Epson Projector EH-TW9300W User Manual

Appendix
120
Signal Refresh Rate (Hz) Resolution (dots)
4K x 2K 24/25/30 3840 x 2160
4K x 2K (SMPTE) 24 4096 x 2160
*1HDMI4 port only
*2When projecting in WirelessHD, the following signals are not supported.
4K x 2K(SMPTE): 24 Hz 

Appendix
121
Specifications
Product nameEH-TW9300W/EH-TW9300/EH-TW8300W/EH-TW8300/EH-TW7300
Appearance520 (W) x 170 (H) x 450 (D) mm (not including adjustable foot)
Panel Size0.74" wide
Display methodPolysilicon TFT active matrix
Resolution1920 (W) x 1080 (H) x 3
Focus adjustmentMotorized
Zoom adjustmentMotorized (Approx. 1 to 2.1)
Lamp (light source)UHE lamp 250 W, Model No.: ELPLP89
Lamp replacement time3400 hours
Power supply100 - 240 V AC ±10%, 50/60 Hz, 3.8 - 1.7 A
Power con-
sumption100 to 120...

Appendix
122 Обладнання відповідає вимогам Технічного регламенту обмеження використання деяких небезпечних
речовин в електричному та електронному обладнанні.
Angle of tilt
If you use the projector tilted at an angle of more than 3°, it could be dam-
aged or cause an accident. 

Appendix
123
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
Tel: 562-981-3840
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the
FCC rules as a Class B digital device. Each product marketed, is identical to the representative...

Appendix
124
Appearance
Units: mm


B

 
aCenter of lens
b Distance from center of lens to suspension bracket fixing point

 .Y -&/4

 
 
 

Appendix
125
List of Safety Symbols
The following table lists the meaning of the safety symbols labeled on the equipment.
Symbol mark Approved stand-
ardsMeaning
IEC60417
No. 5007"ON" (power)
To indicate connection to the mains.
IEC60417
No. 5008"OFF" (power)
To indicate disconnection from the mains.
IEC60417
No. 5009Stand-by
To identify the switch or switch position by means of which part
of the equipment is switched on in order to bring it into the stand-
by condition.
ISO7000
No....

Appendix
126
Symbol mark Approved stand-
ardsMeaning
IEC60417
No. 5032Alternating current
To indicate on the rating plate that the equipment is suitable for
alternating current only; to identify relevant terminals.
IEC60417
No. 5031Direct current
To indicate on the rating plate that the equipment is suitable for
direct current only; to identify relevant terminals.
IEC60417
No. 5172Class II equipment
To identify equipment meeting the safety requirements specified
for Class II equipment according to IEC...

Appendix
127
Maximum radio-frequency power transmitted
Models
H711B WiT4-G0
WirelessHD Transmitter 60.16275-60.95725 GHz
-32dBm
e.i.r.p.
WirelessHD Receiver 60.16275-60.95725 GHz 27dBm
e.i.r.p.
-
4k Wireless Transmitter 60.16275-60.95725 GHz-32dBm
e.i.r.p.
4k Wireless Receiver 60.16275-60.95725 GHz 27dBm
e.i.r.p.
- 

Appendix
128
Glossary
This section briefly explains the difficult terms that are not explained in context in the text of this guide. For
details, refer to other commercially available publications.
Aspect RatioThe ratio between an image's length and its height. Screens with a horizontal:vertical ratio
of 16:9, such as HDTV screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of 4:3.
HDCPHDCP is an abbreviation for High-bandwidth Digital Content Protection. It is...

Appendix
129
General Notes
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting from the use of the infor-
mation contained herein.
Neither Seiko...