Epson Projector Emp 1717 User Manual

Functions for Enhancing Projection
21
Once the connection has been made, the mouse pointer can be operated as 
follows.
q
 The USB cable can only be connected to computers with a 
standard USB interface. If using a computer which is 
running Windows, the computer must have had a full 
version of Windows 98/2000/Me/XP Home Edition/XP 
Professional installed. If the computer is running a 
version of Windows 98/2000/Me/XP Home Edition/XP 
Professional that has been upgraded from an earlier 
version of...

Functions for Enhancing Projection
22
q
 If the mouse button settings are set to reverse on the 
computer, the operation of the remote control buttons will 
also be reversed.
 The wireless mouse function cannot be used while the 
following functions are being used.
· While a configuration menu is being displayed 
· While a help menu is being displayed
· While the E-Zoom function is being used
· While a users logo is being captured
· Pointer function
· While adjusting sound volume 

23
Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)When several projectors are lined up and projecting images, you can 
adjust the brightness and colour tone of each projectors image with 
multi-screen colour adjustment so that the colours of images from 
each projector match closely.
In some cases the brightness and colour tone may not match 
completely even after adjustment.Summary of Adjustment Procedure
Make adjustments according to the following procedure.
1. Setting screen...

Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)
24
B
Choose the ID you want to set and press the [Enter] 
button.
C
Press the [Menu] button to close the configuration 
menu. Point the remote control at the remote receiver on the projector 
you want to operate, press the numeric button corresponding to 
the screen ID set while holding down the [Num] button, and then 
you can operate only the projector specified with the ID number.
 You can operate all projectors regardless of...

Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)
25
D
Adjusting Color Correct. (G/R) and Color Correct. 
(B/Y). Each time the [Enter] button is pressed the image displayed 
changes between the pattern display and the actual image, and you 
can check the adjustment results and make corrections in the actual 
image.
E
Repeat procedures 2 to 4 until adjustments are 
finished.
F
When all adjustments are finished, press the [Menu] 
button to close the configuration menu. 

26
Security FunctionsThe projector has the following security functions.
 Password Protect
You can limit who can use the projector.
 Operation Lock
You can prevent people changing the settings on the projector 
without permission.Managing Users (Password Protect)
When Password Protect is activated, people who do not know the 
password cannot use the projector to project images even if the projector 
power is on. Furthermore, the users logo that is displayed when you turn 
on the projector cannot be...

Security Functions
27
fSetting Password Protect
Use the following procedure to set Password Protect. A
Hold down the [Freeze] button for about five 
seconds. The password protect setting menu is displayed. 
B
Turn on Power On Protect. (1) Select Power On Protect, and then press the [Enter] button. 
(2) Select On, and then press the [Enter] button. 
(3) Press the [Esc] button. 
C
Turn on Password Timer.If you do not use this setting, go to step 4.
(1) Select Password Timer, and then press the [Enter]...

Security Functions
28
F
Set the password. (1) Select Password, and then press the [Enter] button.
(2) The message Change the password? is displayed, select 
Yes and then press the [Enter] button. The default setting for 
the password is 0000. Change this to your own desired 
password. If you select No, the screen shown in step 1 is 
displayed again.
(3) While holding down the [Num] button, enter a four digit 
number using the numeric buttons. The number entered is 
displayed as * * * *. When you enter...

Security Functions
29
Restricting Operation (Operation Lock)
Do one of the following to lock the operation buttons on the control panel.
Full lock
All of the buttons on the control panel are locked. You cannot perform 
any operations from the control panel, including turning the power on or 
off.
 Partial lock
All of the buttons on the control panel, except for the [Power] button, 
are locked.
This is useful at events or shows when you want to deactivate all buttons 
and only project, or at schools...

Configuration MenuThis chapter explains how to use the configuration menu and its functions.Using the Configuration Menu .......................... 31
List of Functions ................................................. 32
 Image Menu .......................................................................32
 Signal Menu .......................................................................33
 Settings Menu ....................................................................34
 Extended Menu...