Epson Projector Emp 750 User Manual

							
User’s Guide 
						

							
1
User’s Guide
Projector FeaturesThe following six preset colour modes are provided so that you can easily 
obtain optimum images simply  by selecting a Colour mode.
In addition, if projecting onto blackboard s rather than projection screens in 
places such as schools, you can select  the Blackboard setting to allow 
images to be projected  in their natural tints.
s p.47 , p.56 , p.58
• Dynamic   Presentation  Theatre
 Living Room    sRGB
g Blackboard
The projector is compact B5 size (19.3 (D)  × 27.6 (W)  × 7 (H) cm) and 
lightweight (EMP-765/755 : approx.  1.8 kg, EMP-760/750 : approx. 1.7 kg). 
Easy to carry it with the included So ft carrying case which has a pocket to 
put cables and  other accessories.
Despite its compact size, the projector  can display images at high resolutions 
with a high degree of luminance, provid ing beautifully clear images even in 
bright environments. The brightness of the lamp can be set to one of two settings. 
Fine and clear images can be obtaine
d even in a bright room like a 
conference room and a classroom.
If projecting images in a dark room or  onto a small screen and the images are 
too bright, change the setting to Low.
The advantages of the Low setting are
 Reduction in power consumption of approximately 20%
 Reduction in operating noise of approximately 12%
 Approximately 1.5 times longer lamp life
s p.62
The vertical angle of the projector is de tected, so that any vertical keystone 
distortion in the projected images  can be automatically corrected. sp.41
Automatically detects images input fr om connected equipment. You can 
switch between the images with  just a single touch of a button. sp.37
Colour mode function
Presentation
Blackboard
Living Room
Compact and lightweightBrilliant, attractive images
Brightness ControlAutomatic keystone correction functionEasy Selection of Projection Images 
						

							2
Projector FeaturesUser’s Guide
The accessory remote control can be used to carry out operations such as 
pausing projection (Freeze function sp.51), zooming in on important parts 
of images (E-Zoom function sp.52) and pointing out important parts of 
images using a pointer icon (Pointer function sp.53).
In addition, the remote control can be used to move the pointer around on the 
computer screen during projection (Wireless Mouse Function sp.22). 
The direct power on function means you can turn the projector on simply by 
plugging the power cable into the electrical outlet. 
s
p.65
Also, with the instant-off function you can finish quickly by unplugging the 
power cable immediately after use. 
This function locks the buttons on the projectors control panel.
This function is useful at times such as during shows and exhibitions, or in 
places such as schools to limit the range of buttons that can be used. sp.54Password protection function allows you to limit the use of the projector. 
This means that the projector cannot be used if it is taken without 
authorisation, and thus serves as a theft-prevention feature. sp.31
Easy to OperateDirect Power On & Instant OffOperation Lock
Password protect function assists administration 
and theft prevention
[XXXXXXX] XX
XX
 XX
X XX
X
XX
.#XX
XX
 X
X XXX
 XXXX
 XX
XX
 XX
X XX.[0-9]:XXXX 
						

							
3
Projector FeaturesUser’s Guide
(EMP-765/755 only)
When something goes wrong with the projector, such as a lamp blowing 
during projection, the projector can  notify you of the error via e-mail.
In addition, by using EasyMP…
 Make easy network  connection with a computer 
via a wireless LAN.
 Project a computers image over a network.
s For instructions on how to use EasyMP, refer to  EasyMP Network Setup 
Guide and  EasyMP Operation Guide .
(EMP-765/755 only)
Presentations can be given smoothly,  and if other computers are connected 
while the presentation is being given, th ey do not cause any interruptions to 
the presentation at all.  sInterrupt Disabled  in the EasyMP Operation 
Guide
In addition, when the projector is se t to presentation mode, only images from 
PowerPoint slideshows can be projected.  sPresentation Mode  in the 
EasyMP Operation Guide
Because of this, the presentations can  appear more professional, with none 
of the preparation for the presentation  being visible to the viewers of the 
presentation. (EMP-765/755 only)
As well as a USB-compatible digita
l camera, you can use a USB-compatible 
hard disc and a USB-compatible memory device. This allows you to make a 
presentation without having a comput er connected to the projector. sp.29 , 
 Showing the Presentation (Using the CardPlayer)  in the EasyMP 
Operation GuideNetwork SupportSmooth, professional presentations
Large-volume USB Storage is Available to Use 
						

