Epson Projector Emp 8000nl User Manual

 
Contents 
         
vi 

 
  
  

 
    
   
 
        
  
 
      
 
   
    
 
     
 
      
 
      
    
  

 
    
  
 
      

 
      
 
       

 
       
 
       

 
          

 
vii 
Introduction 
Y 
our compact, lightweight EPSON EMP-9000/9000NL/
8000/8000NL projector lets you project full-color images 
and video onto a large screen for presentations. You can 
connect it simultaneously to two image sources: one PC or 
Apple® Macintosh® computer image sources, plus one video 
source such as a...

 
Introduction 
         
viii 
Your projector features the newest resizing technology DAR 
(Digital Active Resizing) which supports the true XGA (EMP-
8000/8000NL) and SXGA (EMP-9000/9000NL) computer  
output, as well as VGA, SXGA (EMP-9000/9000NL) output 
and SVGA, XGA (EMP-8000/8000NL) output. No matter 
what type of computer output is used, the result is a full-size 
video image of outstanding clarity.
The EMP-9000/9000NL/8000/8000NL projector supports 
IBM compatible PCs and laptops, as well as...

 
Getting the Most Out of Your Projector 
          

 
ix 
Getting the Most Out of Your Projector
Your projector comes with a full set of features that enable 
you to control the settings for the image display, video and 
audio. To get the most out of your projector, read this section 
for a quick summary of the important features.
Remote control
The buttons on the remote control enable you to turn the 
projector on and off, and provide direct access to blank, 
freeze, volume, mute and image...

Introduction
        
x
•Hard Travel Case ELPKS15
•Long Throw Zoom Lens ELPLL02
•Portable Screen ELPSC06
•VGA-Computer Cable (1.8m) ELPKC02
•VGA-Computer Cable (3.0m) ELPKC09
•VGA-Computer Cable (1.8m) ELPKC11
•Work Station Cable (5BNC/13W3) ELPKC12
•Work Station Cable (5BNC/5BNC) ELPKC13
•Work Station Cable (HD15/EVC) ELPKC14
•Work Station Cable (5BNC/EVC) ELPKC15
•Wide Zoom Lens ELPLW01
•Rear Projection Wide Lens ELPLR01
•Remote Control Receiver ELPST02
You can purchase these accessories from your...

About This Manual
          
xi
About This Manual
Chapter 1, “Installation”, gives step-by-step instructions on 
how to set up the projector and connect it to your computer, 
video source, or other external speaker or PA system. Read 
the installation procedures that apply to your configuration.
Chapter 2, “Using the Projector”, describes how to switch 
the projector on/off and control simple projector settings 
using the remote control or the operation panel.
Chapter 3, “Using the Menus”,...

Introduction
        
xii
Safety Instructions
Follow these safety instructions when setting up and using the 
projector:
1. Do not place the projector on an unstable cart, stand, or 
table.
2. Do not use the projector near water or sources of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the projector. 
If you are not sure of the power available, consult your 
dealer or local electricity company.
5. Place the projector near a wall outlet where the plug can...

Safety Instructions
          
xiii
11. Do not block the slots and openings in the projector case. 
They provide ventilation and prevent the projector from 
overheating. Do not place the projector on a sofa, rug or 
other soft surface, or in a closed-in cabinet unless proper 
ventilation is provided.
12. Never push objects of any kind through cabinet slots. 
Never spill liquid of any kind into the projector.
13. Except as specifically explained in this User’s Guide, do 
not attempt to service this...

Introduction
        
xiv
Where to Get Help
If you are having trouble setting up or running your 
projector, first see Chapter 6, “Troubleshooting”. If you 
cannot resolve the problem, contact the appropriate 
representative listed in the section entitled “After sales service 
contact addresses” at the end of this manual.
Before you call, please have the following information ready:
•Product name
•Product serial number
•Computer configuration
•Description of the problem
World Wide Web site
If you...

Where to Get Help
          
xv
Transporting your projector
The projector contains many glass parts and precision parts. If 
you need to transport it, please follow these packing 
guidelines to prevent damaging the projector:
•When shipping the projector for repairs, use the original 
packaging material. 
If you don’t have the original packaging, use equivalent 
materials, placing plenty of cushioning around the 
projector.
•When transporting the projector for business use, first put 
the projector...