Epson Projector Emp 700 User Manual
Have a look at the manual Epson Projector Emp 700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Changing a Menu Setting n n n n n n 43 Changing a Menu Setting To change a menu setting: 1. Press the Menu button on the remote control to display the Main menu. 2. Press the top or bottom of the Enter button to scroll through the menu choices. 3. Press the Enter button to display a submenu. Power Freeze A/V MuteE-ZoomR/C ON OFF3 1524 Enter Esc Enter button Power Freeze A/V MuteE-ZoomR/C ON OFF3 1524 Enter Esc Enter button Power Freeze A/V MuteE-ZoomR/C ON OFF3 1524 Enter Esc
n n n n 44 As you select a menu, a sub menu of options appears to the right. ¨ Note: The options available in some submenus vary, depending on whether the current image source is the computer or a video source. 4. Press the top or bottom of the Enter button to scroll through the menu choices. 5. Press the right or left sides of the Enter button to change a setting on one of the submenus. 6. When you are finished changing settings, press the Menu button again to hide the menu, or press the Esc to go back to the Main menu. Your changes are saved automatically.
Menu Options n n n n n n 45 Menu Options Video Menu (Image source = Computer) The Video menu lets you make adjustments to the projected image. The following options are available when the image source is Computer. ¨ Note: The computer must be connected and operating, and the image source on the projector must be set to Computer for you to access these menu options. Menu item Description Position Select this item by pressing the Enter button to enter the screen position adjustment mode. Then use the Enter button to move the screen position in the corresponding direction. When you finish making adjustment, press the Esc button to return to the Video submenu. Tracking Matches the projector’s internal clock to various computer graphic signals. Adjust this setting to remove vertical lines from the image. Sync. Synchronizes with the tracking signal sent from the computer. Adjust this setting to correct fuzziness or screen flicker. Brightness Lightens or darkens the overall image. Increase brightness to lighten an image, or decrease it to darken the image. Contrast Adjusts the difference between light and dark areas. Increase the contrast to make light areas lighter and dark areas darker. Decrease it to minimize the difference between light and dark areas.
n n n n 46Color Adjusts the color balance (Red:Green:Blue) of the input source. Select this item by pressing the Enter button. The projector will enter color adjustment mode. Use the Enter button to select a color. Next, use the Enter button to adjust the selected color. Increase the color setting for more intense color, or decrease the setting for less intense color. Sharpness Adjusts the screen sharpness. Increase the sharpness for a sharper image, or decrease it for a less sharp image. Auto Setup Set to On to have the computer automatically optimize the image for projection. Gamma Adjusts the projected imagery for natural coloration. Reset Returns all menu items to their initial factory defaults. Select this item and then press the Enter button to display the confirmation screen. Next, select Yes and then press the Enter button to reset the menu. If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings. Menu item Description
Menu Options n n n n n n 47 Video Menu (Image source = Video) The Video menu lets you make adjustments to the projected image. The following options are available when the image source is Video. ¨ Note: The projector’s image source must be set to Video, and the video source (such as a VCR or camcorder) must be connected and operating for you to access these menu options (for example, the projector must actually be projecting an image from a video tape, if you’re using a VCR). Menu item Description Position Select this item by pressing the Enter button to enter the screen position adjustment mode. Then use the Enter button to move the screen position in the corresponding direction. When you finish making adjustment, press the Esc button to return to the Video submenu. Brightness Lightens or darkens the overall image. Increase brightness to lighten an image, or decrease it to darken the image. Contrast Adjusts the difference between light and dark areas. Increase the contrast to make light areas lighter and dark areas darker. Decrease it to minimize the difference between light and dark areas. Color Adjusts color density. Increase the setting for darker and more opaque colors. Decrease it for lighter and less opaque colors. Tint Adjusts the red-green color balance of the screen. Increase tint to add more green, (NTSC only) or decrease it to add more red. This setting only works with NTSC video signals. Sharpness Adjusts the screen sharpness. Increase the sharpness to make screen images more sharp, or decrease it to make the images less sharp. Gamma Adjusts the projected imagery for natural coloration.
