Home > Epson > Projector > Epson Powerlite S6 Users Guide

Epson Powerlite S6 Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Powerlite S6 Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Notices111
    ■Use the type of power source indicated on the projector. Use of a 
    different power source may result in fire or electric shock. If you are not 
    sure of the power available, consult your dealer or power company.
    ■If you use the projector in a country other than where you purchased it, 
    use the correct power cord for that country.
    ■Do not overload wall outlets, extension cords, or power strips. Do not 
    insert the plug into a dusty outlet. This can cause fire or electric shock.
    ■Take the following precautions when handling the plug: Do not hold 
    the plug with wet hands. Do not insert the plug into an outlet with dust 
    present. Insert the plug firmly into the outlet. Do not pull the power 
    cord when disconnecting the plug; always be sure to hold the plug when 
    disconnecting it. Failure to comply with these precautions could result 
    in fire or electric shock.
    ■Do not place the projector where the cord can be walked on.
    ■The lamp(s) in this product contain mercury. Please consult your 
    state and local regulations regarding disposal or recycling. Do not put in 
    the trash.
    ■Do not place anything that can become warped or damaged by heat near 
    the exhaust vents. Do not bring your hands or face close to the vents 
    while projection is in progress.
    ■Before you move the projector, make sure its power is turned off, the 
    plug is disconnected from the outlet, and all cables are disconnected.
    ■Never try to remove the lamp immediately after use because it will be 
    extremely hot. Before removing the lamp, turn off the power and wait at 
    least an hour to allow the lamp to cool completely.
    ■Do not place the source of an open flame, such as a lit candle, on or near 
    the projector.
    ■Do not modify the power cord. Do not place heavy objects on top of the 
    power cord or bend, twist, or pull it excessively. Keep the power cord 
    away from hot electrical appliances.
    ■If the lamp breaks, ventilate the room to prevent gases contained in the 
    lamp from being inhaled or coming in contact with the eyes or mouth.
    ■If the projector is mounted overhead and the lamp breaks, be careful to 
    prevent pieces of glass from falling into your eyes when you open the 
    lamp cover.
    WARNING: The cords included with this product contain chemicals, 
    including lead, known to the State of California to cause birth defects or 
    other reproductive harm. Wash hands after handling. (This notice is 
    provided in accordance with Proposition 65 in Cal. Health & Safety Code 
    §25249.5 and following.) 
    						
    							112Notices
    FCC Compliance Statement
    For United States Users
    This equipment has been tested and found to comply with the limits for a 
    Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
    designed to provide reasonable protection against harmful interference in a 
    residential installation. This equipment generates, uses, and can radiate radio 
    frequency energy and, if not installed and used in accordance with the 
    instructions, may cause harmful interference to radio or television reception. 
    However, there is no guarantee that interference will not occur in a particular 
    installation. If this equipment does cause interference to radio and television 
    reception, which can be determined by turning the equipment off and on, 
    the user is encouraged to try to correct the interference by one or more of the 
    following measures:
    ■Reorient or relocate the receiving antenna.
    ■Increase the separation between the equipment and receiver.
    ■Connect the equipment into an outlet on a circuit different from that to 
    which the receiver is connected.
    ■Consult the dealer or an experienced radio/TV technician for help.
    WARNING
    The connection of a non-shielded equipment interface cable to this 
    equipment will invalidate the FCC Certification of this device and may cause 
    interference levels which exceed the limits established by the FCC for this 
    equipment. It is the responsibility of the user to obtain and use a shielded 
    equipment interface cable with this device. If this equipment has more than 
    one interface connector, do not leave cables connected to unused interfaces. 
    Changes or modifications not expressly approved by the manufacturer could 
    void the user’s authority to operate the equipment.
    For Canadian Users
    This Class B digital apparatus meets all requirements of the Canadian 
    Interference-Causing Equipment Regulations.
    Cet appareil numérique de la classe B respecte toutes les exigences du Règlement 
    sur le materiel brouilleur du Canada. 
    						