							
4
User’s Guide
Contents
Projector Features .................................................................. 1
Before Using the Projector
Part Names and Function s ..................................................... 7
Front/Top ................................... ................................................. 7
Control Panel ................... ........................................................... 8
Rear ............................................ ................................................. 9
Base ............................................ ............................................... 10
Remote Control ....... ............................................... ................... 11
Before Using the Remote  Control ........................................ 12
Inserting the Batterie s .................................. ............................. 12
Using the Remote Control and Remote Operating Range ........ 13
Installation ... .............................. ........................................... 15
Setting Up the Project or ............................................................ 15
Screen Size and Projectio n Distance......................................... 16
Inserting and Removing Card s (EMP-765/755 only) ............ 17
Installation........................ ......................................................... 17
Removal ..................................... ............................................... 18
Access Lamp Status ............................................... ................... 19
Connecting to a Computer ................................................... 20
Eligible Computers . ............................................... ................... 20
Projecting Images from a  Computer ......................................... 21
Using the Remote Control to Operate the Mouse Pointer 
(Wireless Mouse Func tion) ..................................................... 22
Connecting to a Video So urce.............................................. 24
Projecting Composite Vide o Images ........................................ 24
Projecting S-Video Im ages ....................................................... 25
Projecting Component Vide o Images ....................................... 25
Projecting RGB Video Im ages.................................................. 26
Playing Sound from Video  Equipment.................................. 27 Playing Sound from 
External Speakers 
(EMP-765/755 only) ... .................................... ...................... 28
Connecting USB Device s (Digital Camera, 
Hard Disk Drive or Memory Devi ces) (EMP-765/755 only) .. 29
Connecting USB Devi ces ..................................... ..................... 29
Disconnecting a USB Device  from the Projector...................... 30
Preventing theft (Passwor d Protect) .................................... 31
When Password Protect is  enabled............................................ 31
Setting Password Protect ........................................................... 32
Basic Operations
Turning the Projector On ...................................................... 35
Connecting the Power Ca ble ..................................................... 35
Turning the Power On and  Projecting Images .......................... 36
Turning the Projector Of f...................................................... 38
Adjusting the Screen Imag e ................................................. 40
Adjusting the Image Size  (Zoom Function) .............................. 40
Focusing the Screen Im age ....................................................... 40
Adjusting the Image Angle  and Automatic Keystone 
Correction Function ............................................ ..................... 41
Manually Correcting Keysto ne Distortion ................................ 43
Adjusting the Image Qua lity ................................................. 44
Adjusting Computer Images  and RGB Video Images .............. 44
Selecting the Projection Quality  (Colour Mode Selec tion)........................... ............................... 47
Adjusting the Volume . .................................... ...................... 48 
						

							
5
User’s Guide
Advanced Operations
Functions for Enhancing Projection...................................... 50
A/V Mute ................................... ............................................... 50
Freeze ......................................... ............................................... 51
Wide-screen Projection of Images from Video Equipment  (Changing the Aspect  Ratio) ................................................... 51
E-Zoom ...................................... ............................................... 52
Pointer function....... ............................................... ................... 53
Operation Button Lock  Function .............................................. 54
Using the Configuration Me nu Functions ............................. 55
List of Functions ..... ............................................... ................... 56
Using the Configuratio n Menus ................................................ 69
Troubleshooting
Using the Help ..................... ................................................. 73
Problems Solving ................ ................................................. 75
Reading the Indicato rs ................................. ............................. 75
When the Indicators Prov ide No Help...................................... 78
Appendices
Maintenance ........ .................................... ............................ 99
Cleaning ................................... ................................................. 99
Replacing Consumables . ......................................................... 100
Saving a Users Logo . .................................... .................... 105
Optional Accessories and  Consumables ........................... 108
Glossary ............... .............................. ................................ 109
List of ESC/VP21 Command s ............................................ 113
Command List ................. ........................................................ 113
USB connection............... ........................................................ 113
USB Connection Setup ......................................... ................... 114
List of Supported Monitor  Displays .................................... 115
Specifications ................... .................................................. 116
Appearance.......... .............................. ................................ 118 
						

							
Before Using the ProjectorThis chapter describes the procedures for setting up the projector before use.Part Names and Functions................................... 7
• Front/Top ............... ................................................................7
 Control Panel ......... ................................................................8
 Rear ........................ ................................................................9
 Base............... ........................................................................10
 Remote Control ..... ..............................................................11
Before Using the Remote Control ..................... 12
 Inserting the Batteries ........... .............................................12
 Using the Remote Contro l and Remote Operating 
Range ............... .....................................................................13 Using the Remote C ontrol ......................................................... 13
 Remote Operating Ra nge............................... ............................ 14
Installation ........................................................... 15
 Setting Up the Projector ........ .............................................15
 Screen Size and Projection Di stance..................................16
Inserting and Removing Cards 
(EMP-765/755 onl y) ............................................. 17
 Installation ............. ..............................................................17
 Removal.................. ..............................................................18
 Access Lamp Status ............................................ ................19 Card Slot Access Lamp  Status................................................... 19
 Wireless LAN Card Acces s Lamp Status .................................. 19
Connecting to a Computer................................. 20
 Eligible Computers ................ .............................................20  Projecting Images from a Co
mputer ................................ 21
 If the Monitor Port is a Mini  D-Sub 15-pin Port (Example) ......21 Using the Remote Control to  Operate the Mouse Pointer 
(Wireless Mouse Function) ...... .......................................... 22
Connecting to a Video Source ........................... 24
 Projecting Composite Video Im ages ................................. 24
 Projecting S-Video  Images ................................................. 25
 Projecting Component Video  Images ............................... 25
 Projecting RGB Video Images. .......................................... 26
Playing Sound from Video Equipment .............. 27
Playing Sound from External Speakers 
(EMP-765/755 only) ............................................. 28
Connecting USB Devices (Digital Camera, 
Hard Disk Drive or Memory Devices) 
(EMP-765/755 only) ............................................. 29
 Connecting USB Devices .......... .......................................... 29
 Disconnecting a USB Device fr om the Projector ............. 30
Preventing theft (Password Protect) ................. 31
 When Password Protect is enab led ................................... 31 When Power ON Protect is enabled (ON) ..............................31
 If the Timer Setting is for  One Hour or More .........................32
 When User’s Logo Protect is enabled (ON)............................32 Setting Password Protect ...... ............................................. 32 
						

