Epson Projector Emp 810 User Manual
Here you can view all the pages of manual Epson Projector Emp 810 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
49
Adjusting the Volume
You can adjust the volume for the sound from the projectors internal speaker or
from the external speakers that are connected to the projector.
Procedure
Press the [Volume , ] button on
either the remote control or the
projectors control panel.
When the button is pressed to [ ], the
volume increases, and when the button is
pressed to [ ], the volume decreases. The
volume gauge appears on the screen when the
volume has been adjusted.
Tip :
When the sound is being output to...](http://img.usermanuals.tech/thumb/23/89696/w300_epson-emp-810-manual_d-50.png "Page 51
49
Adjusting the Volume
You can adjust the volume for the sound from the projectors internal speaker or
from the external speakers that are connected to the projector.
Procedure
Press the [Volume , ] button on
either the remote control or the
projectors control panel.
When the button is pressed to [ ], the
volume increases, and when the button is
pressed to [ ], the volume decreases. The
volume gauge appears on the screen when the
volume has been adjusted.
Tip :
When the sound is being output to...")
49 Adjusting the Volume You can adjust the volume for the sound from the projectors internal speaker or from the external speakers that are connected to the projector. Procedure Press the [Volume , ] button on either the remote control or the projectors control panel. When the button is pressed to [ ], the volume increases, and when the button is pressed to [ ], the volume decreases. The volume gauge appears on the screen when the volume has been adjusted. Tip : When the sound is being output to...
Page 52
Page 53
51 Advanced Operations This chapter describes functions for enhancing the projection of images, and how to use the setting menus. Functions for Enhancing Projection ...............................52 List of Functions................................................................................... 52 Function Details ................................................................................... 52 A/V Mute...
Page 54
52 Functions for Enhancing Projection This section describes the various useful functions that can be used to enhance projection. List of Functions The following functions are available for enhancing projection. Function Details Detailed descriptions of the above functions are given below. This function momentarily pauses the image and sound. For example, it can be used when you do not want to show viewers details of operations such as selecting different files while computer images are being...
Page 55
![Page 55
53
Procedure
Press the [A/V Mute] button on either
the remote control or the projectors
control panel.
The image and sound will then be paused.
Press the [A/V Mute] button on either the
remote control or the projectors control panel
to continue normal projection.
You can use the [A/V Mute] function in the [Setting] menu to set the screen
appearance when the images and sound have been paused to any one of the
following three settings. (P.69)
Tip :
The default users logo is the EPSON logo. You can...](http://img.usermanuals.tech/thumb/23/89696/w300_epson-emp-810-manual_d-54.png "Page 55
53
Procedure
Press the [A/V Mute] button on either
the remote control or the projectors
control panel.
The image and sound will then be paused.
Press the [A/V Mute] button on either the
remote control or the projectors control panel
to continue normal projection.
You can use the [A/V Mute] function in the [Setting] menu to set the screen
appearance when the images and sound have been paused to any one of the
following three settings. (P.69)
Tip :
The default users logo is the EPSON logo. You can...")
53 Procedure Press the [A/V Mute] button on either the remote control or the projectors control panel. The image and sound will then be paused. Press the [A/V Mute] button on either the remote control or the projectors control panel to continue normal projection. You can use the [A/V Mute] function in the [Setting] menu to set the screen appearance when the images and sound have been paused to any one of the following three settings. (P.69) Tip : The default users logo is the EPSON logo. You can...
Page 56
![Page 56
54
This function pauses only the projected images. The sound keeps playing
without pausing.
Furthermore, the image will continue to be played back by the source.
Procedure
Press the [Freeze] button on the
remote control.
The images will then be paused.
To continue projecting the images, either press
the [Freeze] button again or press the [Esc]
button.
Tip :
Pressing the [Freeze] button also clears menu displays, effects functions and help
messages.
If you press the [Freeze] button while using...](http://img.usermanuals.tech/thumb/23/89696/w300_epson-emp-810-manual_d-55.png "Page 56
54
This function pauses only the projected images. The sound keeps playing
without pausing.
Furthermore, the image will continue to be played back by the source.
Procedure
Press the [Freeze] button on the
remote control.
The images will then be paused.
To continue projecting the images, either press
the [Freeze] button again or press the [Esc]
button.
Tip :
Pressing the [Freeze] button also clears menu displays, effects functions and help
messages.
If you press the [Freeze] button while using...")
