Epson Powerlite Tw100 Technical Specifications

EPSON PowerLite TW100 Projector
11/02 EPSON PowerLite TW100 Projector - 11
Turning Off the Picture and Sound 
Press the Blank button on the remote control to darken your 
screen and turn off the sound. When you’re ready to resume, 
press 
Blank again.
If you don’t pause the video it continues to play even though 
you can’t see or hear it. When you press the 
Blank button again 
to resume, the playback does not resume at the exact point you 
paused it.
Note: You can make the blank screen blue, instead of...

EPSON PowerLite TW100 Projector
12 - EPSON PowerLite TW100 Projector 11/02
Using the Remote Control
The remote control uses a line-of-sight infrared signal. It lets 
you access the projector’s features from anywhere in the room—
up to 32 feet away. (This distance may be shorter if the remote 
control batteries are low.) If you have connected the mouse 
cable, you can also use the remote control as a wireless mouse.
The projector may not respond to remote control commands in 
these conditions: 
❏You are...

EPSON PowerLite TW100 Projector
11/02 EPSON PowerLite TW100 Projector - 13
Projector Status Lights
The lights on top of the projector indicate the projector’s 
operating status.
Cleaning the Projector and Replacing 
Parts
Warning: Before you clean any part of the projector, turn it off and 
unplug the power cord. Never open any cover on the projector, 
except the lamp and filter covers. Dangerous electrical voltages in 
the projector can injure you severely. Do not try to service this 
product yourself,...

EPSON PowerLite TW100 Projector
14 - EPSON PowerLite TW100 Projector 11/02 Cleaning or Replacing the Air Filter
Clean the air filter at the bottom of the projector after every 100 
hours of use. If it is not cleaned periodically, it can become 
clogged with dust, preventing proper ventilation. This can cause 
overheating and damage the projector. Follow these steps:
1. Turn off the projector and allow it to cool down.
2. Turn off the switch on the back of the projector.
3. Unplug the power cord.
4. Turn...

EPSON PowerLite TW100 Projector
11/02 EPSON PowerLite TW100 Projector - 15 4. Use a screwdriver to slide the latch and pop open the lamp 
cover. Then lift it up and remove it.
5. Use a screwdriver to loosen the two silver screws holding the 
lamp in place. (You can’t remove these screws.)
6. Grasp the lamp as shown, and pull it straight out.
Caution: Do not touch the glass portion of the lamp assembly.
7. Gently insert the new lamp and tighten its screws.8. To replace the lamp cover, insert the tabs and...

EPSON PowerLite TW100 Projector
16 - EPSON PowerLite TW100 Projector 11/02
Optional Accessories 
You can purchase these accessories from your dealer or by 
calling EPSON at (800) 873-7766; or visit the EPSON StoreSM 
at www.epsonstore.com (U.S. sales only). In Canada, please call 
(800) 463-7766 for dealer referral. 
Related Documentation
CPD-15280 EPSON PowerLite TW100 Quick Setup 
poster
CPD-15282 EPSON PowerLite TW100 User’s GuideProduct Product number
Replacement lamp and air filter V13H010L17...

EPSON PowerLite TW100 Projector
11/02 EPSON PowerLite TW100 Projector - 17
art/TW100PC7.eps 1
art/TW100PC7.eps 1
art/loc_clng.eps 5
art/loc_rear.eps 5
art/loc_rrcl.eps 5
art/loc_shlf.eps 5
art/loc_tbl.eps 5
art/0013.eps 5
art/0013.eps 6
art/0013-2.eps 6
art/screen-001.eps 6
art/Fn.eps 7
art/Fn.eps 7
art/Mac monitor - arrange.tif @ 72 dpi 7
art/mac1grey.tif @ 72 dpi 7
art/mac2grey.tif @ 72 dpi 7
art/0076.eps 8
art/REMOTE.EPS 8
art/0024.eps 8
art/1000.eps 8
art/0022.eps 9
art/0022-2.eps 9
art/0025.eps 9...