n n n n 48 Audio Menu The Audio menu lets you make adjustments related to audio. Mode Specifies the image signal mode. User can select from Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL 60, SECAM. Reset Returns all menu items to their initial factory defaults. Select this item and then press the Enter button to display the confirmation screen. Next, select Yes and then press the Enter button to reset the menu. If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings. Menu item Description Volume Adjusts the volume level for the speakers and audio- out terminal. Tone Adjusts the sound quality. Reset Returns all menu items to their initial factory defaults. Select this item and then press the Enter button to display the confirmation screen. Next, select Yes and then press the Enter button to reset the menu. If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings. Menu item Description
Menu Options n n n n n n 49 Effect Menu Use the Effect menu to modify what happens when you use the Effects buttons on the remote control and to change the cursor speed . Setting Menu The Setting menu lets you adjust or set the various projector options. Menu item Description Cursor/Stamp Selects the stamp icon you want to use as the cursor graphic and a zoom rate. Box Selects the box color and shape. Marker Selects the marker color and width. Freehand Selects the color and width. Cursor Speed Selects the cursor speed to Low, Middle, or High. Reset Returns all menu items to their initial factory defaults. Select this item and then press the Enter button to display the confirmation screen. Next, select Yes and then press the Enter button to reset the menu. If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings. Menu item Description Keystone Adjusts the trapezoid distorted image to normal. P-in-P Selects the image source (composite or S-Video) for the subscreen.
n n n n 50 Users Logo Menu The User’s Logo menu lets you display a custom logo on the screen. Creating a user logo requires two steps: • Storing a user logo • Assigning the logo to the A/V Mute button No-Signal Msg Specifies whether a black screen, a blue screen, or a user logo displays when the screen is blanked. Prompt Temporarily displays a message on the projector screen to identify which source (computer or video) is providing the image. A/V Mute Turns off/on the audio/video output of the projector, clears all special effects, and displays a black, blue, or user logo screen. Power Mgmt Sys You can select to turn off or keep the lamp power on when there is no input source. Reset Returns all menu items to their initial factory defaults. Select this item and then press the Enter button to display the confirmation screen. Next, select Yes and then press the Enter button to reset the menu. If you change your mind, select No and then press the Enter button to clear the confirmation screen without changing any settings. Menu item Description
Menu Options n n n n n n 51 Storing a User Logo Follow these steps to capture and store a logo. 1. Display the image(with the projector) you wish to use as a logo. 2. Press the Menu button to open the Menu window. 3. Select the User’s Logo menu option by pressing the pointer button. Then press the Enter button to display the User’s Logo Setting window. 4. The message, “Do you use the present image as a user logo?” appears on the screen. Choose Yes or No by pressing left or right of the Enter button. Then press Enter button. 5. When you choose “Yes” in the step 4, a selection box will appear over the image. To select the portion of the image you wish to use as the logo, use the Enter button. Once you have selected the desired area, press the Enter button. 6. The message “Do you use this image?” appears on the screen. Select Yes and press the Enter button. If you want to change the position, select No. 7. Next, the Zoom rate setting window appears on the screen. Select a rate using the arrow buttons, then press the Enter button. 8. The message “Do you save this user logo?” appears on the screen. Select Yes and press the Enter button. If you don’t want to save the logo, select No. ¨ Note: Saving the logo may take a moment. Do not use the projector or other sources (computer, video, speaker, etc.) while the logo is being saved. 9. When the message “Saving the user logo is completed” appears on the screen, press the Menu or Enter button to display the Main Menu.
n n n n 52 Assigning the Logo to the A/V Mute Button Follow these steps to assign the logo to the A/V Mute button: 1. Press the Menu button to open the Menu window. 2. Select the Setting menu and press the Enter button. 3. Select the Blank option (A/V Mute), then highlight User Logo. 4. Press the Menu button twice. Now you can press the A/V Mute button on the remote control to display the user logo. Reset All Menu Selecting the Reset All menu option resets the settings in all menus to their factory defaults. It does not change or delete any user logo you may have stored. You will be prompted to confirm the reset action. Select Yes or No, then press the Enter button to reset all the settings.