Epson Projector BrightLink 1430Wi User Manual

							Parent topic:
Projector Part Locations
Projector Parts - Touch Unit The Touch Unit comes with the BrightLink Pro 1430Wi projector only.
Front (Cover On)
Front (Cover Off)
1 Dial cover
2 TCH port
3 Security slot
4 Adjustment dials
5 Power light 31   
						

							Rear
1 Laser diffusion ports
2 Installation magnets
3 Guide markers (used for performing angle adjustment)
Parent topic: Projector Part Locations
32  
						

							Projector Parts - Control Pad
1 Power button
2Whiteboard button (switches to whiteboard mode)
3 Source Search button (searches for connected sources)
4 Capture button (captures projected image in annotation mode)
5 Print button (prints the projected image)
6 Save button (saves the projected image)
7 USB-B port for connecting a computer (on bottom of control pad)
8 USB-A port for connecting a USB thumbdrive or other storage device (under bottom cover)
9 Printer USB-A port for connecting a printer (under top cover)
10 USB-B port for connecting to the projector for printing or thumbdrive access (under top cover)
11 USB-A port for connecting to the projector for interactive functions (under top cover)
12 Remote port for connecting the optional remote control cable (under top cover)
33  
						

							13 Light emitting areas (output remote control signals)
14 Bottom cover (open to connect a USB thumbdrive or other storage device)
15 Top cover (open to connect cables or replace batteries)
16 Cable cover (open when cables are wired along a wall)
Parent topic: Projector Part Locations
34 
						

							Setting Up the Projector
Follow the instructions in these sections to set up your projector for use.
Projector Placement
Removing and Attaching the Cable Cover
Adjusting the Angle of the Touch Unit
Installing the Projector Feet
Projector Connections
Installing Batteries in the Remote Control
Installing Batteries in the Pens
Installing Batteries in the Control Pad
Projector Placement Your ultra-short throw projector is designed to be installed on a wall (with a wall mount) or vertically on a
table (with a table mount) to create an interactive tabletop workspace.
Keep these considerations in mind as you select a projector location:
• Follow the instructions in the Installation Guideprovided with your mounting hardware to install the
projector using the included mounting equipment.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or extension cord.
• If installing vertically on a desk or table, the table projection mount (V12H516020) is required.
• If installing on a wall, the wall mount (V12H675020) is required.
Projector Setup and Installation Options
Projection Distance
Parent topic: Setting Up the Projector
Projector Setup and Installation Options You can set up or install your projector in the following ways:
35 
						

							Mounted on the wall or ceiling
Mounted vertically on a table to create an interactive workspace
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle.
Parent topic:
Projector Placement
Related references
Projector Setup Settings - Extended Menu
Projection Distance The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Use the tables here to determine approximately how far to place the projector from the screen based on
the size of the projected image. (Conversion figures may have been rounded up or down.) For more
detailed information and installation instructions, see the Installation Guideprovided with your wall
36   
						

							mount. You can also use the projector Throw Distance Calculator at
epson.com/support(U.S.) or
epson.ca/support (Canada).
Note: All minimum ceiling heights are based on an image 30 inches (76 cm) from the floor.
16:10 Aspect Ratio Diagonal Min. ceiling Image Image height Min. projection Distance from top
image height widthdistance of image to wall
size plate holes
60 inches 78.7 inches 50.9 31.8 inches 2.5 inches 6.9 inches (17.4 cm) (199.8 cm) inches (80.8 cm) (6.2 cm) (129.2 cm)
70 inches 85.0 inches 59.4 37.1 inches 4.9 inches 7.9 inches (20.1 cm) (215.9 cm) inches (94.2 cm) (12.4 cm) (150.8 cm)
80 inches 91.4 inches 67.8 42.4 inches 7.3 inches 9.0 inches (22.7 cm) (232.0 cm) inches (107.7 cm) (18.7 cm) (172.3 cm)
88 inches 96.4 inches 74.6 46.6 inches 9.3 inches 9.8 inches (24.9 cm) (245.0 cm) inches (118.5 cm) (23.6 cm) (189.5 cm)
90 inches 97.7 inches 76.3 47.7 inches 9.8 inches 10.0 inches (248.2 cm) inches (121.2 cm) (24.9 cm) (25.4 cm) (193.9 cm)
100 inches 104.1 inches 84.8 53.0 inches 12.2 inches 11.1 inches (264.3 cm) inches (134.6 cm) (31.1 cm) (28.1 cm) (215.4 cm)
16:9 Aspect Ratio Diagonal Min. ceiling Image width Image height Min. projection Distance from top
image height distance of image to wall
size plate holes
59 inches 77.5 inches 51.5 inches 28.9 inches 2.6 inches 8.5 inches (21.7 cm) (196.8 cm) (130.6 cm) (73.5 cm) (6.6 cm)
37 
						

