Epson Projector Emp 730 User Manual
Here you can view all the pages of manual Epson Projector Emp 730 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
39
If vertical stripes appear in the projected
images, and this cannot be fixed using
automatic adjustment. You will need to adjust
the tracking
manually using the following
procedure.
Procedure
1Press the [Menu] button on the
remote control, and then select
Tracking from the Video
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.57)
2Press the [ ] and [ ] buttons
to set the tracking value.
The tracking value increases or
decreases each time a button is...](http://img.usermanuals.tech/thumb/23/89755/w300_epson-emp-730-manual_d-40.png "Page 41
39
If vertical stripes appear in the projected
images, and this cannot be fixed using
automatic adjustment. You will need to adjust
the tracking
manually using the following
procedure.
Procedure
1Press the [Menu] button on the
remote control, and then select
Tracking from the Video
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.57)
2Press the [ ] and [ ] buttons
to set the tracking value.
The tracking value increases or
decreases each time a button is...")
39 If vertical stripes appear in the projected images, and this cannot be fixed using automatic adjustment. You will need to adjust the tracking manually using the following procedure. Procedure 1Press the [Menu] button on the remote control, and then select Tracking from the Video menu. For details on this operation, refer to Using the Configuration Menus. (p.57) 2Press the [ ] and [ ] buttons to set the tracking value. The tracking value increases or decreases each time a button is...
Page 42
![Page 42
40
If flickering, fuzziness or interference appear
in images that are input from the computer,
and this cannot be fixed using automatic
adjustment, you will need to adjust the sync
manually using the following procedure.
Procedure
1Press the [Menu] button on the
remote control, and then select
Sync. from the Video
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.57)
2[Press the [ ] and [ ] buttons
to set the sync value.
The sync value increases or decreases
each...](http://img.usermanuals.tech/thumb/23/89755/w300_epson-emp-730-manual_d-41.png "Page 42
40
If flickering, fuzziness or interference appear
in images that are input from the computer,
and this cannot be fixed using automatic
adjustment, you will need to adjust the sync
manually using the following procedure.
Procedure
1Press the [Menu] button on the
remote control, and then select
Sync. from the Video
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.57)
2[Press the [ ] and [ ] buttons
to set the sync value.
The sync value increases or decreases
each...")
40 If flickering, fuzziness or interference appear in images that are input from the computer, and this cannot be fixed using automatic adjustment, you will need to adjust the sync manually using the following procedure. Procedure 1Press the [Menu] button on the remote control, and then select Sync. from the Video menu. For details on this operation, refer to Using the Configuration Menus. (p.57) 2[Press the [ ] and [ ] buttons to set the sync value. The sync value increases or decreases each...
Page 43
![Page 43
41
Selecting the Color Mode
The following six preset color modes are available for use depending on the
characteristics of the images that are being projected. You can easily obtain the
optimum image quality simply by selecting the color mode that corresponds to
the projected images. The brightness of the images will vary depending on
which color mode is selected.
Procedure
The color mode changes as follows
each time the [Color Mode] button on
the remote control is pressed.
Normal → Meeting →...](http://img.usermanuals.tech/thumb/23/89755/w300_epson-emp-730-manual_d-42.png "Page 43
41
Selecting the Color Mode
The following six preset color modes are available for use depending on the
characteristics of the images that are being projected. You can easily obtain the
optimum image quality simply by selecting the color mode that corresponds to
the projected images. The brightness of the images will vary depending on
which color mode is selected.
Procedure
The color mode changes as follows
each time the [Color Mode] button on
the remote control is pressed.
Normal → Meeting →...")
41 Selecting the Color Mode The following six preset color modes are available for use depending on the characteristics of the images that are being projected. You can easily obtain the optimum image quality simply by selecting the color mode that corresponds to the projected images. The brightness of the images will vary depending on which color mode is selected. Procedure The color mode changes as follows each time the [Color Mode] button on the remote control is pressed. Normal → Meeting →...
Page 44
Page 45
43 Advanced Operations This chapter describes functions for enhancing the projection of images, and how to use the configuration menus. Functions for Enhancing Projection ................................44 A/V Mute .............................................................................................. 44 Freeze .................................................................................................... 45 Wide-screen Projection of Component Video and Video Images (Changing the...
