Epson Projector Emp 5500 User Manual

							Focusing and Positioning the Screen Image
n  n  n  n  n  n
29
Using the Remote Control
To use the remote control, point it towards the remote 
control receivers located at the front and back of the 
projector.
To be able to use the remote control as a cordless mouse, 
connect the mouse cable (for PS/2) to the projector and your 
computer.
You can use the remote control up to 10 metres (33 feet) 
from the projector.
¨
Note: The projector may not respond to remote control 
commands in these conditions: ambient light is too bright; a 
certain type of fluorescent light is present; a strong light source 
(such as direct sunlight) shines into the infrared receiver; or 
other equipment emitting infrared energy is present (such as a 
radiant room heater). Correct these conditions to use the remote 
control or control the projector from a computer.
¨
Note: If you use the other mouse except the PS/2 mouse, you need 
to purchase the Link Set to connect.
Menu
1
24
5
3
- Volume +
Power Source
Effects
Resize
Help Custom
FreezeAV/Mute
bottom
multi-purpose 
button top
multi-purpose 
button pointer button
Remote control 
						

							n  n  n  n  n
30
In addition to the remote control, you can also control the 
projector by using the buttons on the projector’s operation 
panel located on top of the projector.
This table summarizes the functions on the remote control.  
Button Function
Menu Displays or hides the menu.
Source Switches the input source to Conmputer or Video.
Effects buttons Use to display special effects; 1 Pointer, 2 Box, 3 Line, 
4 Marker, 5 Clear.
Top multi-
purpose buttonActs as a right mouse click, registers a menu 
selection, and selects other custom functions.
Bottom multi-
purpose buttonActs as a left mouse click, registers a menu selection, 
and selects other custom functions.
Help Displays the help menu for various types of problems 
you may encounter.
Resize Switches between Resizing screen and Window 
screen (PC input).
Custom Zooms an image using the Mouse Right/Left buttons.
Freeze Keeps the current computer or video image on the 
screen.
AV/Mute Turns off the image and sound of the projector 
temporarily.
 – Volume + Adjusts the volume.
Power Turns the projector on or off. 
						

							Focusing and Positioning the Screen Image
n  n  n  n  n  n
31
Using the Operation Panel
You can use the operation panel to control the projector 
instead of the remote control. However, you can program and 
access the custom features only using the remote control. 
Enter button
Operation Panel 
						

							n  n  n  n  n
32
The following table summarizes the functions on the 
operation panel.   
Button Function
Power Turns the projector on or off.
Source Switches the input source to Conmputer or Video.
Menu Displays or hides the menu.
Up, down arrows 
(Sync+/Sync-)Synchronizes the computer’s graphic signal.
Use these buttons to adjust an overall image that is 
fuzzy or streaked, or to select menu items during 
menu operations.
Left, right 
arrows(tracking-/ 
tracking+)Matches the projector’s internal clock to various 
computer graphic signals (tracking adjustment).
Use these buttons to adjust an image with vertical 
lines, or to change numeric settings during menu 
operations.
Enter key Registers a menu selection.
Resize Switches between Resizing screen and Window 
screen (PC input).
AV/Mute Turns off the screen and sound of the projector 
temporarily.
 – Volume + Adjusts the volume.
Help Displays the help menu for various types of problems 
you may encounter. 
						

							Projector Status Indicators
n  n  n  n  n  n
33
Projector Status Indicators
The power and lamp indicators at the top of the projector tell 
you its operating status.
¨
Caution: A red indicator warns you if a serious problem occurs. 
See Chapter 5, “Troubleshooting,” for what to do if a warning 
light comes on.
Operation Indicator
Displays machine condition.
Color Status Meaning
Orange Lit Sleep mode.
Green Flashing The projector is warming up. Allow about 
30 seconds.
Green Lit
(every 1 sec)Power and the projection lamp are on.
Lit 
(every 2 sec)The computer is in the suspended mode. 
When the suspended mode is released, 
the projector starts projecting.
Orange Flashing Projection lamp is off, and the projector is 
cooling down for 2 minute. During the 
cooling, any operations can not be 
executed.
Red Flashing There is an internal projector problem, or 
the power to the projector has been cut off.
Temperature Indicator
Lamp IndicatorOperation Indicator 
						

							n  n  n  n  n
34
Lamp Indicator
Displays lamp condition.
This indicator is off when the projector is in a normal 
condition.
Temperature Indicator
Displays the internal temperature condition.
This indicator is off when the projector is in a normal 
condition.
Color Status Meaning
- Off Lamp is functioning normally.
Orange Flashing The lamp needs to be replaced.
Red Lit Projection lamp has reached the end of its 
life and will not longer project images. 
Replace the projection lamp with a new 
one.
Red Flashing There is a problem with the projection 
lamp, lamp power supply, lamp fuse, or a 
circuit malfunctioned in the projector.
Color Status Meaning
- Off The projector is functioning normally.
Orange Flashing The projector is too hot.
Red Lit The projector has turned off automatically 
because of overheating.
Red Flashing There is problem with the cooling fan or 
temperature sensor. Call service 
representative. 
						

							  n     n        n     n     n    n     n     n    n    n     n     n      n      n      n
n  n  n  n  n  n
35
3
Using the Projector Menus
The seven projector menus enable you to control your 
projector.
• The Computer menu controls the computer image, such as 
brightness and contrast, when the image source is 
computer. 
• The Video menu controls the video image, such as 
brightness and color saturation, when the image source is 
video, such as a VCR.
• The Audio menu controls audio features, such as the 
volume level, tone setting, and   sound.
• The Setting menu enables you to set various projector 
options.
• The User’s logo menu allows you to select special features 
such as zoom, backcolor or logo.
• The Effect menu allows you to use effect buttons.
• The About menu provides information about lamp hours, 
frequency and etc..
• The Reset All menu returns all settings to their factory 
defaults. 
						

							n  n  n  n  n
36
Accessing the Main Menu
To display the Main menu, press the Menu button on the 
operation panel or remote control. The Main menu appears:
Press the Menu button again to hide the menu. 
Changing a Menu Setting
To change a menu setting: 
1. Press the Menu button on the operation panel or remote 
control to display the Main menu.  
						

							Changing a Menu Setting
n  n  n  n  n  n
37
2. Press the up or down buttons (operation panel) or press 
the top or bottom of the pointer button (remote) to scroll 
through the menu choices.
Menu
1
24
5
3
- Volume +
Power Source
Effects
Resize
Help Custom
FreezeAV/Mute
up and down 
buttons
pointer button 
						

							n  n  n  n  n
38
3. Press either the Enter button (operation panel) or the top 
or bottom multi-purpose button (remote) to display a 
submenu. 
As you select a menu, a sub-menu of options appears to the 
right.
¨
Note: The options available in some submenus vary, depending 
on whether the current image source is the computer or a video 
source.
Menu
1
24
5
3
- Volume +
Power Source
Effects
Resize
Help Custom
FreezeAV/Mute
bottom
multi-purpose
buttontop
multi-purpose
button
Enter button