							Diagonal Min. ceiling Image width Image height Min. projection Distance from top
image height
distance of image to wall
size plate holes
60 inches 78.1 inches 52.3 inches 29.4 inches 2.9 inches 8.7 inches (22.0 cm) (198.3 cm) (132.8 cm) (74.7 cm) (7.3 cm)
70 inches 84.3 inches 61.0 inches 34.3 inches 5.4 inches 10.0 inches (214.2 cm) (155.0 cm) (87.2 cm) (13.7 cm) (25.4 cm)
77 inches 88.7 inches 67.1 inches 37.8 inches 7.1 inches 11.0 inches (225.3 cm) (170.5 cm) (95.9 cm) (18.1 cm) (27.8 cm)
80 inches 90.6 inches 69.7 inches 39.2 inches 7.9 inches 11.4 inches (230.1 cm) (177.1 cm) (99.6 cm) (20.0 cm) (28.9 cm)
90 inches 96.8 inches 78.4 inches 44.1 inches 10.4 inches 12.7 inches (246.0 cm) (199.2 cm) (112.1 cm) (26.4 cm) (32.3 cm)
97 inches 101.2 inches 84.5 inches 47.6 inches 12.2 inches 13.7 inches (257.1 cm) (214.7 cm) (120.8 cm) (30.9 cm) (34.7 cm)
4:3 Aspect Ratio Diagonal Min. ceiling Image width Image height Min. projection Distance from top
image height distance of image to wall
size plate holes
53 inches 78.7 inches 42.4 inches 31.8 inches 2.5 inches 6.9 inches (17.4 cm) (199.8 cm) (107.7 cm) (80.8 cm) (6.2 cm)
60 inches 83.7 inches 48 inches 36 inches 4.4 inches 7.7 inches (19.5 cm) (212.5 cm) (121.9 cm) (91.4 cm) (11.2 cm)
70 inches 90.9 inches 56.0 inches 42 inches 7.2 inches 8.9 inches (22.5 cm) (230.8 cm) (142.2 cm) (106.7 cm) (18.2 cm)
77 inches 95.9 inches 61.6 inches 46.2 inches 9.1 inches 9.7 inches (24.7 cm) (243.6 cm) (156.5 cm) (117.3 cm) (23.1 cm)
80 inches 98.1 inches 64 inches 48 inches 9.9 inches 10.1 inches (249.1 cm) (162.6 cm) (121.9 cm) (25.2 cm) (25.6 cm)
88 inches 103.8 inches 70.4 inches 52.8 inches 12.1 inches 11.0 inches (263.7 cm) (182.9 cm) (134.1 cm) (30.8 cm) (28.0 cm)
38 
						

							Parent topic:
Projector Placement
Removing and Attaching the Cable Cover Before you can connect equipment to your projector, you need to remove the cable cover.
1. Remove both of the cable cover screws (screwdriver not included).
2. Slide off the cable cover.
To attach the cable cover, slide it into position and tighten the screws.
Parent topic:Setting Up the Projector
Adjusting the Angle of the Touch Unit You can adjust the angle of the Touch Unit to detect the position of your fingers.
39  
						

							Note:
These instructions require that the Touch Unit is mounted and connected according to the
Installation Guide provided with your projector or projector mount.
1. Turn the projector on.
2. Loosen the screw at the bottom of the Touch Unit.
3. Remove the dial cover from the Touch Unit.
40