    							113
    Index
    A
    A/V Mute
    button, 50
    display settings, 66, 71
    A/V Mute slide
    closing, 50, 67, 83
    opening, 37, 51, 89
    Accessories, 12 to 13
    Air filter
    cleaning, 76 to 77
    ordering, 12
    replacing, 77
    Altitude, 67, 88, 102
    Anti-theft device, 12, 23, 72
    Aspect ratio, 47 to 48, 64, 100
    Audio
    cable, 34
    connecting equipment, 34
    controlling volume, 52
    problems, troubleshooting, 95
    turning off (using A/V Mute), 50
    Auto Iris setting, 62
    Auto Keystone setting, 44, 65
    Auto Setup setting, 63
    B
    Background screen settings, 66, 71
    Bands, vertical, 93
    Batteries, replacing, 82
    Blackboard color mode, 46
    Blurry image, 93
    Brightness, 99
    Brightness Control setting, 65, 78, 81
    Brightness setting, 62
    C
    Cables
    audio, 34
    component-to-VGA, 12, 27, 31
    composite, 27, 29
    HDMI, 28
    illustrations, 16
    ordering, 12 to 13
    security, 73
    S-Video, 12, 30
    USB, 16, 24 to 26, 34 to 35
    VGA, 26, 32
    Capturing image, 70 to 71
    Carrying cases, 10, 13, 16, 83
    Ceiling mount, 12, 23
    Chalkboard, projecting on, 46
    Cleaning
    air filter, 76 to 77
    lens, 76
    projector case, 76
    Color
    correcting, 46, 61 to 62
    problems, 94
    saturation, 62
    settings, 62
    temperature, 62
    Color Mode, 46 to 47, 62
    Component-to-VGA video cable, 12, 27, 31
    Composite video cable, 27, 29
    Computer
    connecting to, 24 to 26
    selecting source, 42
    Connecting projector
    to audio equipment, 34
    to computer, 24 to 26
    to digital camera, 35
    to external monitor, 33
    to USB device, 34 to 35
    to video equipment, 27 to 32
    Contrast ratio, 10, 100 
    						
    							114Index
    Contrast setting, 62
    Control Panel Lock setting, 65, 72 to 73, 89
    Custom screen, see User’s Logo
    D
    Default settings, restoring, 61
    Digital camera, connecting, 35
    Dimensions, projector, 101
    Direct Power On, 39
    Distance from projector to screen, 18 to 19, 
    100
    Documentation, 10 to 11
    DVD player, connecting, 27 to 32
    E
    Electrical specifications, 102
    Environmental specifications, 102
    Epson
    accessories, 12 to 13
    presentation tips, 11
    PrivateLine Support, 11
    technical support, 11, 96 to 97
    warranty, 12
    Error status lights, 88
    Extended menu, 66 to 67
    External monitor, connecting, 33
    E-Zoom buttons, 51
    F
    FCC compliance statement, 112
    Features, projector, 9 to 10
    Feet, projector, 43
    Filter, see Air filter
    Fn key, notebook, 90
    Focusing image, 45
    Freeze button, 51
    Full aspect setting, 48
    G
    Game color mode, 47
    H
    HDMI cable, 28
    HDMI Video Range setting, 64
    HDTV images, video formats, 107
    Height of image, adjusting, 43
    Help system, using, 86
    Help, Epson, 11, 96 to 97
    High Altitude mode, 67, 88, 102
    I
    Image
    adjusting, 43 to 48, 61 to 62
    blurry, 93
    capturing and saving in projector, 70 to 71
    correcting shape, 44 to 45, 65, 92
    fitting on screen, 63, 91 to 92
    height, adjusting, 43
    presentation cameras, 13
    problems with, 89 to 94
    projecting on chalkboard, 46
    raising, 43
    selecting source, 42
    shape, correcting, 44 to 45
    size and projection distance, 18 to 19, 100
    turning off (using A/V Mute), 50
    turning off temporarily, 50 to 51
    zooming, 45, 51
    Image menu, 61 to 62
    Info menu, 81
    Input Signal setting, 26, 31, 32, 64
    Input signal, selecting, 42
    Installing, projector, 17 to 23
    Instant Off, 40
    iPod, connecting, 34 to 35
    K
    Kensington anti-theft device, 12, 23, 73
    Keystone correction, 44 to 45, 65, 92, 101 
    						
    							Index115
    L
    Lamp
    number of hours used, 81
    ordering, 12
    replacing, 78 to 81
    specifications, 101
    status light, 78, 87 to 88
    Lamp timer, resetting, 80 to 81
    Language setting, 67
    Laptop computer
    connecting to, 24 to 26
    display problems, 89 to 90
    selecting source, 42
    Lens Cover Timer setting, 51, 67
    Lens, cleaning, 76
    Light output specifications, 99
    Lights, status, 87 to 88
    Locking
    buttons, 72
    projector, 72
    Logo, saving on projector, 70 to 71
    M
    Macintosh display problems, 91
    Manuals, 10 to 11
    Menus
    changing settings, 60
    default settings, restoring, 61
    Extended, 66 to 67
    Image, 61 to 62
    Info, 81
    Reset, 61, 81
    Settings, 65
    Signal, 63 to 64
    User’s Logo, 70 to 71
    Monitor, connecting external, 33
    Mouse, using remote control as, 53 to 54
    N
    No Signal message, 90 to 91
    Noise level, 101
    Normal aspect setting, 48
    Not Supported message, 91Num button, 69
    Numeric keypad, using, 69
    O
    Optical aspect ratio, 47 to 48, 100
    Options for projector, 12 to 13
    P
    Page Up (+)/Page Down (-) buttons, 53 to 54
    Page Up/Down setting, 54, 67
    Password
    Protect sticker, 16
    protection, 68 to 70
    request code, 69
    Photo color mode, 46
    Picture source, selecting, 42
    Picture, see Image
    Position setting, 64, 91
    Positioning
    image, 43
    projector, 17 to 23
    Power
    button, 39
    specifications, 102
    status light, 39, 87 to 88
    PowerPoint, 23, 54, 55, 67
    Presentation color mode, 46
    Presentation tips and training, 11
    Presenters Online, 11
    PrivateLine Support, 11
    Problems
    color, 94
    image, 89 to 94
    no signal, 90 to 91
    remote control, 95
    sound, 95
    using on-screen help, 86
    Progressive format, 64
    Projection lamp, see Lamp
    Projection setting, 66 
    						