54 This function pauses only the projected images. The sound keeps playing without pausing. Furthermore, the image will continue to be played back by the source. Procedure Press the [Freeze] button on the remote control. The images will then be paused. To continue projecting the images, either press the [Freeze] button again or press the [Esc] button. Tip : Pressing the [Freeze] button also clears menu displays, effects functions and help messages. If you press the [Freeze] button while using...
Page 57
![Page 57
55
This function changes the aspect ratio of video images from 4:3 to 16:9 when
video images are being projected. Images which have been recorded in digital
video or onto DVDs can be viewed in 16:9 wide-screen format. In the case of
HDTV
, the central part of the image can be displayed in the whole of the
screen.
Procedure
Press the [Resize] button on either the
remote control or the projectors control
panel. The image size will change each
time the button is pressed.
For SDTV
For HDTV
Changing...](http://img.usermanuals.tech/thumb/23/89696/w300_epson-emp-810-manual_d-56.png "Page 57
55
This function changes the aspect ratio of video images from 4:3 to 16:9 when
video images are being projected. Images which have been recorded in digital
video or onto DVDs can be viewed in 16:9 wide-screen format. In the case of
HDTV
, the central part of the image can be displayed in the whole of the
screen.
Procedure
Press the [Resize] button on either the
remote control or the projectors control
panel. The image size will change each
time the button is pressed.
For SDTV
For HDTV
Changing...")
55 This function changes the aspect ratio of video images from 4:3 to 16:9 when video images are being projected. Images which have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. In the case of HDTV , the central part of the image can be displayed in the whole of the screen. Procedure Press the [Resize] button on either the remote control or the projectors control panel. The image size will change each time the button is pressed. For SDTV For HDTV Changing...
Page 58
![Page 58
56
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom] button on the
remote control.
A cursor (cross) indicating the center
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Tilt the button on the remote control
to move the cross.
3When the [E-Zoom] button is pressed to ( ), the image is
enlarged with the cross as its center. When it is...](http://img.usermanuals.tech/thumb/23/89696/w300_epson-emp-810-manual_d-57.png "Page 58
56
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom] button on the
remote control.
A cursor (cross) indicating the center
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Tilt the button on the remote control
to move the cross.
3When the [E-Zoom] button is pressed to ( ), the image is
enlarged with the cross as its center. When it is...")
56 This function lets you enlarge and reduce a part of projected images such as graphs and tables. Procedure 1Press the [E-Zoom] button on the remote control. A cursor (cross) indicating the center point for the area to be enlarged will appear on the screen. 2Move the cross to the area of the image that is to be enlarged or reduced. Tilt the button on the remote control to move the cross. 3When the [E-Zoom] button is pressed to ( ), the image is enlarged with the cross as its center. When it is...
Page 59
57 Tip : The selected area can be enlarged to between 1 – 4 times, in 25 steps of x 0.125. If a sub-screen has been set using the P in P function, the enlargement function is applied to both the main screen and the sub-screen. Effect functions cannot be carried out while the E-Zoom function is being used. Furthermore, keystone correction, tracking adjustment and sync adjustment cannot be carried out using the projector’s control panel buttons. If the E-Zoom function is used while the keystone...
Page 60
![Page 60
58
The [1], [2] and [3] buttons on the remote control can be used to add display
effects to images that are being projected during a presentation. This can be
used to emphasize particular parts of the images.
Procedure
1Press the [1], [2] or [3] button on
the remote control to select the
type of effect.
The following icon or bar appears at the
center of the projected image.
[1]: Pointer icon
[2]: Spotlight
[3]: Bar
2Select the type of pointer icon or bar.
The pointer icon changes in the following...](http://img.usermanuals.tech/thumb/23/89696/w300_epson-emp-810-manual_d-59.png "Page 60
58
The [1], [2] and [3] buttons on the remote control can be used to add display
effects to images that are being projected during a presentation. This can be
used to emphasize particular parts of the images.
Procedure
1Press the [1], [2] or [3] button on
the remote control to select the
type of effect.
The following icon or bar appears at the
center of the projected image.
[1]: Pointer icon
[2]: Spotlight
[3]: Bar
2Select the type of pointer icon or bar.
The pointer icon changes in the following...")
58 The [1], [2] and [3] buttons on the remote control can be used to add display effects to images that are being projected during a presentation. This can be used to emphasize particular parts of the images. Procedure 1Press the [1], [2] or [3] button on the remote control to select the type of effect. The following icon or bar appears at the center of the projected image. [1]: Pointer icon [2]: Spotlight [3]: Bar 2Select the type of pointer icon or bar. The pointer icon changes in the following...