Epson Projector Emp 3500 Specifications

1/5/99
ESC / VP Reference ManualLevel 3
Page 71
Gamma Data ( Group  :  8   Item  :  3 )
Sets gamma data directly from outside.
    [Function]      Sets gamma data and sends 33 gradation data for each RGB.
  [Form]       1B  28  01  08  03  Parameter  CS
  [Parameter]
This parameter specifies RGB type and sets gamma data.
    R G B  Type  :  1 byte         ( R : 00   G : 01   B : 02 )
    Gamma Data  :     33 byte       ( No correction  0 to 32 )



 
Get Gamma Data...

1/5/99
ESC / VP Reference ManualLevel 3
Page 72
CPU A / D Register ( Group  :  8   Item  :  4 )
Get CPU A / D Register
    [Function]      Gets values of CPU A / D register data.
  [Form]       1B  07  02  08  04  Parameter  CS
  [Parameter]
This param eter specifies A / D register.
L C P 1
A / D Register :   ( 0 to 1 ) 1 byte
L C P 2
A / D Register :   ( 0 to 2 ) 1 byte
Detecting Temp ( L V side)   : 0
Detecting Temp (Lamp side)   : 1
Detecting Temp (P B S side)   : 2
  [Return Value]
Returns register...

1/5/99
ESC / VP Reference ManualLevel 3
Page 73
Key Codes ( Group  :  8   Item  :  5 )
Get Key Codes
    [Function]      Gets key codes of keys.
  [Form]       1B  06  02  08  05  EB
  [Return Value]
Returns key codes have been pressed so far. Each key is represented by 1 bit, so if more than
two keys are pressed at same time, it returns the sum of them.
Key Codes :      ( 5 byte )
S t a n d b y  :      0000000001 S y n c + :      0000008000
C o m p u t e r  :      0000000002 S y n c - :      0000010000...

1/5/99
ESC / VP Reference ManualLevel 3
Page 74
F R O M  Checksum ( Group  :  8   Item  :  6 )
Making F R O M    Checksum
  [Function]   Makes checksum of FROM presently contained.
  [Form]       1B  06  01  08  06  CS
  [Parameter]     Non




 	
 (Note) Making the checksum takes 6 seconds. No commands are accepted during it.
Get F R O M    Checksum
  [Function]   Gets the checksum of FROM.
  [Form]       1B  06  02  08  06  CS
  [Return Value]
Returns the checksum of F R O M.


*	...

1/5/99
ESC / VP Reference ManualLevel 3
Page 75
Mouse Movement ( Group  :  8   Item  :  7 )
Mouse Movement Setting
    [Function]      Permits or inhibits mouse movements.
  [Form]       1B  07  01  08  07  Parameter  CS
  [Parameter]
This parameter specifies the data to Permit or Inhibit.
    Possible Data for Setting :
Inhibit    :  00
Permit    :  01


	
Get State of Mouse Movement
    [Function]      Gets the state of mouse movement.
  [Form]       1B  06  02  08  07  E9
  [Return...

1/5/99
ESC / VP Reference ManualLevel 3
Page 76
O S D Parameter ( Group  :  8   Item  :  8 )
O S D Parameter Setting
    [Function]      Sets parameters of OSD display. (W hen displaying OSD, first you need to preset the
              following settings related to the OSD display.)
  [Form]       1B  Size  01  08  08  Parameter  CS
  [Parameter]
  ( For  EMP/ELP-3500 )
This parameter sets the start coordinate for OSD display, line width, letter size, backcolor and
flashing cycle.
Start X-coordinate...

1/5/99
ESC / VP Reference ManualLevel 3
Page 77
 ( For EMP/ELP-5000, 5100, 7000, 7100 )
The parameters sets the start coordinate for OSD display, line width, letter size,
backcolor and flashing cycle.
Start X-coordinate      :  Start X-coordinate on the OSD screen
 (Pixel Unit 60 to 775)    2 byte
Start Y-coordinate      : Start Y-coordinate on the OSD screen
 (Pixel Unit 0 to 581)    2 byte
Height of Characters : Height of Characters (Pixel unit    18 to 63)    1 byte
OSD Backcolor :   1 byte
BLACK = 0...

1/5/99
ESC / VP Reference ManualLevel 3
Page 78
O S D  Character Data ( Group  :  8   Item  :  B )
O S D    Character Data Setting
    [Function]      Sets characters to display OSD. (If displaying OSD, you first need to preset for OSD
          display in the OSD parameter settings.)
  [Form]       1B  Size  01  08  0B  Parameter  CS
  [Parameter]
  (For EMP/ELP-3500)
This parameter sets the display position on the OSD screen and number of characters in
order of displaying character parameters and...

1/5/99
ESC / VP Reference ManualLevel 3
Page 79
    ( For EMP/ELP-5000, 5100, 7000, 7100 )
The parameter sets the display position on the OSD screen and number of characters in
order of displaying character parameters and character codes repeatedly.
  Parameter :
Display position on the OSD screen    :   2 byte
    [X-position : 1 byte]
Specify the start position to display with character’s
coordinates.    Range : 0 to 32
    [Y-position : 1 byte]
Specify the start position to display with character’s...

1/5/99
ESC / VP Reference ManualLevel 3
Page 80
No Gamma ( Group  :  8   Item  :  C )
No Gamma Setting
    [Function]      Controls digital gamma correction.
  [Form]       1B  07  01  08  0C  Parameter  CS
  [Parameter]
    Possible Data for Setting :
No   :  00
Yes    :  01 (only EMP/ELP-5000, 5100, 7000 and 7100 are available)