Epson Powerlite S7 Multimedia Projector Users Guide

							Presenting With the Remote Control51
To control presentation slides using the remote control’s Page Up or 
Page Down buttons, select Page Up/Down as the USB Type B 
setting on the Extended menu (see page 60). Then you can control 
your presentation using those buttons.
If you want to use the remote control as a wireless mouse, select 
Wireless Mouse as the USB Type B setting on the Extended menu 
(see page 60). Then you can control your presentation as follows:
■Use the arrow buttons to move the cursor on the screen.
■Press the Enter button once to left-click, or twice to double-click. 
Press the 
Esc button to right-click.
■To drag-and-drop, hold down the Enter button. Then use the 
arrow buttons to drag the object. When it’s where you want it, 
release the 
Enter button.
Page up or down 
to change slides 
in PowerPoint
Right-click
Left-click 
						

							52Presenting With the Remote Control
Highlighting Your Presentation
You can display a pointer to call out important information on the 
screen. If you want to customize the pointer tool, you can choose from 
three alternative shapes.
Using the Pointer Tool
1. To activate the pointer tool, press the Pointer button on the 
remote control. A pointer appears on the screen.
If you prefer to use a different style of pointer, see the instructions 
in the next section.
2. Use the arrow buttons on the remote control to position the 
pointer on the screen. 
3. When you’re done using the pointer, press the 
Pointer or Esc 
button to clear the screen.
Customizing the Pointer Tool
You can change the appearance of the pointer by choosing from three 
alternative shapes. 
1. Press the 
Menu button on the remote control, highlight the 
Settings menu, highlight Pointer Shape, and press Enter. You 
can select one of the pointer shapes shown at the left.
2. Select the shape you want and press 
Enter.
3. Highlight 
Return and press Enter. 
4. Press 
Menu to exit from the menu system. 
Pointer 
button 
						

							53
4
Fine-Tuning the Projector
You can use the projector’s on-screen menus to adjust the image, 
sound, and other features. This chapter covers the following 
information:
■Using the menu system
■Adjusting the image
■Adjusting signal settings
■Customizing projector features
■Customizing power and operation
■Using the projector security features 
						

							54Fine-Tuning the Projector
Using the Menu System
You can use the remote control or the projector’s control panel to 
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the 
Menu button on the 
remote control or on the projector. You see a menu screen similar 
to the one below: 
The menus are listed on the left and the options available for the 
highlighted menu are shown on the right.
2. Use the arrow buttons on the remote control or the projector to 
scroll through the menu list. When you’ve highlighted the desired 
menu, press the 
Enter button to select it. 
3. Once you’ve selected the menu, use the arrow buttons to scroll 
through the list of options. (Some of the options may be grayed 
out or unavailable, depending on the selected source.)
4. After highlighting the option you want to adjust, use the arrow 
buttons to change the setting. In some cases, you may have to 
press the 
Enter button to view a sub-screen. 
■Press the left or right arrow button to adjust a slider bar.
■To select from two or more settings, press the up or down 
arrow button to highlight the setting and press 
Enter. 
5. After changing the settings, press the 
Esc button to save your 
changes and return to the previous menu (or press it again to exit 
the menu system). You can also press the 
Menu button to exit. 
Menu list
Options 
						

							Fine-Tuning the Projector55
Restoring the Default Settings
You can use the Reset option on any menu to restore the 
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values, 
select the 
Reset menu, highlight Reset All, press Enter, and select 
Yes to confirm.
Adjusting the Image
1. You can use the Image menu to adjust the brightness, sharpness, 
color, tint, contrast, and 
Auto Iris settings.Press the Menu 
button on the projector or remote control and select the 
Image 
menu. You see a screen similar to one of these:
note
When you select Reset All 
in the Reset menu, it does 
not reset the Input Signal, 
User’s Logo, Language, or 
Lamp Hours settings.
Computer/RGB video Component video/ 
Composite video/ 
S-Video 
						

							56Fine-Tuning the Projector2. Adjust the desired options as needed:
■Color Mode
Lets you quickly adjust the color and brightness for various 
environments. You can save a different setting for each 
source. See page 44 for a description of each color mode.
■Brightness 
Lightens or darkens the overall image. 
■Contrast
Adjusts the difference between light and dark areas. 
■Color Saturation
Adjusts the color depth of the image. 
■Tint
Adjusts the balance of green to magenta in the image. 
■Sharpness
Adjusts the sharpness of the image. 
■Color Temp.
Sets the color temperature of the image. Select High to tint 
the image bluer or 
Low to tint it redder (default setting is 
Medium). (Not available if sRGB is selected as the Color 
Mode setting.) 
■Color Adjustment
Adjusts the color values. Select Red, Green, Blue to adjust 
red, green, and blue hue and saturation values. (Not available 
if 
sRGB is selected as the Color Mode setting.)
■Auto Iris
Automatically adjusts the projected luminance according to 
the brightness of the image. (Available only when 
Dynamic 
or Theater is selected as the Color Mode for the current 
input source.)
note
The available settings vary 
depending on the input 
source selected.
The 
Brightness setting 
changes the opacity of the 
projector’s LCD panels. You 
can also change the lamp’s 
brightness. Select 
Power 
Consumption 
in the 
Settings menu, then choose 
Normal or ECO (the 
default setting is Normal). 
						