							
7
User’s Guide
Part Names and FunctionsFront/Top
•Control panel sp.8
•Zoom ring  sp.40Adjusts the image size.
•Remote control light-receiving 
area  sp.13Receives signals from the remote control.•Power indicator  sp.75Flashes or lights in different colours to 
indicate the operating st atus of the projector.
•Front adjustable foot  sp.41Extend and retract to adjust the projection 
angle when the projector is placed on a 
surface such as a shelf.
•Lens coverAttach when not using the projector to 
prevent the lens from becoming dirty or 
damaged.
•Focus ring  sp.40Adjusts the image focus.•Foot adjust lever  sp.41Pull out the foot lever to extend and retract the 
front foot.
•Lamp indicator  sp.75Flashes or lights in different colours to 
indicate problems with the projection lamp.
•Air exhaust ventDo not touch during or immediately 
after projection, as it can become hot.
•Temperature indicator  sp.75Flashes or lights in different colours to 
indicate problems with the internal 
temperature of the projector.
•Card slot (EMP-765/755 only)  
s p.17Insert a LAN card or memory card in here 
when using EasyMP.
•Security lock ( )  sp.110 
						

							
8
Part Names and FunctionsUser’s GuideControl Panel•[Power] button 
s
p.36 , p.38Turns the projector power on or off.•[Help] button  sp.73Each time this button is pressed, it displays or 
hides the online help menu that can assist you 
if you have a problem.
•[Menu] button  sp.69Displays or hides the 
configuration menu.•[Esc] button  sp.23Stops the current function.
Displays the previous screen or 
menu while viewing a configuration 
menu. 
•[Source Search] button  sp.37The next input source is searched for 
automatically in the fo llowing order and the 
image input from the c onnected equipment is 
projected each time this  button is pressed. 
[Computer/Component Video] port
[S-Video] port
[Video] port
[EasyMP] (EMP-765/755 only)
•[] [] button  sp.42 , p.69 , p.73Press to correct keystone distortion.
If a configuration menu or help screen is 
displayed, it selects menu items and setting 
values.
•[ ] [ ] button  sp.48 , p.73Press to adjust the sound volume. If a 
configuration menu or help screen is displayed, 
it selects menu items and setting values.
•[Enter] button  sp.44 , 
p.69 , p.73Automatically adjusts analogue 
RGB images from computers and 
RGB video images to the optimum 
display.
If a configuration menu or help 
screen is displayed, it accepts the 
current selection and moves on to 
the next-lowest level. 
						

							
9
Part Names and FunctionsUser’s GuideRear•Remote control light-receiving 
area 
sp.13Receives signals from the remote control.•Power inlet  sp.35Connects to the power cable.
•[Computer/Component Video] port 
sp.21 , p.25 , p.26Input analogue RGB video signals from a computer 
and RGB video signals and  component video
g 
signals from other video sources.
•[Video] port  sp.24Inputs  composite video
g signals to the 
projector from other video sources.
•[S-Video] port  sp.25Inputs  S-Video
g signals to the projector 
from other video sources.
•[USB TypeB] port  sp.22 , p.113Connects the projector to a computer via the 
USB
g  cable when using the wireless mouse 
function.
This port cannot be used for receiving 
images from your computer via USB.
•Speaker
•[Audio] port  sp.27Input audio signals from connected equipment. When 
projecting using the CardPlayer function of EasyMP, 
this port can be used to output the audio signals to 
external speakers by setting EasyMP Audio Out. 
(EMP-765/755 only)
 s
p.63  
•Rear adjustable foot 
sp.42
•Rear adjustable foot•[USB TypeA] port 
(EMP-765/755 only)  sp.29Connects a digital camera or USB hard disc/
memory device to project image/movie files 
or scenarios from such media using the 
CardPlayer function of EasyMP.