Epson Projector Emp 755 User Manual

60
Using the Configuration Menu Functions User’s Guide
 The  Tracking
g,  Sync.
g, Position and Resize 
settings can not be adjusted  if no signals are being input.
 The items displayed in  the Signal menu change 
depending on the input signal  that is being projected.
Menu commands that do not apply to the current input 
signal cannot be adjusted.
 If using the EMP-765/755, you cannot change any of the  Signal configuration menu  settings while EasyMP is 
running.
Computer/RGB videoSignal Menu...

61
Using the Configuration Menu Functions User’s Guide
Component video
g
Composite videog / S-Video
g
Sub-menu
Function
Default
Position
Moves the image display position  vertically and horizontally.
 Press the [Enter] button on the remote control or on the  projectors control panel and then make the adjustment 
using the display position adju stment screen that appears.
Depends on 
connection
Progressive
(Adjustment is only possible when composite Video or S-
Video signals are being input.)
OFF: IP...

62
Using the Configuration Menu Functions User’s Guide
Setting Menu
Sub-menu
Function
Default
Keystone
Corrects vertical keystone distortion in images.
 When keystone correction is  carried out, the projected 
image will become smaller.
 If the text part of the image is blurred after keystone  correction is carried out,  decrease the sharpness setting.
Median value 
(0)
Auto 
Keystone
Sets the function for automati cally detecting the projector 
angle and correcting keystone ON or OFF when the...

63
Using the Configuration Menu Functions User’s Guide
EasyMP 
Audio Out
(EMP-765/755 only. Can be used
 only when projecting using 
EasyMP.)
Select the way to output sound when projecting using 
EasyMP.
Select the External to out put the sound from external 
speakers with built-in amplifie rs. Select the Internal to 
output the sound from the projectors built-in speaker. 
s p.28
*The audio output to an external speaker is possible only  when the audio data of scenari os (.wav) or that of MPEG 
files...

64
Using the Configuration Menu Functions User’s Guide
 The User’s Logo setting can  not be adjusted if no 
signals are being input.
Extended Menu
Sub-menu
Function
Default
Display
This lets you make settings rela ted to the projectors display.
Message: Sets whether display of the following messages is turned 
ON or OFF.
  Signal name when the video signal is switched
  Colour mode name when th e colour mode is switched
  When no image signals are being input
  When an incompatible signal is input...

65
Using the Configuration Menu Functions User’s Guide
Projection
Sets the projection position for the projector.
 Front : Select when the proj ector is in front of the 
screen.
 Front/Ceiling : Select when the  projector is in front of the 
screen and suspended from the ceiling.
 Rear : Select when the  projector is behind the 
screen.
 Rear/Ceiling : Select when  the projector is behind the 
screen and suspended from the ceiling.
* If the projection method has be en set to Front/Ceiling or...

66
Using the Configuration Menu Functions User’s Guide
Sub-menu
Function
Default
Standby 
Mode
(EMP-765/755 only)
Set to Network ON to use 
network monitoring and control 
functions and the standby monitor out function while the 
projector is in standby mode.
To enable the new settings, turn  the projectors power off and 
then turn it back on again.
* When set to Network ON, the Power indicator will flash  orange and then remain orange after disconnecting the 
power plug and reinserting it  into the...

67
Using the Configuration Menu Functions User’s Guide
 The Info menu shows the setting details for the current  image source.
 The Lamp Hours item a ppears as 0H for 0–10 hours, 
and after that, it appears in units of 1 hour.
Computer/RGB Video/ Component video
g
Composite video
g/ S-Video
g
Info Menu
Sub-menu
Function
Default
Lamp 
Hours
Displays the cumulative lamp operating time for both 
High Brightness a nd Low Brightness.
 When the lamp warning period is reached, the display  characters appear...

68
Using the Configuration Menu Functions User’s Guide
Reset Menu
Sub-menu
Function
Default
Reset All
Resets all items in all menus
 to their default settings.
 Press the [Enter] button on the remote control or on the  projectors control panel.
 To reset settings such as Image  or Signal, select Reset 
from the respective sub menus.
 The Computer Input, Vid eo Signal, User’s Logo, 
Lamp Hours and Language set tings will not be reset to 
their defaults. However, if Background Color is set to 
Logo or...

69
Using the Configuration Menu Functions User’s GuideUsing the Configuration Menus
The configuration menus ca
n be operated using either the remote control or 
the projectors control panel.PROCEDURE
Press the [Menu] button.
The configuration menu appears.Select a menu item.
Tilt the [ ] button on the remote  control up and down or press 
the [ ] and [ ] buttons on the projectors control panel to 
move to the item to be set.
Confirm the selection.
Press the [Enter] button to confir m the selection of a...