							Fine-Tuning the Projector57
Adjusting Signal Settings
Although the projector normally detects and optimizes the input 
signal automatically, you can use the Signal menu to make manual 
adjustments. In addition to changing the position of the projected 
image, you can correct tracking and sync for computer images, or 
change the aspect ratio. 
1. Press the 
Menu button and select the Signal menu. You see a 
screen similar to one of those below. (The settings will be different 
depending on the source you are projecting from.)
2. Adjust the desired options as needed:
■Auto Setup 
Leave this setting 
On to automatically optimize computer 
images. Turn it off if you want to save adjustments you have 
made to the Tracking, Sync, and Position settings.
■Resolution
Set to Auto to have the projector automatically identify the 
resolution of the input signal. If necessary, select 
Wide (for 
widescreen images) or 
Normal (for 4:3 ratio images).
Computer/RGB video Component video
Composite video/S-Video 
						

							58Fine-Tuning the Projector
■Tracking
Adjust this value to eliminate vertical stripes in computer 
images.
■Sync
Adjust this value if computer images appear blurry or flicker.
■Position
If the image is slightly cut off on one or more sides, it may not 
be centered exactly. Select this setting and use the arrow 
buttons to center it.
■Progressive
For composite video, S-Video, and component video. Turn 
this setting on to convert interlaced signals into progressive 
signals (best for moving images). Leave the setting 
Off for still 
images.
■Input Signal
If the colors don’t look right on the Auto setting, select the 
setting for the type of equipment you’ve connected to the 
Computer (Component Video) port. Choose RGB for a 
computer or RGB-video connection, or 
Auto for a video 
player that outputs a component video signal (with 
connectors labeled Y/Cb/Cr or Y/Pb/Pr).
■Video Signal (composite or S-Video signals only)
Select the setting for the type of equipment you’ve connected 
to the 
Video port. Leave this setting at Auto unless you are 
using a 60-Hz PAL system (then select 
PAL60).
■Aspect
Sets the image’s aspect ratio (ratio of width to height). See 
page 45 for more information.
note
You can also use the remote 
control’s 
Auto button to 
automatically reset the 
projector’s Tracking, Sync, 
and Position settings. See 
page 87 for details. 
						

							Fine-Tuning the Projector59
Customizing Projector Features
You can use the Settings menu to lock the buttons on the projector, 
adjust audio volume, and customize several other features.
■Keystone 
Adjusts the shape of the image if the projector has been tilted 
upward or downward. If you notice that lines or edge look jagged 
after adjustment, decrease the 
Sharpness setting (see page 55).
■Zoom (PowerLite S7 only)
Adjusts the image size from 
Wide (larger) to Tele (smaller).
■Control Panel Lock
Lets you disable all of the buttons on the projector, or all of the 
buttons except the Ppower button. See page 66 for more 
information.
■Pointer Shape
Lets you choose from three alternative pointer shapes. See page 52 
for more information.
■Power Consumption
Lets you select from two levels of brightness. The ECO setting 
reduces power consumption and projector noise, and extends the 
lamp’s operating life.
■Volume
Raises or lowers the volume of the projector’s speaker.
PowerLite 79/PowerLite W7
PowerLite S7 
						

							60Fine-Tuning the Projector
■User Button
Lets you create a shortcut to one of the following menu items: 
Closed Caption, Power Consumption, Info, Progressive, 
Resolution. When you press the User button on the remote 
control, the assigned menu item is displayed.
Customizing Power and Operation
You can use the Extended menu to customize the way the projector 
displays images, enable Direct Power On, use closed captioning, turn 
sleep mode on or off, and customize other projector operations.
■Display
Messages: 
Lets you turn screen messages on or off.
Display Background: Sets the screen background to Black, 
Blue, or Logo when no image signal is available.
Startup Screen: Enables or disables display of the startup (User’s 
Logo) screen when the projector is turned on.
A/V Mute: Sets the screen background to Black, Blue, or Logo 
when the 
A/V Mute button is pressed.
■Closed Caption
Lets you display closed captioning for content that provides it.
■User’s Logo
Create a custom startup screen, as described on page 65.