Epson Projector Emp 8000nl User Manual

        
60
Storing a User Logo
Follow these steps to capture and store a logo:
1. Display the image(with the projector) you wish to use as a 
logo.
2. Press the Menu button to open the Menu window.
3. Select the User’s Logo menu option by pressing the down 
arrow button on the operation panel or the pointer button 
on the remote control. Then press the Enter button to 
display the User’s Logo Setting window.
4. The message, “Do you use the present image as a user 
logo?” appears on the screen....

Menu Options
          
61
9. When the message “Saving the user logo is completed” 
appears on the screen, press the Menu or Enter button to 
display the Main Menu.
Assigning the Logo to the A/V Mute Button
Follow these steps to assign the logo to the A/V Mute 
button:
1. Press the Menu button to open the Menu window.
2. Select the Setting menu and press the Enter button.
3. Select the Blank option (A/V Mute), then highlight User 
Logo.
4. Press the Menu button twice.
Now you can press the A/V Mute...

        
62Startup Screen Displays the user logo during the warm-up after the 
projector is turned on.
Color Matching Adjusts the whiteness and blackness of the screen. 
Increasing the values emphasizes the whiteness and 
blackness.
Decreasing the values weakens the whiteness and 
blackness.
Video Signal Specifies the input image signal mode. User can 
select from AUTO, NTSC, NTSC 4.43, NTSC50, PAL, 
M•PAL, N•PAL, PAL60 and SECAM.
Rear Projection Mirrors the projected image so it looks correct when...

Menu Options
          
63
About Menu
The About menu displays the following information about 
your projector.
Image source = Computer or Component Video
Image source = Video
Menu item Description
Lamp Displays the number of hours the current lamp has 
been used. The lamp light turns red when the projector 
lamp is near the end of its normal life. When this 
happens, replace the projector lamp with a new one as 
soon as possible.
Frequency Displays the horizontal and vertical frequency of the...

        
64 

                                                                           
          
65
4
Using the ELP Link IV 
Software
The ELP Link IV Software is a utility you can run from your 
desktop or laptop computer to control projector features and 
draw special graphics on your screen. You can also use the 
software to reconfigure the special effect buttons on the 
remote control. 

        
66
Presentation support function
The presentation support function allows you to perform real-
time presentation effectively by a remote control shipped with 
the projector. 
Projector setting function 
The projector setting function allows you to control the 
projector from your  computer. 
♦Note: See the ELP Link IV demonstration included in the 
Projector Software CD-ROM. 
System requirements
To use the ELP Link IV utility and to look at the PDF User’s 
Guide, the following system...

System requirements
          
67
Using a PC
•IBM compatible PC with Pentium or higher processor 
•Microsoft Windows 95/98 or Windows NT 4.0
•At least 16MB of RAM for ELP Link IV to work (16MB to 
be added for Acrobat Reader to work)
•At least 6MB of free hard disk space for ELP Link IV 
installation (8MB to be added for Acrobat Reader and 3MB 
for User’s Guide installation)
•Double-speed CD-ROM drive (Quad-speed or faster 
recommended)
•VGA or better monitor
Using a Macintosh
•68000 series or...

        
68
Projector Software CD-ROM
The following software is enclosed. 
ELP Link IV utility
Offers a lot of advantages to your presentation in using a 
cursor, bar, or stamps with the remote control shipped with 
your projector. And you can control the brightness and size of 
the screen, and the sound from your computer. 
ELP Link IV User’s Guide
Provides you with detailed information and instructions to 
use ELP Link IV. The User’s Guide is provided in a PDF 
(Portable Document Format) file. To...

Connecting the Cables
          
69
Connecting the Cables
When you are using the following EPSON projector, follow 
the instructions below. If not, please see the User’s Guide 
packed with your projector. 
♦Caution: Before connecting the cables to your computer, make 
sure that the computer and projector are turned off and 
unplugged from any power source; otherwise damage may occur. 
Connecting to your PC
Using the PS/2 mouse
connect to the
PS/2 mouse portconnect to the 
serial port
PC serial...