Epson Projector Emp 720 User Manual

49
Video Menu
* If set to sRGB, the color temperature for the Color Adjustment command in the Advanced menu will 
be set to 6500K.
Sub-menuFunctionDefault 
setting
Position Moves the image display position vertically and horizontally.
Press the [Enter] button and make the adjustment using the 
display position adjustment sub-menu that appears.Depends on 
connection
Tracking
Adjusts computer images when vertical stripes appear in the 
images.Depends on 
connection
Sync.
Adjusts computer images when...

50
Component (YCbCr, YPbPr)         Video (S-Video, Video)
Video Menu
Sub-menuFunctionDefault 
setting
Position Moves the image display position vertically and horizontally.
Press the [Enter] button and make the adjustment using the 
display position adjustment sub-menu that appears.Depends on 
connection
Brightness Adjusts the image brightness. Median value 
(0)
Contrast
Adjusts the difference between light and shade in the images. Median value 
(0)
Color (Not available for RGB-Video)
Adjusts the color...

51
* If set to sRGB, the color temperature for the Color Adjustment command in the Advanced menu will 
be set to 6500K
Tip :
The Audio menu settings are saved individually for each input signal source.
Video Signal  (Adjustment is only possible when Video/ S-Video signals are 
being input.) 
Sets the video signal format.
Press the [Enter] button, and choose the setting from the video 
signal format selection sub-menu which appears.
When set to Auto, the video signal format is set automatically.Auto...

52
Setting Menu
Sub-menuFunctionDefault 
setting
Keystone Corrects vertical keystone distortion in images.
When keystone correction is carried out, the projected image 
will become smaller.
If the images become uneven in appearance after keystone 
correction is carried out, decrease the sharpness setting.Median value 
(0)
Auto Keystone Sets the function for automatically correcting keystone distortion 
when the angle of the projector has been adjusted to ON or OFF. 
This function is only enabled when...

53
Reset Resets all adjustment values for the Setting menu functions to 
their default settings.
Press the [Enter] button to display the confirmation screen, and 
select Yes.
Select Reset All to return all menu settings - including settings 
for the Video and Audio menus to their default settings. 
(p.56)-
Users Logo Menu
Sub-menuFunctionDefault 
setting
Execute Records a users logo. (p.82)
Press the [Enter] button and follow the procedure appearing on 
the screen.EPSON logo
Advanced Menu...

54
Startup Screen Sets whether the startup screen is displayed or not.
To change the users logo, you need to record and set your own 
logo.ON
Color Adjustment Adjusts the color temperature
 and intensity of each RGB color 
for each input source. 
Color Temp.: Lets you adjust bright colors within a range from 
reddish tinges to bluish tinges. 
If the color temperature is lower, colors appear 
reddish and color tones appear softer. 
If the color temperature is higher, colors appear 
bluish and color...

55
The About menu shows the setting details for the current image source.
The Lamp item appears as 0H for 0 - 10 hours, after that, it appears in units 
of 1 hour.
Computer/ RGB-Video/  Video (S-Video, Video)
Component Video
(Analog-RGB, YCbCr
, YPbPr)
About Menu
Sub-menuFunctionDefault 
setting
Lamp Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display characters 
appear in red.0H
Reset Lamp 
Ti me rInitializes the lamp operating time. When this command is...

56
Reset All Menu
Sub-menuFunctionDefault 
setting
Execute Resets all items in all menus to their default settings.
Press the [Enter] button to display the confirmation screen, and 
select Yes.
Select Reset in an individual menu to reset only the settings for 
the items in each sub-menu.
The Input Signal, Users Logo, Lamp and Language 
settings will not return to their default settings.-
Execute
: Select : Execute
Video
Audio
Setting
Users Logo
Advanced
About
Reset All
Using the Configuration Menu...

57
Using the Configuration Menus
The configuration menus can be operate using the remote control only.
Procedure
1Press the [Menu] button on the 
remote control.
The main menu will be displayed.
2Select a menu item.
Press the [ ] or [ ] button to move to an 
item to be selected.
3Confirm the selection.
Press the [Enter] button to confirm the 
selection of a menu item.
The selected sub-menu will then be 
displayed. 
4Select a sub-menu item.
Press the [ ] or [ ] button to move to an 
item to be selected....

58
5Select a setting value.
Press the [ ] and [ ] buttons to change 
the setting value.
For commands which have ON/ Off 
settings, use the [ ] and [ ] buttons to 
select the desired setting, and then press 
the [Enter] button.
Tip :
 Sub-menu items which cause another sub-menu to be displayed when they are selected 
have   after them. If you select such menu items and press the [Enter] button, you 
can then change the settings in the next sub-menu which appears.
 Refer to List of Functions for details...