Epson Projector Emp 1705 User Manual

31
Using the Configuration Menu
A
Selecting from the 
top menu
C
Changing the 
selected item
B
Selecting from the 
sub menu
Top menu
Sub menu (Settings) Guide
Select the setting to change
Using the remote controlUsing the control panel
Buttons used
D
Exit 

32
List of FunctionsImage Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each 
image signal.
Sub Menu
Function
Color Mode
You can select the quality of the image to suit your surroundings. sp.15
Brightness
You can adjust the image brightness. 
Contrast
g
You can adjust the difference between light and shade in the images. 
Color Saturation
You can adjust the colour saturation for the images....

List of Functions
33
Signal Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each 
image signal.
Sub Menu
Function
Auto Setup
You can select whether, when the input signal changes, the image is automatically adjusted to the optimum state (On) or not (Off). sp.48
Tracking
g
You can adjust computer images when vertical stripes appear in the images. sp.48
Sync.
g
You can adjust computer images when...

List of Functions
34
Settings Menu
Sub Menu
Function
Keystone
You can correct vertical keystone distortion in images. sQuick Start Guide
Auto Keystone
You can correct keystone distortion automatically.
(This item can only be selected when Front is selected from Extended - Projection)
Operation Lock
You can use this to restrict operation of the projectors control panel. sp.29
Po in t e r Sh ap e
You can select the shape of the pointer. sp.18
Pointer 1:  Pointer 2:  Pointer 3:
Brightness Control
You can...

List of Functions
35
Extended Menu
Sub Menu
Function
Display
You can make settings related to the projectors display. 
Messages: You can set whether to display (On) or not display (Off) the source name when you change the input source, the colour mode name when 
you change the colour mode, a message when no image signal is input, and so on. 
Display Background
*: You can set the screen status for when no image signal is available to Black, Blue, or Logo. 
Startup Screen
*: You can set if the startup...

List of Functions
36
Operation
Direct Power On: You can set whether Direct Power On is enabled (On) or disabled (Off). 
When it is set to On and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity when power 
comes back on after a power outage may cause the projector to turn on automatically. 
Sleep Mode:
 You can set whether projection stops automatically (On) or not (Off) when no operations are carried out for about 30 minutes while no image...

List of Functions
37
Network Menu (EMP-1715/1705 Only)
When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after 
setting Network Protect to Off. sp.27
Sub Menu
Function
To  N e t w o r k  
Configuration
You can display the network settings screen. sEasyMP Operation Guide Preparing the Projector, Wireless LAN Quick Connection Guide 

List of Functions
38
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items displayed vary depending on the image signal currently 
being projected as shown in the following screen shots.
Sub Menu
Function
Lamp Hours
You can display the cumulative lamp operating time
*.
When it reaches the lamp warning time, the characters are displayed in yellow.
Source
You can display the input port name for the connected equipment currently being...

List of Functions
39
Reset Menu
Sub Menu
Function
Reset All
You can reset all items in all menus to their default settings. 
The following items are not reset to their defaults: Computer Input, Users Logo, Multi-screen, all items for Network menus, Lamp Hours, 
and Language. 
Reset Lamp Hours
You can clear the cumulative lamp hours use time, and return it to 0H. Reset when you replace the lamp. 

TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found. Using the Help..................................................... 41
Problem Solving................................................. 42
 Reading the Indicators......................................................42
t Power indicator lights red .......................................................... 43
i · o Indicator is lit or flashing orange......................................... 44
 When the...