Page 46
44 Functions for Enhancing Projection This section describes the various useful functions that can be used to enhance presentations. A/V Mute This function momentarily pauses the image and sound. For example, it can be used when you do not want to show viewers details of operations such as selecting different files while computer images are being projected. However, if you use this function when projecting moving images, the images and sound will still continue to be played back by the source, and...
Page 47
![Page 47
45
Freeze
This function pauses only the projected images. The sound keeps playing
without pausing.
The image source will still be playing back the images even while projection is
paused, and so it will not be possible to resume projection from the point where
it was paused.
Procedure
Press the [Freeze] button on the
remote control.
The images will then be paused.
To continue projecting the images, either press
the [Freeze] button again or press the [Esc]
button.
Tip :
Pressing the [Freeze] button...](http://img.usermanuals.tech/thumb/23/89755/w300_epson-emp-730-manual_d-46.png "Page 47
45
Freeze
This function pauses only the projected images. The sound keeps playing
without pausing.
The image source will still be playing back the images even while projection is
paused, and so it will not be possible to resume projection from the point where
it was paused.
Procedure
Press the [Freeze] button on the
remote control.
The images will then be paused.
To continue projecting the images, either press
the [Freeze] button again or press the [Esc]
button.
Tip :
Pressing the [Freeze] button...")
45 Freeze This function pauses only the projected images. The sound keeps playing without pausing. The image source will still be playing back the images even while projection is paused, and so it will not be possible to resume projection from the point where it was paused. Procedure Press the [Freeze] button on the remote control. The images will then be paused. To continue projecting the images, either press the [Freeze] button again or press the [Esc] button. Tip : Pressing the [Freeze] button...
Page 48
![Page 48
46
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
Video) are being projected. Images which have been recorded in digital video
or onto DVDs can be viewed in 16:9 wide-screen format.
Procedure
1Press the [Menu] button on the
remote control, and then select
Aspect Ratio from the
Video menu.
For details on this operation,...](http://img.usermanuals.tech/thumb/23/89755/w300_epson-emp-730-manual_d-47.png "Page 48
46
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
Video) are being projected. Images which have been recorded in digital video
or onto DVDs can be viewed in 16:9 wide-screen format.
Procedure
1Press the [Menu] button on the
remote control, and then select
Aspect Ratio from the
Video menu.
For details on this operation,...")
46 Wide-screen Projection of Component Video and Video Images (Changing the Aspect Ratio) This function changes the aspect ratio of images from 4:3 to 16:9 when component video images (YCbCr and YPbPr) or video images (S-Video or Video) are being projected. Images which have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. Procedure 1Press the [Menu] button on the remote control, and then select Aspect Ratio from the Video menu. For details on this operation,...
Page 49
![Page 49
47
E-Zoom
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom ] button on the
remote control.
A cursor (cross) indicating the center
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Press the [ ], [ ], [ ] and [ ] buttons
on the remote control to move the cross.
3When [ ] is pressed, the image is
enlarged with the cross as its center....](http://img.usermanuals.tech/thumb/23/89755/w300_epson-emp-730-manual_d-48.png "Page 49
47
E-Zoom
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom ] button on the
remote control.
A cursor (cross) indicating the center
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Press the [ ], [ ], [ ] and [ ] buttons
on the remote control to move the cross.
3When [ ] is pressed, the image is
enlarged with the cross as its center....")
47 E-Zoom This function lets you enlarge and reduce a part of projected images such as graphs and tables. Procedure 1Press the [E-Zoom ] button on the remote control. A cursor (cross) indicating the center point for the area to be enlarged will appear on the screen. 2Move the cross to the area of the image that is to be enlarged or reduced. Press the [ ], [ ], [ ] and [ ] buttons on the remote control to move the cross. 3When [ ] is pressed, the image is enlarged with the cross as its center....
Page 50
48 Using the Configuration Menu Functions The configuration menus can be used to carry out a variety of settings and adjustments. The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus. The remote control is used to operate the menus. Refer to Using the Configuration Menus (p.57) for details on using the menus. List of Functions The functions in the Video menu apart from Input Signal and Auto Setup cannot be adjusted...