Epson Projector Emp 737 User Manual

User’s Guide 

1
User’s Guide
Projector FeaturesThe following six preset colour modes are provided so that you can easily 
obtain optimum images simply by selecting a Colour mode.
In addition, if projecting onto blackboards rather than projection screens in 
places such as schools, you can select the Blackboard setting to allow 
images to be projected in their natural tints.
sp.47, p.56, p.58
• Dynamic   Presentation  Theatre
 Living Room   sRGB
g Blackboard
The projector is compact B5 size (19.3 (D) × 27.6 (W) ×...

2
Projector FeaturesUser’s Guide
The accessory remote control can be used to carry out operations such as 
pausing projection (Freeze function sp.51), zooming in on important parts 
of images (E-Zoom function sp.52) and pointing out important parts of 
images using a pointer icon (Pointer function sp.53).
In addition, the remote control can be used to move the pointer around on the 
computer screen during projection (Wireless Mouse Function sp.22). 
You can make the projector turn on and be ready to...

3
Projector FeaturesUser’s Guide
(EMP-745/737 only)
When something goes wrong with the projector, such as a lamp blowing 
during projection, the projector can notify you of the error via e-mail.
In addition, by using EasyMP…
 Make easy network 
connection with a computer 
via a wireless LAN.
 Project a computers image
over a network.
sFor instructions on how to use EasyMP, refer to EasyMP Network Setup 
Guide and EasyMP Operation Guide.
(EMP-745/737 only)
As well as a USB-compatible digital camera, you...

4
User’s Guide
Contents
Projector Features .................................................................. 1
Before Using the Projector
Part Names and Functions ..................................................... 7
Front/Top .................................................................................... 7
Control Panel .............................................................................. 8
Rear...

5
User’s Guide
Advanced Operations
Functions for Enhancing Projection...................................... 50
A/V Mute .................................................................................. 50
Freeze ........................................................................................ 51
Wide-screen Projection of Images from Video Equipment 
(Changing the Aspect Ratio) ................................................... 51
E-Zoom...

Before Using the ProjectorThis chapter describes the procedures for setting up the projector before use.Part Names and Functions................................... 7
• Front/Top ...............................................................................7
 Control Panel .........................................................................8
 Rear ........................................................................................9
...

7
User’s Guide
Part Names and FunctionsFront/Top
•Control panel s
p.8
•Zoom ring s
p.40Adjusts the image size.
•Remote control light-receiving 
area s
p.13Receives signals from the remote control.•Power indicator s
p.75Flashes or lights in different colours to 
indicate the operating status of the projector.
•Front adjustable foot s
p.41Extend and retract to adjust the projection 
angle when the projector is placed on a 
surface such as a shelf.
•Lens coverAttach when not using the projector to 
prevent...

8
Part Names and FunctionsUser’s GuideControl Panel•[Power] button 
s
p.36, p.38Turns the projector power on or off.•[Help] button s
p.73Each time this button is pressed, it displays or 
hides the online help menu that can assist you 
if you have a problem.
•[Menu] button s
p.69Displays or hides the 
configuration menu.•[Esc] button s
p.23Stops the current function.
Displays the previous screen or 
menu while viewing a configuration 
menu. 
•[Source Search] button s
p.37The next input source is searched...

9
Part Names and FunctionsUser’s GuideRear•Remote control light-receiving 
area s
p.13Receives signals from the remote control.•Power inlet s
p.35Connects to the power cable.
•[Computer/Component Video] port 
s
p.21, p.25, p.26Input analogue RGB video signals from a computer 
and RGB video signals and component video
g 
signals from other video sources.
•[Video] port s
p.24Inputs composite video
g signals to the 
projector from other video sources.
•[S-Video] port s
p.25Inputs S-Video
g signals to the...