Epson Projector Emp 7200 User Manual

n  n  n  n  n  n
61
Using a PC
• IBM compatible PC with Pentium or higher processor 
• Microsoft Windows 95 or Windows NT 4.0, 3.51, or 
Windows 3.1
• At least 16MB of RAM for ELP Link III V2.0 to work
• 16MB to be added for Acrobat Reader to work)
• At least 2MB of free hard disk space for ELP Link III V2.0 
installation (8MB to be added for Acrobat Reader and 3MB 
for User’s Guide installation, 8MB for the ELP Link III 
V2.0 demonstration)
• Double-speed CD-ROM drive (Quad-speed or faster...

Using the Projector Software
  n  n  n  n
62
Projector Software CD-ROM
The following software is enclosed. 
ELP Link III V2.0 utility
Offers a lot of advantages to your presentation in using a 
cursor, bar, or stamps with the remote control shipped with 
your projector. And you can control the brightness and size of 
the screen, and the sound from your computer. 
ELP Link III V2.0 User’s Guide
Provides you with detailed information and instructions to 
use ELP Link III V2.0. The User’s Guide is provided...

Connecting the Cables
n  n  n  n  n  n
63
Connecting the Cables
When you are using the following EPSON projector, follow 
the instructions below. If not, please see the User’s Guide 
packed with your projector. 
¨
Caution: Before connecting the cables to your computer, make 
sure that the computer and projector are turned off and 
unplugged from any power source; otherwise damage may occur. 
Connecting to your PC
Using the PS/2 mouse
connect to the
PS/2 mouse portconnect to the 
serial port
PC serial...

Using the Projector Software
  n  n  n  n
64
Using the serial mouse
Connecting to your Macintosh
connect to the 
serial portconnect to the 
printer port or 
modem port
PC serial cable
PC serial mouse cable
connect to 
Mouse/Com 
connect to the 
ADB portconnect to the 
printer port or
modem port
Mac serial cable
Mac mouse cable
connect to 
Mouse/Com 

Installing the Projector Software on Your PC
n  n  n  n  n  n
65
Installing the Projector Software on 
Your PC
After connecting the projector to your PC, install the 
Windows-based projector software as described below. 
1. Turn on the computer and start Windows.
2. Insert the EPSON Projector Software CD-ROM into the 
CD-ROM drive. The following dialog box appears. 
¨
Note: If the dialog box does not appear, follow the steps below. 
For Windows 95 or NT 4.0 users:
Double-click the My Computer icon, then...

Using the Projector Software
  n  n  n  n
66
4. When you see the following dialog box, click the Install 
ELP Link III V2.0 button. 
5. When you see the following dialog box, select items you 
wish to install. Then click Install. 
6. The setup program starts the installation procedure for 
each software component. Follow the on-screen 
instructions.  
To view the ELP Link III V2.0 
demonstration, click the View 
Demonstration button.  

Installing the Projector Software on Your PC
n  n  n  n  n  n
67
Installing ELP Link III V2.0 on your PC
For Macintosh users:
ELP Link III V2.0 installs directly from the setup program 
main window; there is no separate installation program.
The ELP Link III V2.0 installation program starts with the 
following dialog box. Follow the steps below. 
¨
Note: The dialog boxes used here are for Windows 95. Dialog 
boxes may differ depending on your platform. 
1. Click Next. Then read the license agreement. If...

Using the Projector Software
  n  n  n  n
68
2. A dialog box appears. Read the information, then click 
Next. 
3. Choose a Destination Folder. Your software will be 
installed into this folder. Click Next.
4. Follow the on-screen instructions. When the installation is 
complete, click Finish.  

Installing the Projector Software on Your Macintosh
n  n  n  n  n  n
69
Installing the Projector Software on 
Your Macintosh
After connecting the projector to your Macintosh, install the 
Macintosh-based projector software as described below. 
1. Turn on your Macintosh, then insert the EPSON 
Projector Software CD-ROM in the CD-ROM drive. 
2. Double-click the Installer icon. The following dialog box 
appears.
3. Select language from the pop-up menu. Then click OK. 
4. When you see the following dialog...

Using the Projector Software
  n  n  n  n
70
5. Read the license agreement. If you agree with it, click 
Accept. 
6. The following dialog box appears. If you want to install all 
of the software components contained on your projector 
software CD-ROM, make sure the disk where you want to 
install the software is displayed in the Install Location box, 
then click Install.
¨
Note: If you are low on disk space, select Custom Install from 
the pop-up menu and select the software you want to install. 
7. The...