Epson Projector Emp 703 Quickstart Guide

1-F   C   1-F   M   1-F   Y   1-F   BK
WARNINGNever look into the lens while
the projectors power is turned on.
Be sure to read the Owners Manual thoroughly before using this projector.
9001870
01.08-.1A(C01) Printed in Japan
EMP-713/703/503
QUICK REFERENCE GUIDE
Printed on 100% recycled paper. 

1-B   C   1-B   M   1-B   Y   1-B   BK
Setting UpAdjust the distance between the projector and
the screen until the desired image size is obtained.
* When installing to wall, leave a space of about
  7.87 inches (0.2m) between the projector and the wall.
Page 4 of Owners Manual
screen size
projection
distance
(7.7–9.2)
(11.5–13.8m) (3.8–4.5)
148.3–180.2
223.9–271.7
299.5–363.3
450.7–546.3 inches(3.0–3.6)
118.1–143.6(2.3–2.7) 87.8–107.0 (1.5–1.7) (1.1–1.3) (–1.1) –44.7
42.5–52.1
57.6–70.4
30
26 40 60 80...

2-F   C   2-F   M   2-F   Y   2-F   BK
Computer 
AudioIn OutS-Video
AudioR
L
Video
ConnectionsConnecting to a Computer
Connecting to a Video Source
* Turn off the power for both the projector and the other equipment before connecting them.
Computer cable (accessory)
A/V cable (accessory) To computers 
monitor port
 (video port)
To video output connector (yellow)
To audio output L connector (white)
To audio output R connector (red)
Video connector (yellow) Audio R connector (red)Audio L connector (white)...

2-B   C   2-B   M   2-B   Y   2-B   BK
12
Momentarily turning off images and sound
First press the             , select Settings and then A/V Mute. Then select the type of screen to be displayed 
when projection is being stopped. The following choices are available. The default setting is the black screen.
Projection of the images and sound will be restarted.
If you use this function while projecting moving images, the images and sound will still continue to be 
played back, and you cannot return to the...

3-F   C   3-F   M   3-F   Y   3-F   BK
If images do not appear ...
If you have other problems ...If a laptop computer or a computer with a 
LCD screen has been connected to the 
projector, you may need to change the 
output destination for video signals 
depending on the computer keys (        or 
        ) or the computers settings. The 
output destination can normally be 
changed by holding down the computers
           and pressing one of the Function 
keys.
Once the source has been changed, after 
a...

3-B   C   3-B   M   3-B   Y   3-B   BK
10
Enhancing presentation materialsEffect function
Page 51 of Owners Manual
Tip
Press      . Press        .
Press       .
Functions for 
Enhancing Projection
Press       .
Press         to erase the stamps, 
squares, markers and free lines set 
for decorative purposes.
Displays the pointer icon. Tilt the
       to move the icon, and then 
press       to stamp the pointer 
icon in position.Displays the square icon. Tilt the 
       to move the icon to the 
starting...

4-F   C   4-F   M   4-F   Y   4-F   BK
6
Automatically adjusting computer images to the 
optimum settings
Other adjustments
Remote Control
Using the on-screen menus
Remote Control
Main menu Remote control
Select
Move 
down
ReturnMove 
right Move 
leftMove 
up
Adjustment / 
Turning Off the Projector
Press           on the remote control to automatically adjust the tracking and the display position and 
synchronization.
Press         on the remote control to display the setting menu on the projection...

4-B   C   4-B   M   4-B   Y   4-B   BK
8
Turning Off 
the Projector
Press the   twice to turn off the 
projectors power.2
Turn off the power for the equipment connected 
to the projector.1
Check that      is lit steadily with an orange color, 
and then disconnect the power cord.3
If the power cord is disconnected while        is still flashing orange, it may cause problems with 
projector operation.
      will start flashing orange. (Cool-down in progress)
* Set the R/C switch on the remote control to...

4-B   C   4-B   M   4-B   Y   4-B   BK
8
Turning Off 
the Projector
Press the   twice to turn off the 
projectors power.2
Turn off the power for the equipment connected 
to the projector.1
Check that      is lit steadily with an orange color, 
and then disconnect the power cord.3
If the power cord is disconnected while        is still flashing orange, it may cause problems with 
projector operation.
      will start flashing orange. (Cool-down in progress)
* Set the R/C switch on the remote control to...

4-F   C   4-F   M   4-F   Y   4-F   BK
6
Automatically adjusting computer images to the 
optimum settings
Other adjustments
Remote Control
Using the on-screen menus
Remote Control
Main menu Remote control
Select
Move 
down
ReturnMove 
right Move 
leftMove 
up
Adjustment / 
Turning Off the Projector
Press           on the remote control to automatically adjust the tracking and the display position and 
synchronization.
Press         on the remote control to display the setting menu on the projection...