressed. (see page 58
)Individual
settings 
between types 
1 to 3
Cursor...

68 - Menu Operations
Setting DPMS Sets the energy-saving function for when no image signals 
are being input. When this is set at [ON], projection will be 
automatically ended and the projector will enter the sleep 
mode if no image signals are input and no operations are 
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.ON
Reset Returns all setting menu adjustment values to the default 
values.
Press the...