    							116Index
    Projector
    cleaning, 76
    disabling buttons, 72 to 73
    distance from screen, 18 to 19, 100
    features, 9 to 10
    installing, 17 to 23
    lamp specifications, 101
    options, 12 to 13
    password protection, 68 to 70
    positioning, 17 to 23
    resolution, 99
    security features, 67 to 73
    specifications, 99 to 102
    transporting, 83
    troubleshooting, 85 to 97
    turning off, 40
    turning on, 37 to 39
    unpacking, 16
    viewing information about, 81
    R
    Raising image, 43
    Rear-screen projection, 23, 66
    Registration, 12
    Remote control
    A/V Mute button, 50
    as wireless mouse, 53 to 54
    batteries used, 101
    batteries, replacing, 82
    correcting color, 46, 61 to 62
    E-Zoom buttons, 51
    Freeze button, 51
    numeric keypad, using, 69
    problems, 95
    range, 101
    Slideshow button, 35, 36, 42
    specifications, 101
    troubleshooting, 95
    using, 50
    Replacing lamp, 78 to 81
    Request code, password, 69
    Resetting lamp timer, 80 to 81
    Resetting menu options, 61
    Resize image, 47 to 48Resolution, 47 to 48, 91, 99
    Resolution setting, 63
    S
    Safety
    instructions, 109 to 111
    specifications, 102
    Saturation setting, 62
    Screen
    distance from projector, 18 to 19, 100
    ordering, 12 to 13
    startup screen, creating, 70 to 71
    Screen image, see Image
    Screen, distance from projector, 18 to 19, 100
    SD card, inserting, 36 to 37
    Security
    cables, 73
    Control Panel Lock, 72 to 73
    identifying logo, 70 to 71
    Kensington lock, 12, 73
    password protection, 68 to 70
    Settings menu, 65
    Sharpness setting, 62
    Signal menu, 63 to 64
    Sleep mode, 40, 67, 87, 89
    Slideshow
    button, 35, 36, 42
    options, 57 to 58
    running, 55 to 57
    Sound, troubleshooting, 95
    Source, selecting, 42
    Speaker, specifications, 100
    Specifications
    brightness, 99
    dimensions, 101
    electrical, 102
    environmental, 102
    general, 99
    lamp, 101
    remote control, 101
    resolution, 99
    safety, 102
    speaker, 100
    video formats, 103 to 107 
    						
    							Index117 Sports color mode, 47
    sRGB color mode, 46
    Startup screen
    creating, 70 to 71
    settings, 71
    user’s logo, see User’s Logo
    Status lights, 87 to 88
    Support, see Technical support
    S-Video cable, 12, 30
    Switching picture source, 42
    Sync, adjusting, 64, 93 to 94
    T
    Technical support, 11, 96 to 97
    Tele button, 45
    Temperature
    requirements, 102
    status light, 87 to 88
    Temperature, color, 62
    Text color mode, 46
    Theatre color mode, 46
    Through aspect setting, 48
    Tint setting, 62
    Tracking, adjusting, 64, 93 to 94
    Transporting projector, 83
    Troubleshooting
    blank screen, 89 to 90
    cut-off image, 91 to 92
    distorted image, 44 to 45
    image and sound problems, 89 to 95
    no signal, 90 to 91
    projector problems, 85 to 97
    remote control problems, 95
    tapered image, 44 to 45
    Turning off picture (using A/V Mute), 50
    Turning off projector, 40
    U
    Unpacking projector, 16
    USB
    cable, 16, 24 to 26, 34 to 35
    connecting external device, 34 to 35
    connecting for display, 24 to 26
    selecting TypeB port usage, 53, 67
    User’s Logo
    creating, 70 to 71
    display settings, 71
    V
    VCR, connecting, 27 to 32
    VGA video cable, 26, 32
    Video
    cables, 12 to 13, 16, 27
    connecting video equipment, 27 to 32
    formats, supported, 103 to 107
    selecting source, 42
    Video Signal setting, 64
    Volume, controlling, 52, 65
    W
    Warning lights, 87 to 88
    Warranty, 12
    Wide button, 45
    Windows display problems, 90
    Wireless Mouse setting, 54, 67
    Wireless mouse usage, 53 to 54, 67
    Z
    Zoom aspect setting, 48
    Zoom ratio, 101
    Zoom ring, 45
    Zoom setting, 45
    Zooming image, 45, 51 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Powerlite S6 Users Guide