Epson Projector BrightLink 455Wi User Manual

Using the Interactive Pens51
5. Continue until all of the circles are black.
After you have finished calibration, you can use either pen as a mouse 
on the projection board or wall. With additional software, you can 
also use the pens to write or draw on the projected image. See the next 
section for more information. 
Using the Pens
The Easy Interactive Driver allows you to use the pen as a mouse. If 
you installed interactive whiteboard software such as RM Easiteach or 
TeamBoard Draw, you can also use...

52Using the Interactive Pens
■To double-click, tap twice.
■To right-click, tap while pressing the button on the pen.
■To click and drag, tap and drag with the pen.
To use the pen for writing or drawing on the board, you need to 
install annotation software, such as TeamBoard Draw or RM 
Easiteach. 
Using the Tablet PC Function
When you install the Easy Interactive Driver, the Tablet PC function 
is enabled in Windows 7 and Windows Vista. This allows you to 
annotate, use handwriting input, and perform...

53
4
Presenting With the Remote 
Control
The projector includes a number of tools to enhance your 
presentation. All of them can be accessed using the remote control, 
which lets you operate the projector from anywhere in the room—up 
to 19.7 feet (6 meters) away. 
This chapter covers:
■Using the remote control
■Controlling the picture and sound
■Displaying Patterns
■Operating your computer with the remote control
■Highlighting your presentation
■Presenting a slideshow from a USB device  

54Presenting With the Remote Control
Using the Remote Control
Make sure batteries are installed as described on page 113. Follow 
these tips for using the remote control: 
■Point the remote control at the projector or at the screen.
■Stand within 19.7 feet (6 meters) of the projector.
■Aim the remote control within 30° to the side of, or 15° above or 
below, the remote control receivers on the projector. 
Controlling the Picture and Sound
You can use the remote control to temporarily turn off the picture...

Presenting With the Remote Control55
Stopping Action
Press the Freeze button on the remote control to stop the action in 
your video or computer image. The image freezes but the sound 
continues.
To restart the action, press the 
Freeze button again.
Zooming In on Your Image
You can zoom in on a portion of the image using the E-Zoom buttons 
on the remote control. 
If you are using one of the interactive pens, the pen position and 
mouse position will not match when you press the 
E-Zoom buttons.
1....

56Presenting With the Remote Control4. While the image is enlarged, you can:
■Use the arrow buttons to move around the screen.
■Press the E-Zoom – button to zoom out. 
5. Press the 
ESC button to return the image to its original size.
Controlling the Volume
To change the volume on the projector, press the   or   button on 
the remote control. 
You can also adjust the volume using the projector’s menu system. 
Seepage69. 
Displaying Patterns
You can display a test pattern or one of the following 4...

Presenting With the Remote Control57
4. Select one of the patterns shown on page 56, or choose Test 
Pattern
. If you want to create your own pattern, choose User 
Pattern
. See below for more information.
5. Press 
Enter to select the pattern you want, then press Esc.
6. Choose 
Pattern Display to display the pattern.
7. Press 
Esc when you’re finished displaying the pattern.
Assigning a Pattern to the User Button
You can assign any of the available patterns to the User button on the 
remote control,...

58Presenting With the Remote Control5. When you see a confirmation message, select 
Yes and press 
Enter. Saving the image may take a few moments. Do not use 
your projector, remote control, or video source while the pattern 
is being saved.
6. When you see a message that saving is complete, press 
Menu to 
exit. 
Operating Your Computer With the 
Remote Control
You can use the remote control in place of your computer’s mouse so 
you won’t have to stand next to the computer to control the 
presentation....

Presenting With the Remote Control59
Then you can control your computer as follows:
■Use the remote control’s Page Up or Page Down buttons to 
move through presentation slides.
■Use the arrow buttons to move the cursor on the screen.
■Press the Enter button once to left-click, or twice to double-click. 
Press the 
Esc button to right-click.
■To drag-and-drop, hold down the Enter button. Then use the 
arrow buttons to drag the object. When it’s where you want it, 
release the 
Enter button.
Highlighting...

60Presenting With the Remote Control
Customizing the Pointer Tool
You can change the appearance of the pointer by choosing from three 
alternative shapes. 
1. Press the 
Menu button on the remote control, highlight the 
Settings menu, highlight Pointer Shape, and press Enter. You 
can select one of the pointer shapes shown at the left.
2. Select the shape you want and press 
Enter.
3. Press 
Menu to exit from the menu system. 
Presenting a Slideshow 
You can use your projector’s Slideshow feature...